In stock products will ship the same day if your order is placed by 4pm EST Mon-Fri.

Certifier40G The next generation Category 6 cable certifier

Certifier40G: Next Generation Cable Certifier Click for larger image Certifier40G PDF   Optimize productivity With its market-leading 9 second CAT-6A certification time per cable, the JDSU Certifier40G saves users 30 minutes each time they test 150 CAT-6A cables (compared to current solutions) and optimizes installer productivity. The revolutionary Touch2 design, with an intuitive touch screen at both ends, makes using the Certifier40G the easiest cable tester ever. A full screen at both ends minimizes the walking time for users in the field by initiating, viewing, and storing tests from either side of a link or channel. Unlike legacy testers, dual-ended fiber tests let installers at each test end quickly determine the problem cable. Minimize time spent transferring results off the tester with the capacity to store more than 2,000 full CAT-6A graph results. Future-proof The next-generation measurement engine can measure above and beyond the frequency limitations of current testers, ensuring many years of productive service. The Certifier40G can measure frequencies for all current and future cabling standards required for copper cables. Maximize value The JDSU Certifier40G drives maximum value with a flexible, cost-effective permanent link design, field-rugged casing, and simple modular upgrade path. The identical local and remote units simplify inventory and repair. The wide frequency range of the base feature set eliminates further licensing costs when upgrading to new technologies.   - Revolutionary large touch screen at both test ends reduces walking time - Complete TIA 568/ISO 11801 Copper certification and Tier I Fiber certification - Future-proof 1600 MHz test frequencies - Fastest CAT-6A/Class-FA and Tier I Fiber Pass/Fail test - Level-IV accuracy over the full Class-FA spectrum - Integrated planning software - Optional integrated fiber end-face inspection - Improves installer productivity by eliminating unnecessary walking between local and remote units, with a Touch2 system that lets them view and analyze test results at both ends - Protects your investment with the most advanced tester available that certifies beyond TIA-568 CAT-6A/ISO Class-FA 11801 standards, with a 1600 MHz measurement frequency - Quickly increases the productivity of new and experienced installers using the revolutionary large touch screen with an intuitive user interface - Accelerates testing and saves 30 minutes each time 150 CAT-6A cables are tested     Specifications       Test Parameters - Frequency range: 1 to 1600MHz - Tia-1152 Level IIIe and ISO/IEC 61935-1 Level-IV Accuracy   Copper Cable Tests - Attenuation (insertion loss) - Near-end crosstalk (NEXT) in pair-to-pair and power-sum - Return loss - Loop Resistance - Wiremap and shield - Cable Length - Total propagation delay - Delay skew between pairs   Fiber Cable Tests - Loss (in each direction) - Fiber Cable Length - Polarity   Test Standards - TIA-568-C.2 and TIA-1152 CAT-5, 5e, 6, 6A - ISO/IEC 11801, EN 50173 Class-C, D, E, EA, F, FA - TIA-568-C.3 Tier I Fiber Certification - ISO/IEC 11801 Tier I Fiber Certification   Power Supply - Removable/rechargeable lithium ion batteries provide up to 8 hours continuous operation - AC Power Adapter     Dimensions - Mainframe size: 9.13" x 4.9" x 3.41" - Mainframe height approx. 3lbs - Modular size: 3.3" x 2.8" x 1.1" - Memory - More than 500MB (more than 2000 test results) of internal flash memory - 1 GB USB Flash drive included for flexible test record storage   Connectivity - Probe interface connector - RJ45 Ethernet port - USB host and device interfaces - Talk set interface: 3.5mm stereo jack   Environmental - Operating temperature - Storage temperature - Relative humidity   Pass/Fail test times - TIA CAT-6/CAT-6A test times - ISO Class-F/FA test times - TIA/ISO Tier I Fiber test time JDSU NGC-4500-FA-NA Certifier40G Class-FA copper kit $8880.00 [Add to Cart] JDSU NGC-4500-MM-NA Certifier40G Class-FA copper and tier I fiber multimode kit (Class-FA adapters not included) $12550.00 [Add to Cart] JDSU NGC-4500-MMSM-NA Certifier40G Class-FA copper and tier I fiber multimode and singlemode kit (Class-FA adapters not included) $18495.00 [Add to Cart]