ETS8 Cable Tray Cutter

Tired of using bolt cutters to cut wire mesh cable tray? Is the effort to close the handles starting to result in repetitive motion injuries? Does it slow you down trying to get the large head of the bolt cutter into the right position? If your answer to any of these questions is yes, the new Greenlee ETS8 battery-powered cable tray cutter may be the tool you need. The ETS8 cuts fast. It only takes 2 seconds to cut 0.191" (4.9 mm) diameter cable tray wires. The ETS8 is also light weight, weighing only 3 lbs. (1.3 kg) so it’s easy to move from cut to cut. This is actually less than most bolt cutters, and allows the user to operate the tool with one hand while positioning the cable tray with the other hand. The cutting head of the ETS8 rotates 330° and is small, so it’s easy to get into the right cutting position. And, finally, you don’t need to worry about running out of battery power.  The ETS8 can make about 250 cuts of 0.191" (4.9mm) diameter wire per battery charge, and comes with two batteries so you can always have one charging.  The ETS8 cuts flush with the cross wire and it doesn't leave a burr.  And it automatically retracts after a cut is complete to be ready for the next cut.  The ETS8 was designed to cut wire mesh cable tray wire, but it can also cut other wires up to 5/16" (8mm) diameter such a threaded rod and steel bolts.