Home > Cable Testers > Fluke 635 Quickbert > Specifications
635 QuickBERT -T1 Specifications
 

Free Ground Shipping!
On Orders Over $99.00

 

 

 

in the 48 Contiguous States

   
   HOME | CONTACT US
Buttsets
Cable Assemblies
Cable Certifiers
Cable Testers
Coaxial Products
Connectivity
Crimp Tools
Cutters / Scissors
Fiber Optic Supplies
Fiber Optic Cleaning
Fiber Optic OTDR's
Fiber Optic Testing
Fiber Tools
Fiber Tool Kits
Fiber Media Converters
Fishing & Pulling
Fusion Splicers
Hand Tools
Hole Making
Holster Tool kits
Multifunction Tools
Multimeters
Power Tools
Printers - Brady
Punchdown Tools
Racks and Shelves
Test Adapters
Tone & probe Kits
Tool Bags & Cases
Tool Kits
Wire Managers
Wire Strippers
Wire Wrap Guns
 
Manufacturers Index
   

 

 

 

 

Order By Phone 1-800-543-4333
 

In stock products will ship the same day if your order is placed by 4pm EST Mon-Fri.
 

635 QuickBERT -T1 Specifications

Primary T1 Receiver Range:
Bridge: 6 to -36 dB
Term: 6 to -36 dB
Monitor: -15 dB to -24 dB

Framing: NONE, D4, ESF, SLC® 96

Line coding: AMI, B8ZS

Patterns: QRSS, 1 IN 7, 2 IN 8, 3 IN 24, ALL 0'S, ALL 1'S, 1:1, NET55, OCT55, DALY55, USER (default = 1:16)

Status/history: AMI (status only), B8ZS, Signal Present, Out of Frame, Blue Alarm (AIS), Ones Density, Excess Zeros, Yellow Alarm, DS1 Idle Signal (all Tx patterns are frame aligned), Pattern Sync Loss

DS0 drop: Selected DS0 channel to eight data bit LEDs and speaker

DS0 signaling types: Robbed Bit, CCIS, E-Bit

DS0 Signaling Bits: A, B, C, D


Reference T1 Receiver Range: 0 to -36 dB

Compatibility: AT&T® TA24/CB113


Transmitter Output Line codes: AMI or B8ZS

Framing: NONE, D4, ESF, SLC96

Frequency: 1544000 Hz ± 5 ppm

Patterns: QRSS, 1 IN 7, 2 IN 8, 3 IN 24, ALL 0'S, ALL 1'S, 1:1, NET55, OCT55, DALY55, USER, THRU

LBO: Fixed at 0 dB

Tx clock source: Internal, derived from received data, or external

Loop codes: CSU, NIU4, NIU5, NETWRK (ESF), LINE (D4), LINE (ESF), PYLD (ESF), ARM (D4), ARM (ESF), HTU-R,HTU-C, HRE1, HRE2, NREM, NLOC, NDU1, NDU2, CREM, CLOC, CDU1, CDU2


Specification Compatibility ANSI T1.403, AT&T PUB62411

Connectors Rx T1 Receiver Term/Mon/Bridge: Bantam jack

Tx T1 Transmitter: Bantam jack

Ref T1 Receiver: Bantam jack

Auxiliary power: DC power jack

Headset: 3.5 mm phone plug- stereo (for customer-provided headphones)


Results Display: 4 x 20 liquid crystal display (LCD)

Clock slips: Positive number means reference clock faster; negative number means reference clock slower

Errors: BIT ERR, BPV ERR, FRM ERR, CRC ERR, FREQDEV

Signal: DS1 Freq, DS1 Level, DS0 Freq, DS0 Level

DS1 Freq accuracy: ± 5 ppm, 32° to 104° F (0° to 40°C)

DS1 Freq resolution: 1 Hz

DS1 Freq range: 1544000 ± 10,000 Hz

DS1 Level range: 6 dBDSX to -40 dBDSX

DS0 Freq accuracy: ± 1.5 Hz

DS0 Level accuracy: ± 0.2 dBm


Power Battery Pack: Rechargeable, nickel metal hydride (NiMH); 3.5 amp-hours

Battery life: Approximately six hours of continuous operation

Low battery: Red LED illuminates, indicating recharge is needed

Auxiliary power: 9 - 12 VDC, 1000 mA


Environmental Operating temperature: 32° to 122°F (0° to 50°C)

Storage temperature: -4° to 140°F (-20° to 60°C)

Humidity: 95% maximum, non-condensing


Physical Size: 1.75" H x 5" W x 9" L (4.4 cm x 12.7 cm x 22.8 cm)

Weight: 1 lb, 10 oz (0.7 kg)

 

 
 

Hot Products & Promotions


 

This Months Special

 

Datacomtools Deals