| |
|
In stock products will ship
the same day if your order is placed by 4pm EST Mon-Fri.
 |
LanTEK II Series Cable Certifier |
|
|
LanTEK II offers the best speed, performance and price
available today. Nine second Cat 5e and 14 second Cat 6
tests with full performance data plus 10 Gigabit Alien
Crosstalk testing that’s more than 4x faster than other
systems make LanTEK II the ultimate copper certification
platform. The patented universal adapter systems lets
you certify most cabling with off-the-shelf patch cords
saving time and money by eliminating the need for
proprietary permanent link adapters.
The optional FiberTEK FDX modules provide the world’s
only dual wavelength, bidirectional fiber certification
available that’s more than 3x faster than existing
testers. Three models provide the needed performance
without the added expense; choose from 350 MHz/Cat 6,
500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy
independently verified by ETL.
LanTEK II also offers ultimate versatility with options
for certification of TERA, GG45 and EC7 category 7/7A
systems, plus M12 industrial Ethernet and coaxial test
adapters.
|
| |
|
Features: |
|
|
| |
- |
Best price/performance
options - models ranging from 350 MHz to 1000
MHz for Category 6/ISO E through Category 7A/ISO
FA
certification. |
|
| |
- |
High speed testing saves time and money |
|
| |
- |
Most internal memory available - store over 1700
Category 6/ISO E tests with graphs |
|
| |
- |
Patented testing method - eliminate expensive
permanent link adapters and test with patch
cords for most installation |
|
| |
- |
Extraordinary fast fiber testing with FiberTEK®
FDX - the first dual wavelength, bidirectional
fiber certification tool |
|
| |
- |
Large, ultra-bright display - 4.3 in. wide
screen display with white LED backlighting
provides easy viewing of high-frequency data
plots |
|
| |
- |
350 MHz & 500 MHz models are fully upgradable to
1000 MHz |
|
| |
- |
Smart lithium-ion battery technology - 18 hour
battery life with self calibrating “fuel gauge”
for accurate capacity readings. |
|
Universal Link Testing
The patented testing process eliminates the
need for costly permanent link adapters. By using
universal test adapters for Category 5e through 6A
certification, patch cords are typically the only item
that needs to be replaced when worn or damaged. This
eliminates the wait and expense of proprietary adapters
meaning more time is spent testing and less time
searching for replacement parts.
Channel and Permanent Link Testing with One
Adapter
Only LanTEK allows permanent link and
channel certification without changing adapters. The
patented DualMODE function allows cabling to be
certified to two different standards with one press of
the Autotest button; half the time it would take with
any other certifier. Certify cabling to both Category 6
permanent link and Category 6 channel link standards at
the same time, satisfying requirements from cabling
manufacturers and end users without costing any more
time in the field. Or certify cabling to existing
current standards and proposed future standards which
eliminates retesting at a later date.
Fast Test Times
Category 5e certification in 9 seconds,
Category 6 in 14 seconds, and Category 6A in only 16
seconds with graphs! Plus enjoy fiber certification
that’s 3x faster and 10 gigabit alien crosstalk
certification that’s 4x faster than the competition.
Most Memory Capacity
LanTEK II has 7x the storage capacity as
competitive certifiers. Save an astonishing 1700
Category 6 results with graphs. If the memory fills,
simply off-load the data to a USB thumb drive for
portability and archiving
Cut the Power Cord
The new smart lithium battery technology provides an
amazing 18 hours of use in the field. The revolutionary
battery technology has two charging modes that offer the
best flexibility available. Slow charge the battery
overnight while it is inside the LanTEK II, or remove
the battery and plug in to its dedicated charging port
for a quick 5 hour charge. Plus, the battery’s internal
fuel gauge automatically self adjusts every time the
pack is completely discharged and recharged, providing
accurate charge readings over the life of the battery
pack.
Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000.
The LanTEK II-350 offers 350MHz of frequency sweep to
certify Category 6 cabling and below. LanTEK II-500
sweeps to 500MHz, and is the only certifier designed
specifically for Category 6A cabling. LanTEK II-1000 is
the world’s fastest certifier with a full 1GHz of
certification bandwidth to go well beyond Category 7/ISO
Class F (600MHz), all the way to ISO Class FA (1000MHz)
standard to support shared cabling applications such as
CATV, Ethernet and voice in the same cable.
Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power
in the fingertips of the user. The main test grid
display can be customized to display and sort by
virtually any test parameter allowing for quick
identification of tests that are below desired
performance margins. Quickly scan through plot data by
choosing a plot type and scrolling through the test list
to instantly refresh the plot for each test. This makes
visually scanning through reports and searching for
anomalies a breeze. IDC offers many reporting options
such as detailed, brief, and single line reports, plus
export data in XML, CSV and PDF formats. Plus the unique
ability to customized the plots by inverting the scales,
toggling linear or log frequencies and even adjusting
colors makes IDC the most user friendly and powerful
cable reporting software ever. |
|
| |
Specifications: |
|
|
|
|
|
|
|
|
|
| |
Handset Dimensions: |
|
Height/Width/Dept:
10"/5"/2.1" |
|
| |
Handset weight w/ battery |
|
Display 2.4lbs/1.1kg;
Remote: 2.3lbs/10.kg |
|
| |
Battery |
|
Lithium ion, 7.4VDC,
6.6AH; Input: 12V/A DC; Typical operating time:
18 hours (new battery running a Cat6 test every
2.5 minutes, full backlight); Charge time: 4
hours quick charge with battery removed from
handset, 6 hours inside handset. |
|
| |
Input Power |
|
Handset: DC 12-15V, 2A;
Line/mains power: AC 110-240V |
|
| |
Display |
|
4.3” wide screen TFT, 480 x 272 pixel, 95 x 54mm
viewable area |
|
| |
Connectivity |
|
168 pin ultra low crosstalk, mini-USB device
port, USB host port (display handset only), four
pin serial port (service use only), 1/8” talkset
jack, power/charging jack |
|
| |
Frequency Range |
|
LanTEK II-350: 1-350MHz, LanTEK II-500:
1-500MHz, LanTEK II-1000: 1-1000MHz |
|
| |
Memory |
|
Non-volatile flash, storage capacity for 1700
TIA-Cat 6 tests with graphs. Tests can be copied
to USB flash drive, up to 64GB. |
|
| |
Measurements |
|
Wire map, DC loop resistance length,
capacitance, NEXT, insertion loss (formerly
attenuation), ACR-N (formerly ACR), return loss,
average impedance, propagation delay, delay
skew, power sum NEXT, power sum ACR-N (formerly
power sum ACR), ACR-F (formerly ELFEXT), power
sum ACR-F (formerly power sum ELFEXT), alien
crosstalk (with optional AXT testing kit) |
|
| |
Length Measurements |
|
0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.) |
|
| |
Supported Cable Types |
|
Supported cable types TIA/EIA Category 3, 4, 5,
5E, 6 and 6A: 100Ω, ISO/IEC Class C, D, E, EA,
F, FA: 100Ω, Cat 6/6A Class E/EA RJ-45 permanent
link adapters: shielded and un-shielded cable,
universal adapters provide channel, permanent
link and basic link measurements. |
|
| |
Supported Connectors |
|
Additional adapters: GG45, ARJ45, TERA, EC7
(MMCPRO3000), Coax 50-75Ω (BNC connector), M12
industrial |
|
| |
Tone Generator |
|
Integrated into display and remote handset,
compatible with standard analog inductive
probes, selectable tone (high/low/warble)
500/600 Hz, selectable pin output.
|
|
| |
Input Protection |
|
100V @ 25mA |
|
| |
Operating temperature |
|
0°C to 50°C, non-condensing |
|
| |
Storage temperature |
|
-20°C to 70°C, non-condensing |
|
| |
Vibration/Shock |
|
MIL-PRF-28800 F, Class 3 |
|
| |
Supported languages |
|
Chinese, Czech, Danish, Dutch, English, French,
German, Italian, Korean, Norwegian, Polish,
Portuguese, Russian, Spanish, Swedish |
|
| |
Accuracy |
|
Baseline: Certified by ETL to meet IEC 61935
Level III/IIIe/IV; Channel/Permanent link: TIA
568-B.2-2 and IEC 61935 Level III/IIIe/IV |
|
| |
Warranty |
|
One (1) Year from date of purchase. Batteries
and accessories are warranted 90 days from date
of purchase |
|
| |
PC software |
|
Requirements: Microsoft Windows® XP or Vista,
512MB RAM, 500MB hard disk + 1GB for every 1,500
Category 6 tests
|
|
| |
Contents: |
| |
LanTEKII display and remote
handset, two smart lithium ion batteries, two
110-240V power adapters with us/EU/UK plugs,
lockable semi-rigid carrying case, Cat6A F/FTP patch
cords, USB cable , DataCENTER data management and
reporting software, two headsets, hanging straps,
and etl accuracy certificate.
