| |
|
In stock products will ship
the same day if your order is placed by 4pm EST Mon-Fri.
 |
LinkRunner Pro Network Multimeter
|
The essential link tester for today's Gigabit Ethernet, PoE, and 802.1X
networks. Product Capabilities
 Empower
frontline technicians with more problem solving capabilities
Following in the tradition of the original LinkRunner, LinkRunner Pro was
designed to provide desktop support and network technicians with a simple,
dedicated tool for resolving the most common PC user and device connectivity
issues.
Because of rapid network evolution, today’s connectivity problems are much
more complex than they used to be. Higher bandwidth requirements have
expedited Gigabit proliferation. Greater security threats have necessitated
tighter control measures like 802.1X. And technologies like VoIP and WLAN
have given rise to a greater reliance on PoE for power. LinkRunner Pro
recognizes these changes, and empowers technicians to address today’s new
challenges.
Expedite trouble ticket resolution with professional link status reports
When no test documentation is available, closing trouble tickets can be a
frustrating and time-consuming process. Finger pointing among different
groups and redundant testing are just a couple of the wastes that occur.
With today’s focus on operational efficiency, IT departments don’t have time
for wastes like these. LinkRunner Pro can eliminate finger pointing and
reduce redundant testing by generating objective, professional link status
reports that can be printed or routed electronically.
| - Link at 10/100/Gig – identify device capabilities and confirm actual
connected speed/duplex status |
| - Ping key devices – measure response statistics of DHCP, default
router, DNS server, and other key devices or URLs |
| - Verify 802.1X settings – authenticate on 802.1X secured networks;
enter EAP type, user name, certificates, and password |
| - Detect PoE service – verify availability, voltage level, and pairs
of Power over Ethernet per IEEE 802.3af specifications |
| - Identify port (C/E/LLDP) – identify nearest switch address,
slot, and port with Cisco, Extreme, and IEEE Link Layer Discovery
Protocols |
| - Test cable wiremap – test wiremap and length; detect miswires,
shorts, split pairs or opens; measure distance to faults with TDR |
| - Locate and ID cable – use IntelliTone digital toning, hub blink
feature, or optional cable IDs to locate cables at patch panels or wall
jacks |
| - Document test results – save link, ping, PoE, security, and cable
test results in unit and upload to PC with USB cable |
Click here
for PDF
|
| Fluke Networks
LRPRO-1000 LinkRunner Pro Network
Multimeter |
$995.00 |
[Add to Cart] |
LinkRunner
Pro Network Multimeter Includes: LinkRunner Pro, WireView Cable ID #1,
LinkRunner Connect software CD, USB cable, LinkRunner Pro Getting Started
Guide (English, Spanish, French, German, Portuguese, Japanese, Simplified
Chinese), four (4) AA alkaline batteries
|
| Fluke Networks
LRPRO-KIT
LinkRunner Pro Extended Test Kit |
$1499.00 |
[Add to Cart] |
LinkRunner
Pro Extended Test Kit Includes: LinkRunner Pro, IntelliTone Pro 200 Probe,
WireView Cable IDs #1-6, CLIP-SET RJ45 to 8 alligator clip bare wire
adapter, LinkRunner Connect software CD, test accessory soft pouch, USB
cable, LinkRunner Pro Getting Started Guide, IntelliTone Pro Getting Started
Guide, four (4) AA alkaline batteries, one 9V alkaline battery, packaged in
a deluxe Fluke Networks carry case
|
| Fluke Networks
CIQ-GSV CableIQ
Gigabit Service Kit |
$2185.00 |
[Add to Cart] |
| CableIQ
Gigabit Service Kit Includes: CableIQ Qualification Tester, LinkRunner Pro
Network Multimeter, IntelliTone Pro 200 Probe, CableIQ Remote Identifiers
#1-7, WireView Cable ID #1, CableIQ Reporter software CD, RJ45-RJ45 shielded
patch cords (2), USB cable, coax “F” push-on cable, RJ45/RJ11 universal
coupler, USB cable, test accessory soft pouch, CableIQ Getting Started
Guide, LinkRunner Pro Getting Started Guide, IntelliTone Pro Getting Started
Guide, eight (8) AA batteries, one 9V battery, packaged in a deluxe Fluke
Networks carry case |
|
LinkRunner Duo
|
More info on the LRDUO
More info on the LRDUO-CE |
Pocket Carrier Ethernet Test Set
Fluke Networks’
LinkRunner Duo CE Pocket Carrier Ethernet Test Set
reduces costs while increasing customer
satisfaction.
Stop the guesswork when troubleshooting new
circuits. Quickly verify link integrity and signal
strength. Use PING to verify connectivity to
expected devices, response time, and VLAN settings.
Find customer issues such as speed and duplex
mismatches, authentication and addressing problems,
and bad ports on copper or fiber.
Get more out of your test sets by using LinkRunner
Duo CE as a remote target for performance testers
such as the Fluke Networks MetroScope™ and those
from other manufacturers. It supports RFC 2544 and
ProVision™ tests including multiple streams, and
Q-in-Q on Layer 1, 2, or 3 networks
| |
LinkRunner Duo CE
Features: |
|
|
- |
Link Verification of Fiber and Copper
Circuits at 10/100/1000MBps – Quickly
determine if the circuit is up or not. |
|
- |
Performance Testing with MetroScope and
other Popular Test Sets – Use as a remote
device for ProVision™, RFC 2544 and other
performance tests with testers from Fluke
Networks, JDSU, Sunrise, Exfo, and more. |
|
- |
Layer 1, 2, and 3 Loopback - Configurable
loop back to filter frame type and swap MAC
and/or IP addresses. Manual or DHCP IP
configuration. |
|
- |
Fiber Power Measurements – Make sure that the incoming signal meets
requirements. |
|
- |
PING Testing – Measure availability and
response performance for key devices or
URLs.0 |
|
|
VLAN Verification - Configurable VLAN and
priority settings. |
|
- |
Designed for the Field – Small (fits in a
shirt pocket), lightweight (10oz), battery
operated and rugged. Operates for over three
hours with a removable Li-ion battery pack,
four AA batteries, AC or optional car
charger (optional). |
|
- |
CPE and Cable Testing |
|
|
|
|
|
|
Fluke Networks LRDUO Includes LinkRunner Duo, Wireview Cable
ID #1, LinkRunner Connect Software CD, USB cable, RJ45 coupler, LinkRunner
Duo gettingstarted guide, four (4) AA alkaline batteries |
$1,489.00 |
[Add to Cart] |
|
Fluke Networks
LRDUO-CE LinkRunner Duo Carrier Ethernet
Tester, includes LinkRunner Duo, Reflector option, Lithium Ion Battery Pack
and AC charger,
LinkRunner Connect software CD, USB cable, Getting Started Guide, AA battery
pack and four AA alkaline batteries |
$1,840.00 |
[Add to Cart] |
|
Fluke Networks
LRDUO-FTK Includes LRDUO, SimpliFiber Pro
optical power meter, 850/1300 multimode source, VisiFault VFL, FT120
FiberViewer, FindFiber Remote ID source, and carrying case; SC, ST, and LC
power meter adapters |
$3,745.00 |
[Add to Cart] |
|
|
|
|
|
|
|
|
|
|
|
Hot Products & Promotions |
|
|
|
|
|
|
|
|
|
This Months Special: |
 |
|
|
|
|
|
Featured Product
Line: |
 |
|
|
|
|
|
|
|
|
SHOPPING CART
