 |
Telecom Long Nose Pliers
|
Click for larger image
|
Product
Overview
Long nose have side cutting
blades, a crushing slot, one .030" stripping hole, and a thin knurled nose
to facilitate handling of the wire at the terminals.
The comfortable handles are yellow plastic dipped. 6 7/8" long. Also
known as KS21257L1.
|
Combo Crimper Long Nose Pliers |
Click for larger image
|
Five tools in one,
combines crimper for UR/UY/UG, AMP tel splice
connectors, 709 series connectors, crimping "B" type
connectors and a long nose pliers.
With a crusher, cutter, 0.30" stripping hole, and yellow
plastic handle 6 7/8" long |
| Jonard JIC-22148
Combo Crimper Long Nose Pliers |
$16.60 |
[Add to Cart] |
Long Nose G Pliers |
Click for larger image
|
This plier is
designed with a long nose to close 700, 701, & 702 style
connectors. Knurled jaws to facilitate gripping wire,
red plastic handle 6 5/8" long. Also known as LONGNOSEG. |
Flush Cut Pliers |
Click for larger image
|
A close cutting plier
used to trim conductors from the 710 connector modules
without leaving exposed conductors. Ideal for close
trimming of gates and sprue on injection molded plastic
parts. Jaw design aids in use in confined areas.
Turquoise color handle, plier is 4 1/2" long |
Heat Coil Pliers |
Click for larger image
|
Designed for
installing and extracting heat coils, fuses and other
cylindrical shaped components. The thin nosed jaw allows
easy access to tight restricted areas. Yellow plastic
handle, 5 1/8" long. |
Slip Joint Side Cut Pliers |
Click for larger image
|
For heavy-duty use.
Polished head, black handles and flush bolt. Machined
gripping teeth and 3/8" hardened wire cutter. 7 3/8"
long. |
Curved Long Nose Plier |
Click for larger image
|
Nose is bent 70° for
maximum visibility. Used in confined areas. Design
includes knurled jaws for sure wrapping and looping.
Comfortable ergonomic handles. Length 6 3/8" with yellow
plastic handle. |
Curved Needle Nose Plier |
Click for larger image
|
Nose is bent 60° for
maximum visibility. Used in confined areas for bending
and forming fire wire. Inside jaw and jaw edges are
polished to prevent nicking the wire. Plier has a spring
loaded ergonomic design. Length 5 1/2" with a dark blue
plastic handle. |
Pump Pliers |
Click for larger image
|
Manufactured with a
secure tongue and groove design for a non-slip grip
(even under heavy pressure).
The jaws provide a wide range of openings with a smooth,
positive interlock between halves. Handles are plastic
coated, but are not insulated and do not protect against
electric shock. |
Telecom Diagonal
|
Click for larger image
|
Product Overview Tapered
nose diagonal cutting pliers with standard bevel knives with .030" and .045"
skinning holes, with crusher used for multi-purpose wire work, with two
V-shaped stripping notches.
The comfortable handles are red plastic dipped. 6 1/2" long. Also known
as DIAGD6 or ask for the DIAGE6 which is identical to DIAGD6 but has an
aluminum oxide insulating coating on the outside nose surface.
|
Next Page
|
SHOPPING CART
)
)
)
)
)
)
)
)
)
)
