 |
Fluke Networks CableIQ Qualification Tester
|
Click for larger image
|
CableIQ at a glance
|
- Qualifies - Sees if your existing cabling
has the bandwidth to support voice, 10/100, VoIP or Gigabit
Ethernet
|
- Troubleshoots - shows why existing cabling
cannot support the network's bandwidth requirement (e.g.
crosstalk at 11 meters)
|
- Discovers - detects what's at the end of
any cable and displays device configuration
|
- Identifies unused switch ports that can be
reallocated
|
- Graphically maps wiring
configuration and shows distance to faults with Intelligent
Wiremap
|
- Tests all copper cabling media:
twisted-pair, coax, and audio cabling
|
|
|
| |
Bandwidth QualificationWhen you deploy Voice over IP (VoIP) or Gigabit
Ethernet, you want to make sure that the existing cabling will support the
bandwidth requirements of your new equipment. Your cabling was certified,
but moves adds and changes have rendered many links incapable of running
desired speeds. CableIQ quickly reveals whether a link, including patch
cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your
cabling's bandwidth capabilities before upgrading can prevent countless
hours of future downtime and labor hours wasted on unnecessary
troubleshooting.
|
| |
Cable Troubleshooting
|
| Plug into any cable, patch panel, or wall jack
and see both the cable details (length/wiremap) and far-end device details
(speed/duplex settings) at once. A series of both cable and network test
functions help you isolate connectivity problems. For instance, if Discover
mode shows duplex settings are matched but the problem persists, run
Autotest to see if the cabling can support the required bandwidth. If a link
is not qualified, CableIQ provides detailed information on the nature and
location of cabling performance faults such as crosstalk or large impedance
changes. With CableIQ your techs can close trouble tickets faster by cutting
cable troubleshooting time in half.
|
| |
Easy to Use
|
- Intuitive user interface and graphical display
guides user with little or no training required.
- Rotary knob makes learning easy and operation simple – you always know
what test mode is selected
- Portable, lightweight, rugged ergonomic design for easy field use
- Four AA batteries - Long lasting battery life for several weeks of testing
- Remote adapter doubles as a protective endcap.
|
| |
Click for larger image
|
CableIQ Qualification Tester Includes
- CableIQ with remote adapter
- CableIQ Reporter software CD
- (2) RJ45-RJ45 patch cord
- USB cable
- Coax "F" push-on adapter
- Owners CD and quick start guide
- (4) AA batteries, soft carry case
|
Click for larger image |
CableIQ Advanced IT Kit Includes
- CableIQ main
unit with remote adapter
- CableIQ Reporter software CD
- IntelliTone 200 Digital Probe
- Remote IDs #2-7
- (2) RJ45-RJ45 patch cord
- USB cable
- Coax "F" push-on adapter
- 75-ohm coax patch cord
- RJ45/11 universal coupler
- RJ11-RJ11 patch cord
- Owners CD and quick start guide
- (4) AA batteries
- test accessory soft pouch
- hard carry case
|
Click for larger image
|
CableIQ Residential Qualifier
Kit Includes
- CableIQ main unit
(CIQ-100)
- (2) RJ45 patch cord
- (2) RJ11 patch cord
- USB cable
- Bare wire adapter
- Speaker wire adapter
- Coax cable
- Coax BNC adapter
- Coax RCA adapter
- (50) "Qualified" labels
- CD ROM user manual
- Getting started guide
- (4) AA batteries
- Soft carrying case
|
|
|
|
| |
|
CableIQ Accessories |
CIQ-IDK24 CableIQ Remote
Identifier Kit
Remote identifier numbers 2-4 |
$225.00 |
[Add to Cart] |
CIQ-IDK57 CableIQ Remote
Identifier Kit
Remote identifier numbers 5-7 |
$225.00 |
[Add to Cart] |
CIQ-COAX CableIQ Coax Adapter
Kit
F-connector, BNC and RCA connectors |
$19.00 |
[Add to Cart] |
|
CIQ-SPKR CableIQ Speaker Wire Adapter |
$52.85 |
[Add to Cart] |
|
CIQ-RJA CableIQ RJ45/11 Modular Adapter |
$43.20 |
[Add to Cart] |
|
CIQ-CIT CableIQ Hard Carrying Case |
$75.95 |
[Add to Cart] |
|
CLIP-SET Clip Set includes RJ45 to 8-clip test lead |
$43.50 |
[Add to Cart] |
|
TPAK ToolPak Hanging Kit |
$30.65 |
[Add to Cart] |
|
CIQ-QL CableIQ "Qualified" labels reorder (50-pack)
|
$6.70 |
[Add to Cart] |
|
MT-8200-63A IntelliTone
200 Probe IntelliTone 200 Probe, RJ11 and RJ 45 patch
cables, lanyard, owners CD and quick start guide, 9 volt battery |
$103.95 |
[Add to Cart] |
|
MT-8200-53A IntelliTone 100
Probe IntelliTone 100 Probe, lanyard, owners CD and quick
start guide, 9 volt battery |
$75.95 |
[Add to Cart] |
For more information on
the |
|
CableIQ Network Qualifier Click Here |
|
SHOPPING CART
)
)
)
)
