 |
In stock products will ship
the same day if your order is placed by 4pm EST Mon-Fri.
Noyes Fiber Optic Test Equipment
|
View PDF
Adapter Caps |
Product Overview:
Combining the CSM1-2 optical power meter and CSS1-MM Dual
LED light source, the CKM-2 is a cost-effective test kit
designed for performing insertion loss measurements on
multimode fiber optic links.
The CSS1-MM Dual light source features 850 nm and 1300
nm LED output from a single output port and offers 2
modes of operation, continuous wave (CW) and user
selectable modulated Tone. The LED output is stabilized
to ensure accurate test results per current TIA/EIA
requirements and equipped with a fixed SC connector. An
easy to read LCD display with Backlight shows emitted
wavelengths [nm], tone frequency [Hz], and ow battery
condition.
The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features multiple test Tone detection
for fiber identification. The CSM1-2 stores optical
references for each calibrated wavelength. An easy to
read LCD display with Backlight shows measured power [dBm
or µW] or insertion loss [dB], calibrated wavelengths,
tone frequency [Hz], and Low battery condition. The CSM1
optical input port accepts Noyes thread-on style adapter
caps. One adapter cap, 2.5 mm Universal, is included. A
variety of Noyes thread-on style adapter caps (FC, SC,
LC, etc.) may be ordered separately.
Weighing only 0.4 lb each, both units are compact and
convenient for field use.The CSS1-MM Dual LED light
source, and CSM1-2 optical power meter are fully N.I.S.T.
traceable.
|
- Palm-sized, Rugged, Lightweight |
|
- Certify Multimode Fiber Links per TIA/EIA Standards |
|
- CW and Modulated Tone |
|
- 270, 330, 1000, and 2000 Hz Supported Tone |
|
- Power Measurements in dBm or μW; Insertion Loss in dB |
|
- Reference Power Level Storage |
|
- Large LCD with Backlight |
|
- AA Alkaline, Optional NiMH or NiCd |
|
- Automatic Power-Off Function |
|
- Battery Gauge |
|
- Free 50 µm and 62.5 µm Mandrels |
|
- Cost-Effective, Easy to Use |
|
- N.I.S.T Traceable |
|
Noyes Fiber Optic Test Equipment
|
View PDF
Adapter Caps |
Product Overview:
Combining the CSM1-2 optical power meter, CSS1-MM Dual LED
light source, and CSS1-SM Dual LASER source, the CKSM-2
is a cost-effective test kit designed for performing
insertion loss measurements on multimode as well as
single-mode fiber optic links.
The CSS1-MM and CSS1-SM sources feature Dual output, 850
/1300 nm LED or 1310/ 1550 nm LASER respectively, from a
single output port. Both CSS1 models offer 2 modes of
operation, continuous wave (CW) and user selectable
modulated Tone. The CSS1-MM LED and CSS1-SM LASER output
ports are stabilized to ensure accurate test results per
current TIA/EIA requirements. An easy to read LCD
display with Backlight shows emitted wavelengths [nm],
tone frequency [Hz], and Low battery condition. The
CSS1-MM model output port is equipped with a fixed SC
connector while the CSS1-SM output port is equipped with
Universal Connector Interface (UCI) base and SC adapter.
The CSM1-2 optical power meter operates at 850/ 1300/
1310/ 1550 nm and features multiple test Tone detection
for fiber identification. The CSM1-2 stores optical
references for each calibrated wavelength. An easy to
read LCD display with Backlight shows measured power [dBm
or µW] or insertion loss [dB], calibrated wavelengths,
tone frequency [Hz], and Low battery condition. The CSM1
optical input port accepts Noyes thread-on style adapter
caps. One adapter cap, 2.5 mm Universal, is included. A
variety of Noyes thread-on style adapter caps (FC, SC,
LS, etc.) may be ordered separately.