|
| |
Links: |
| |
FiberTEK FDX Fiber Optic
Adapter Kits |
|
|
|
| Ideal 33-991 LanTEK
II-350: TIA/EIA Cat6, ISO Class E certifier with Cat6 Adapters |
$6415.00 |
[Add to Cart] |
| Ideal 33-992 LanTEK
II-500: TIA.EIA Cat6a, ISO Class E^Certifier with Cat6a Adapters |
$6910.00 |
[Add to Cart] |
| Ideal 33-993 LanTEK
II-1000: TIA/CIA Cat7A, ISO Class F/F^Certifier with Cat6A Adapters |
$7895.00 |
[Add to Cart] |
|
Accessories |
| Ideal LANTEK10GBKIT
LanTEK Alien Crosstalk kit adds alien
crosstalk testing capability to the LanTEK II-500 and LanTEK II-1000 for
testing of category 6A cabling to support 10 gigabit Ethernet. |
$1995.00 |
[Add to Cart] |
| Ideal 33-990-BP01
Lithium Ion Battery for LanTEK II |
$199.00 |
[Add to Cart] |
| Ideal 0012-00-0656
Category 6A/Class Ea Universal
channel/Permanent Link Adapter for testing of UTP and STP links up to
Category 6A/ISO Class Ea. |
$133.13 |
[Add to Cart] |
| Ideal 0012-00-0629
Category 6/Class E Universal
Channel/Permanent Link Adapter for testing of UTP and STP links up to
Category 6/ISO Class E. |
$90.63 |
[Add to Cart] |
| Ideal 6011-50-0001
Replacement Category 6A F/FTP Patch Cord |
$40.25 |
[Add to Cart] |
| Ideal 33-990-PS01
Replacement Power Supply with universal wall
plugs for US/EU/UK. 110-124VAC input, 12VDC output |
$34.95 |
[Add to Cart] |
| Ideal 33-990-TS01
Replacement Talk Set for LanTEK I/II Pair |
$25.00 |
[Add to Cart] |
| Ideal 33-990-DC01
USB Cable Mini USB Device to standard USB
boot |
$22.00 |
[Add to Cart] |
| Ideal 33-990-CC01
Large Carrying Case for LanTEK adapters.
Accommodates up to 8 adapters with room for patch cords and other
accessories |
$130.00 |
[Add to Cart] |
| Ideal 33-990-CC02
Small Carrying Case for LanTEK adapters. Accommodates up to 8 adapters with
TERA connectors and two TERA patch cords. |
$89.00 |
[Add to Cart] |
| Ideal 1019-00-1100
CAT7/ISO-F NEXANS GG-45 Testing Kit includes permanent/channel link adapters
with TERA connectors and two TERA patch cords. |
$810.00 |
[Add to Cart] |
| Ideal 1019-00-1105
CAT7/ISO-F TERA Testing Kit includes
permanent/channel link adapters with TERA connectors and two TERA patch
cords |
$375.00 |
[Add to Cart] |
|
Ideal 1019-00-0343 Coax Testing adapter kit for ANSI/SCTE 74 2003 cable TV drops
up to 100 or 300 feet (BNC Connector) |
$525.00 |
[Add to Cart] |
|
|
|
|
|
|
|
|
|
|
|
Hot Products & Promotions |
|
|
|
|
|
|
|
|
|
This Months Special: |
 |
|
|
|
|
|
Featured Product
Line: |
 |
|
|
|
|
|
|
|
|
SHOPPING CART
