Hand Wire Wrapping & Wire Unwrapping Tool
|

Click for larger image |
| -
This two sided wire wrapping and unwrapping tool is intended to be two tools
in one. It is designed to produce perfect wire wrapping connections. |
| -
Precision, long-lasting tools for use where occasional wire wraps are
required or where power wire-wrapping tools are not practical. Compact and
convenient.
|
| -
To switch from wire wrapping to unwrapping takes only seconds - just a quick
change of the cap from one end to the other. |
|
| Jonard
HW-UW-224 Hand Wire Wrapping & Wire Unwrapping Tool 22-24 AWG |
$69.85 |
[Add to Cart] |
Hand Wrap & Unwrap Tools |

Click for larger image
|
These wire wrapping
tools do the job of two. These two sided tools allow for
quick change of wrapping to unwrapping and back, while
the unused side serves as a handle. 6" long.
| |
Part # |
Wire Gauge |
Wrapping Terminal Hole Dia |
Wrapping Terminal Hole Depth |
Unwrapping Terminal Hole Dia |
Unwrapping Hole Depth |
|
| |
WDUD-2000 |
20 |
.075" |
1.000" |
0.070" |
1" |
| |
WDUD-2224 |
22-24 |
.075" |
0.807" |
0.070" |
1" |
| |
WDUD-2600 |
26 |
.40" |
0.750" |
0.038" |
1" |
| |
WDUD-3000 |
30 |
.36" |
0.750" |
0.038" |
1" |
|
DSL Insulated Wrap and Unwrap Tool |

Click for larger image
|
Specifically designed
for DSL (Digital Subscriber Line) connections. The
wrapping side is designed for 24-26 AWG wire, and the
unwrap side is designed for 20-26 AWG wire. Comes with
an insulated handle for dielectric protection.
|
|
Part Number |
|
WDUD-26DS |
|
|
Wire Gauge |
|
24-26 |
|
|
Wrapping Terminal Hole Dia |
|
0.75" |
|
|
Wrapping Terminal Hole Depth |
|
0.750" |
|
|
Unwrapping Terminal Hole Dia |
|
0.070" |
|
|
Unwrapping Hole Depth |
|
1" |
|
| Jonard WDUD-26DS
DSL Insulated Wrap and Unwrap Tool |
$64.00 |
[Add to Cart] |
Hand Wrapping Tools |

Click for larger image
|
These tools with a
metal handle are for left and right hand use and are
compact and versatile. 6" long. |
| Jonard WD-2224 Hand
Wrapping tool for 22-24 gauge wire with a 0.75" diameter hole. |
$43.55 |
[Add to Cart] |
Hand Wrapping Tools |

Click for larger image
|
Wire wrapping tools
has a handle and shell, covered with a sleeve of
insulating material. With a 0.73" diameter x 0.750" deep
hole to accommodate a terminal. 5" long. |
| Jonard WDI-2426
Hand Wrapping Tool 24-26 gauge |
$96.75 |
[Add to Cart] |
Hand Wrap Tool |

Click for larger image
|
This manual wire
wrapping tool allows you to make uniform, gas-tight
solderless wrapped connections with 22 and 24 gauge
wire. Red handle. 5" long |
Hand Unwrapping Tool |

Click for larger image
|
This manual wire
unwrapping tool consists of a threaded steel bit and
blue plastic handle. A terminal hole is provided to
accommodate terminals with cross-section dimensions up
to 0.032 x 0.0622 inches. 5" long. |
| Jonard JIC-20551
Manual Wire Unwrapping Tool |
$15.75 |
[Add to Cart] |
Sleeved Unwrapping Tool |

Click for larger image
|
This versatile
unwrapping tool with a funnel-shaped spring loaded
sleeve. This is a single ended insulated tool with a
yellow plastic handle used for 20-26 gauge wire. 5 1/2"
long. |
Hand Unwrapping Tools |

Click for larger image
|
These double ended
tools with a metal handle are for left and right hand
use. 6" long. |
| Jonard UDLR-2026
Hand unwrapping tool for 20-26 wire with a 0.070" diameter hole |
$21.58 |
[Add to Cart] |
Hand Wire Unwrapping Tools
|

Click for larger image
|
Product
Overview: These wire unwrapping
tools are used to remove wire connections made with 20 thru 32 gauge wire. |
| Jonard UW4
Hand Wire Unwrapping Tools 20-26 AWG |
$30.00 |
[Add to Cart] |
|