Weighing only 0.4 lb each, units are compact and
convenient for field use. The CSS1-MM Dual LED light
source, CSS1-SM Dual LASER source, and CSM1-2 optical
power meter are fully N.I.S.T. traceable.
|
- Palm-sized, Rugged, Lightweight |
|
- Certify Multimode Fiber Links per TIA/EIA Standards |
|
- CW and Modulated Tone |
|
- 270, 330, 1000, and 2000 Hz Supported Tone |
|
- Power Measurements in dBm or μW; Insertion Loss in dB |
|
- Reference Power Level Storage |
|
- Large LCD with Backlight |
|
- AA Alkaline, Optional NiMH or NiCd |
|
- Automatic Power-Off Function |
|
- Battery Gauge |
|
- Free 50 µm and 62.5 µm Mandrels |
|
- Cost-Effective, Easy to Use |
|
- N.I.S.T Traceable |
|
|
Noyes CKSM-2 Contractor Series Multimode and Single-mode Test Kit with
Set Reference |
$1,545.00 |
[Add to Cart] |
Noyes
MLP 1 Fiber Optic Loss Test Kit
|
View PDF
Adapter Caps |
Product Overview:
The MLP1 Test Kits are inexpensive
solutions for testing multimode and single-mode systems. By
joining the OPM 1 Optical Power Meter and the OLS 1 Optical Light
Source, the MLP 1 is a great kit for beginners or network owners. Two
versions of the MLP 1 Test Kit are available for testing Premises
networks, LAN, and Gigabit Ethernet. The Test Kit includes a light
source, power meter, protective rubber boots, adapter cap, 50 and 62.5 µm
mandrels, MLP1 user's guide, and carry case.
|
- Multimode and Single-mode Testing
|
|
- Loss Measurements at 850 nm and 1300 nm
|
|
- Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300nm
application, including Gigabit Ethernet (GBE)
|
|
- Includes 50 and 62.5 µm mandrels |
|
- Field portable, battery operated
|
|
- N.I.S.T. Traceable |
The MLP1-1S Test Kit
includes:
|
|
- OPM1-2C Optical Power
Meter and OLS1-1C Optical Light Source. |
The MLP1-2 Test Kit
Includes:
|
|
- Combines the OPM 1-2C Optical Power Meter and
OLS1-2C Optical Light Source |
|
Noyes MLP
4-2 Fiber Optic Loss Test Kit
|
View PDF
Adapter Caps |
Product Overview:
The MLP4-2 test kit combines the OPM4-2D optical power meter and
OLS1-Dual LED light source and is ideally suited for testing multimode
fiber optic networks.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single
output port and is easy to operate with only a power button and a
wavelength select button. The LED output is stabilized to ensure
accurate test results per current TIA/EIA requirements. This light
source offers 3 modes of operation: Dual wavelengths sending ID, single
wavelength sending ID, and CW. [Active Output], [Battery], and [External
Power] indicators identify the currently enabled operating mode, battery
charge status, and external power presence. The output port is equipped
with a removable SC (FC & ST available) adapter to allow the output
connector to be inspected and cleaned.
The OPM4-2D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS1-Dual. Multiple test Tone detection is
provided for fiber identification. The OPM4-2D stores optical references
for each calibrated wavelength. An easy to read Dual Wavelength LCD
display with Backlight shows measured power [dBm or μW] or insertion
loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and
the battery charge status.
In addition to being powered by two AA alkaline, the OPM4-2D or
OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH
battery pack.
The OPM4-2D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM4-2D and OLS1-Dual are fully N.I.S.T. traceable.
|
- Rugged, Handheld, Lightweight |
|
- Designed for Field Use |
|
- Certify Multimode Fiber Links per TIA/EIA Standards |
|
- Wave ID - Automatic Wavelength Identification and Switching |
|
- Dual Wave ID, Single Wave ID, CW |
|
- Large LCD with Backlight |
|
- Power Measurements in dBm or μW; Insertion Loss in dB |
|
- Reference Power Level Storage |
|
- AA Alkaline, Optional Rechargeable NiMH Battery Pack or AC
Adapter |
|
- Low Battery Indicator |
|
- Free 50 μm and 62.5 μm Mandrels |
|
- Cost-Effective, Easy to Use |
|
- N.I.S.T Traceable |
|
- Available with FC, SC or ST adapter Caps |
|
|
MLP4-2 Multimode Test Kit with Wave ID and Set Reference
Select Adapter Cap at Checkout |
$1,125.00 |
[Add To Cart]
|
Single-mode Test Kit with Wave ID and Set Reference
|
View PDF
Adapter Caps |
Product Overview:
The MLP5-2 test kit combines the OPM5-2D optical power meter and
OLS1-Dual LED light source and is ideally suited for testing multimode
fiber optic networks.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single
output port and is easy to operate with only a power button and a
wavelength select button. The LED output is stabilized to ensure
accurate test results per current TIA/EIA requirements. This light
source offers 3 modes of operation: Dual wavelengths sending ID, single
wavelength sending ID, and CW. [Active Output], [Battery], and [External
Power] indicators identify the currently enabled operating mode, battery
charge status, and external power presence. The output port is equipped
with a removable SC (FC & ST available) adapter to allow the output
connector to be inspected and cleaned.
