 |
|
VDV MultiMedia Cable Tester Kit
|
Click for larger image
|
- Comprehensive testing for Voice, Data and Video applications.
- Designed for testing in residential and commercial environments.
- Supports RJ11/12, RJ45, and coax F-Connector cabling and interfaces.
- Easy-to-read LCD display with PASS/Miswire indicators, wiremap
display and troubleshooting modes.
- Multi-tone support for cable tracing and fault isolation.
- Convenient internal storage for remote.
- Capacity to support additional remotes
|
JDSU / Test-Um Testifier
|
Click for larger image
|
Product Overview:
Perform essential physical cabling tests and wiring
verification.
|
-
Identifies line condition: Shows opens, shorts, miswires, split pairs, PASS
and FAIL results fast - on a clear, full alpha/numeric LCD display
|
|
-
Supports a comprehensive set of wiremapping locators for cable location |
|
-
Up to 20 cable end locations at a time can be identified and tagged.
|
|
-
Sends tone for tracing cabling
|
|
-
Configurable signal can be generated to find and fix the position on any
type of cable - either exposed or hidden, in ceilings or behind walls |
|
|
CableRater dB Loss Meter
|
 |
| - |
Measures dB Loss and
gain in cable distribution systems |
| - |
Verify installation
before cable TV service is connected |
| - |
Transmitter simulates
frequency and level of TV channel 3 |
| - |
Lightweight and
affordable |
| |
Features: |
|
|
-
|
Check for: |
Bad Cables
Bas Splitters
Bas Switches |
Bad Connectors /
Connections
Bad Amplifiers / Verify Amplifier Gain
Excessive Loss in Cable |
|
-
|
Real time measurement
allows for checking for intermittents |
|
- |
Efficient Transmitter
permits hours of testing without replacing
battery, plus built in battery test |
|
- |
Receiver contains a blue
backlit display which allows for testing in
poorly lit areas. |
|
- |
Measure dB loss or gain
from main entrance to each TV, including
Loss or Gain in all cable, connectors,
switches, splitters and amplifiers in
between |
|
- |
Receiver is user
configurable for continuous operation or
timed auto shut-off |
|
- |
Digital display on
receiver allows for easy accurate
measurement |
|
- |
F Connectors for easy
connection to standard TV distribution
systems |
|
- |
Works with typical "Power
Injector" amplifier systems |
|
- |
Projected against 60Hz
line cross |
|
- |
±20dB Loss/Gain
measurement range, 0.1 dB Resolution |
|
- |
Tests all types of RG-59
and RG-6 Coaxial cables |
|
- |
Includes: Transmitter,
Receiver, Patch Cable, Carrying Case and 2
9-volt batteries. |
|
|
|
WireMaster Coax - 8-way Coaxial Cable Mapper
|
 |
| |
Features: |
|
|
-
|
8 remotes with BNC
connectors included |
|
-
|
Tests for opens and
shorts |
|
- |
AC/DC overvoltage warning
LED |
|
- |
120VAC line cross
protection |
|
- |
Real-time test helps
identify intermittents |
|
- |
Power latch function
switch to prevent accidental turn-ons |
|
- |
use to identify coaxial
cables in CCTV security and Surveillance
systems, broadcast TV, Residential Video
systems, and Cable TV (with F adaptors). |
|
- |
Identify any pair of
wires (shielded or unshielded) such as
audio, video, phone lines, etc. using
appropriate adapters |
|
- |
Battery self test |
|
- |
Uses 1 standard 9-volt
alkaline battery |
|
- |
Includes: Padded carrying
case and BNC male-to-make adapter |
|
- |
One year warranty |
|
|
| Triplett 3274
WireMaster Coax - 8-way Coaxial Cable Mapper |
$37.95 |
[Add to Cart] |
|
|
SHOPPING CART
)
)
