 |
|
Megger SCT Series Fiber Optic Adapters |
|
Click for larger image
|
As the number of fiber optic links in the network increases
it’s essential that your certification tester seamlessly
certifies both copper and fiber, efficiently combining all
media results together for analysis and reporting. The SCT-MMA
and SCT-SMA fiber optic adapters fulfill this need by
converting the SCT into a fully compliant Tier 1 multimode
and singlemode fiber optic certification tester. Now you can
confidently certify all of your copper and fiber optic links
with the snap of an adapter.
The SCT fiber optic solution offers powerful capability and
features including length measurement, two-fiber,
dual-wavelength loss measurements, single and bi-directional
fiber measurements, power meter mode, light source mode,
Fiber-Map and visual fault locator (VFL) capability. The SCT
Autotest differs from other units by returning a length
measurement and four loss measurements when testing dual
fibers.
|
Fully Compliant Tier 1 Certification
The SCT fiber optic adapters create a fully Tier 1 compliant
testing solution measuring length, loss, and polarity. The
SCT also differs from some units by performing
bi-directional testing on two fibers at two wavelengths
without exchanging the Primary and Secondary units.
Testing Fiber and Copper is a Snap
Fiber optic and copper certification is a snap with the SCT.
Switching between copper and fiber certification is faster
and more reliable than any other solution, simply snap in an
adapter. Only the SCT allows the user to create dual media
projects that store all necessary copper and fiber optic
certification parameters in one project. With dual media
projects and the ability to automatically recognize copper
and fiber optic adapters the SCT can seamlessly switch
between copper and fiber optic testing and project
parameters with the snap of an adapter.
Visual Fault Locator
The SCT fiber optic adapters include a visual fault locator
(VFL) as an easy to use troubleshooting tool. The VFL can
locate and visibly identify faults on fiber optic cables.
The VFL features a 635-nm visible red laser source. The
presence of the VFL’s red light indicates a trouble spot in
the fiber such as a break or sharp bend. The VFL can be used
with either multimode or singlemode fiber. The VFL creates a
continuous or modulated light source powerful enough to
escape from sharp bends and breaks in jacketed or bare fiber
as well as poorly mated connectors, making it ideal for
locating trouble spots in jumper cables, distribution
frames, splice strays, patch panels, cable splice points and
for tracing fiber runs.
|
| |
Features: |
|
| - |
Provides fully
compliant Tier 1 fiber optic testing and
reporting using Megger LCMD software. |
| - |
When testing dual
fibers the SCT Autotest performs a
length measurement and measures each
fiber at two wavelengths resulting in
four loss measurements. |
| - |
Performs
bi-directional testing on two fibers at
two wavelengths without the need to
exchange the Primary and Secondary units
at the end of the fiber optic link. |
| - |
Switching between
copper and fiber certification is faster
and more reliable than any other
solution by simply snapping in the
desired adapter. |
| - |
Dual media projects
store all necessary copper and fiber
optic certification parameters in one
project eliminating the need for the
user to modify certification parameters
when switching from copper to fiber, or
moving from one site to another. |
| - |
Powerful capability
and features including length
measurement, two-fiber, dual-wavelength
loss measurements, single and
bi-directional fiber measurements, power
meter mode, light source mode, Fiber-Map
and visual fault locator (VFL)
capability. |
| - |
Integrated VFL is
ideal for locating fiber optic trouble
spots in jumper cables, distribution
frames, splice strays, patch panels,
cable splice points and for tracing
fiber runs. |
|
| |
Specifications: |
|
| |
Fiber:
Multimode Fiber Optics Adapter IEC14763 Compliant.
Wave Lengths:
850/1300 nm
Singlemode Fiber Optic Adapter.
Wave Lengths:
1310/1550 nm
Input (Receiver) Connectors
Fixed SC Adapter
|
| |
Output (Source) Connectors
Fixed SC Adapter
|
| |
Source Type and Nominal Wave length
SCT-MM: 850 nm LED and 1300 nm LED
SCT-SM: 1310 nm FP laser and 1550 nm FP laser
|
| |
Source Power
SCT-MM: -20dBm at 850/1300
SCT-SM: -5dBm at 1310/1550
|
| |
Length Measurement
SCT-MM: 0 – 5000m of 62.5 or 50 μm fiber
SCT-SM: 0 – 15000m of 9 μm fiber
|
| |
Power Meter Type
InGaAs detector
|
| |
Power Measurement Dynamic Range
0 to -50 dB (1300nm, 1310 nm and 1550 nm)
0 to -45 dB (850 nm)
|
| |
Laser Safety (SCT-MM/SM)
Class I
|
| |
Dimensions (L x W x H), nominal
87 mm x 95 mm 29 mm (3.4” x 3.7” x 1.1”)
|
| |
Weight, nominal
0.16 kg (0.35 lb
|
| |
Output Power
²1 mW
|
| |
Operating Wavelength
635 nm nominal
|
| |
Output Modes
Continuous and modulated
|
| |
Output Connector
2.5 mm universal
|
| |
Laser Safety
Class II CDRH
|
| |
Operating Temperature
0º C to 40º C
|
| |
Storage Temperature
-20º C to 60º C |
|
|
|
|
|
| Megger 6111-766 SCT-MMA
Set of Two Multimode Fiber Adapters |
$3575.00 |
[Add to Cart] |
| Megger 6111-765
SCT-SMA Set of Two Singlemode Fiber Adapters |
$4590.00 |
[Add to Cart] |
|
SHOPPING CART
)