The OPM5-2D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS1-Dual light source. The OPM5-2D stores
optical references for each calibrated wavelength. An easy to read Dual
Wavelength LCD display with Backlight shows measured power [dBm or μW]
or insertion loss [dB], calibrated wavelengths, tone signal [Hz],
wavelength ID, and the battery charge status. Up to 500 records per
wavelength of power or insertion loss measurements may be stored in
internal non-volatile memory.
Using the supplied Windows® compatible software and USB connection, test
records may be transferred to a PC for storage, display, analysis, and
printing.
In addition to being powered by two AA alkaline, the OPM5-2D or
OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH
battery pack.
The OPM5-2D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM5-2D and OLS1-Dual are fully N.I.S.T. traceable.
|
- Rugged, Handheld, Lightweight |
|
- Designed for Field Use |
|
- Certify Multimode Fiber Links per TIA/EIA Standards |
|
- Wave ID - Automatic Wavelength Identification and Switching |
|
- Dual Wave ID, Single Wave ID, CW |
|
- Large LCD with Backlight |
|
- Power Measurements in dBm or μW; Insertion Loss in dB |
|
- Reference Power Level Storage |
|
- Up to 500 Test Records per Wavelength Storage and Download
|
|
- USB Port for Download of Stored Records |
|
- AA Alkaline, Optional Rechargeable NiMH Battery Pack or AC
Adapter |
|
- Low Battery Indicator |
|
- Free Windows® Compatible Software to View, Print, and
Archive Test
Records |
|
- Free 50 μm and 62.5 μm Mandrels |
|
- Cost-Effective, Easy to Use |
|
- N.I.S.T Traceable |
|
- Available with FC, SCor ST adapter Caps
|
|
|
MLP5-2D Multimode Test Kit Wave ID, Set Reference, and Data Storage
Select Adapter Cap at Checkout |
$1,590.00 |
[Add To Cart]
|
Single-mode Test Kit with
Wave ID and Set Reference
|
View PDF
Adapter Caps |
Product Overview:
SLP4-6D Single-mode Test Kit with Wave ID and Set Reference
The SLP4-6D test kit combines the OPM4-4D optical power meter and
OLS2-Dual LASER light source and is ideally suited for testing
single-mode fiber optic networks.
The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single
output port and offers several modes of operation. Each wavelength may
be transmitted individually at CW or with user selectable modulated
Tone. Also, each wavelength may be transmitted with Wave ID. When
transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of
wavelengths in an alternating pattern. Associated with each operating
condition, the designated LED indicator will illuminate to identify the
currently enabled operating mode and emitted wavelength(s) along with
battery charge status and external power presence. The OLS2-Dual output
port is equipped with a UCI based removable adapter to allow the output
connector to be inspected and cleaned.
The OPM4-4D features automatic wavelength identification and switching
(Wave ID) when used with the OLS2-Dual, multiple test Tone detection for
fiber identification, and stores optical references for each calibrated
wavelength. A large dual-wavelength LCD display with backlight shows
measured power [dBm or µW] or insertion loss [dB], calibrated
wavelengths [nm], tone signal [Hz], wavelength ID, and estimated
remaining battery life. The OPM4-4D optical input port accepts a variety
of Noyes thread-on style adapter caps (ordered separately) to meet a
wide range of testing requirements.
