 |
Fluke
Networks Can wrench
|
 |
Fluke Networks’ can wrenches feature color-coded socket ends
and built-in ribs on the barrel for user comfort, safety,
and greater torque power. The two hex head sockets (7/16
inch and 3/8 inch) have reduced outside diameters that fit
all new network interface devices. The 7/16 inch is black
oxidized to easily distinguish it from the 3/8 inch
zinc-plated socket end. Separate models of the can wrench
are available with wire strippers built into the barrel. The
stripper head has two slots with one slot for the outside
jacket of a 4-wire "quad", and the other slot for individual
conductors (22-gauge model or 24-gauge model). |
Paladin Can wrench
|
 |
Description
Access telephone termination panels and removes outer jacket
from telephone cable.
Features
3/8" (9.5mm) & 7/16" (11mm) hex sockets to open panels
Separate stripping cavities to strip PVC insulation from 22
and 24 AWG (.34 mm2 & .20 mm2) telephone cable |
Jonard Can
Wrench
|
 |
Double end can socket wrench, 3/8" and 7/16" hex, orange
plastic handle available in either our standard or ergonomic
can wrench designs.
Used in placing fuses in cable terminals and connecting
wires to fuses and binding posts. The walls on both sockets
are thin enough so they can be used to work locking devices
on most terminals and cabinets. 7" long.
|
|
Jonard M-216C/REX Can Wrench Ergonomic 1” Dia. Handle, Round Outer Socket
|
$11.95 |
[Add to Cart] |
Jonard Can Wrench
|
 |
Double end can socket wrench, 3/8" and 7/16" hex, orange
plastic handle available in either our standard or ergonomic
can wrench designs.
Used in placing fuses in cable terminals and connecting
wires to fuses and binding posts. The walls on both sockets
are thin enough so they can be used to work locking devices
on most terminals and cabinets. 7" long.
|
|
Jonard M-216C/RX Can Wrench Standard Handle, Round Outer Socket
|
$10.45 |
[Add to Cart] |
Jonard Can Wrench
|
 |
Double end can socket wrench, 3/8" and 7/16" hex, orange
plastic handle available in either our standard or ergonomic
can wrench designs.
Used in placing fuses in cable terminals and connecting
wires to fuses and binding posts. The walls on both sockets
are thin enough so they can be used to work locking devices
on most terminals and cabinets. 7" long.
|
|
Jonard M-216C/EX Can Wrench Ergonomic 1” Dia. Handle, Hex Outer Socket
|
$11.95 |
[Add to Cart] |
|
SHOPPING CART