The SLP4-6D test kit is fully N.I.S.T. traceable.
|
- |
Handheld, rugged, lightweight
|
|
- |
Wave ID (auto identification & switching) |
|
- |
Dual or single Wave ID, CW, Tone |
|
- |
270 Hz, 330 Hz, 1 kHz, 2 kHz Tone |
|
- |
Adjustable output
|
|
- |
Large LCD with backlight (OPM4-4D) |
|
- |
Power measurements in dBm or μW; insertion
loss in dB |
|
- |
Reference power level storage |
|
- |
Low battery indicator |
|
- |
Long battery life with 2 x AA alkaline |
|
- |
Cost-effective, easy to use |
|
- |
N.I.S.T traceable
|
|
- |
Available with FC, SC or ST adapter Caps
|
|
|
Applications: |
|
- |
Certify SM links per TIA/EIA standards
|
|
- |
Fiber identification prior to splicing
|
|
Noyes SMLP5-5 Fiber Optic Loss Test Kits
|
View PDF
Adapter Caps |
Product Overview:
The SMLP5-5 test kit combines the OPM5-2D optical power meter and OLS4
integrated LED and LASER light source and is ideally suited for testing
fiber optic networks with hybrid (single-mode and multimode) cables.
The OLS4 features 850 nm and 1300 nm LED output from a multimode output
port and 1310 nm and 1550 nm LASER output from a single-mode output
port. The LED and LASER outputs are stabilized to ensure accurate test
results per current TIA/EIA requirements.
This light source offers 4 modes of operation: Dual wavelengths sending
ID, single wavelength sending ID, CW, and modulated Tone. [Active
Output], [Tone], [Battery], and [External Power] indicators identify the
currently enabled operating mode, battery charge status, and external
power presence. Both output ports are equipped with removable SC (FC or
ST available) adapters to allow the output connectors to be inspected
and cleaned.
The OPM5-2D offers Wave ID, automatic wavelength identification and
switching, when used with the OLS4 light source. Multiple test Tone
detection is provided for fiber identification. The OPM5-2D stores
optical references for each calibrated wavelength. An easy to read Dual
Wavelength LCD display with Backlight shows measured power [dBm or μW]
or insertion loss [dB], calibrated wavelengths, tone signal [Hz],
wavelength ID, and the battery charge status. Up to 500 records per
wavelength of power or insertion loss measurements may be stored in
internal non-volatile memory.
Using the supplied Windows® compatible software and USB connection, test
records may be transferred to a PC for storage, display, analysis, and
printing.
In addition to being powered by two AA alkaline, the OPM5-2D or OLS4 can
be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM5-2D optical input port accepts Noyes thread-on style adapter
caps. Adapter caps are required for operation and must be ordered
separately.
The OPM5-2D and OLS4 are fully N.I.S.T. traceable.
|
- Rugged, Handheld,
Lightweight |
|
- Designed for
Field Use |
|
- Certify Multimode and
Single-Mode links per TIA/EIA Standards |
|
- Wave ID - Automatic
Wavelength Identification and Switching |
|
- Dual Wave ID,
Single Wave ID, CW, and Modulated Tone (on single-mode
output) |
|
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone |
|
- Large LCD with Backlight |
|
- Power Measurements in dBm or μW;
Insertion loss in dB |
|
- Reference Power
Level Storage |
|
- Up to 500 Test
Records per Wavelength Storage and Download |
|
- USB Port for
Download of Stored Records |
|
- AA Alkaline,
Optional Rechargeable NiMH Battery Pack or AC Adapter |
|
- Low Battery
Indicator |
|
- Free Windows®
Compatible Software to View, Print, and Archive Test
Records |
|
- Free 50 μm and 62.5 μm
Mandrels |
|
- Cost-Effective,
Easy to Use |
|
- N.I.S.T Traceable |
|
- Available with FC, SC or ST adapter Caps
|
|
|
SMLP4-4
Single-Mode & Multimode Test Kit with Wave ID
Select Adapter Cap at Checkout |
$2,495.00 |
[Add to Cart] |
|
SMLP5-5
Single-Mode & Multimode Test Kit with Wave ID and Data Storage
Select Adapter Cap at Checkout |
$2,800.00 |
[Add To Cart] |
|
|
Order
By Phone 1-800-543-4333
SHOPPING CART
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}