Panduit Opticam Termination Kit
Click for Larger Image |
Tools, consumables, installation instructions and
stripping templates necessary for termination of all PANDUIT OptiCam
Pre-Polished Cam Connectors.
| |
Panduit Opticam Termination
kit Includes |
| - |
(1) FKITCASE
Case for fiber termination kits |
| - |
(1) CST115 Fiber cable jacket
stripper |
| - |
(1) FALC
Alcohol bottle (empty) |
| - |
(1) FBFSP Fiber buffer stripper |
| - |
(1) FSCDVR
Screwdriver |
| - |
(1) FGLS Safety glasses |
| - |
(1) FTWZER
Tweezers |
| - |
(1) FWBTL Water bottle (empty) |
| - |
(1) FKS Fiber
Kevlar shears |
| - |
(1) FWRKMAT Fiber safe workmat |
| - |
(1) FJQCVR
Fiber cleaver tool |
| - |
(1) OCTT OptiCam Termination
Tool (includes batteries, pouch and 2 cradles for each OptiCam
Connector - LC, SC and ST) |
| - |
(1)
FVFLPC-2.5SMY Patch cord for all OptiCam 2.5mm ferrule connectors
(SC and ST) |
| - |
(1) FVFLPC-1.25SMY Patch cord
for all OptiCam 1.25mm ferrule connectors (LC) |
| - |
(1 set)
Installation instructions and stripping templates for LC, SC and ST
OptiCam Connectors |
| |
|
| |
Cleaning
Consumables: |
| - |
(100) FWP-C Lint free wipes |
| - |
(100) FSWB-C
Cleaning swabs |
| - |
(1 pkg.) FSTY Safety stickers
for fiber scraps |
| - |
(1) PFX-0
Permanent marking pen, fine tip, black ink |
|
Panduit OptiCam Termination Tool
Click for larger image |
- For PANDUIT OptiCam™ and Opti-Crimp Pre-Polished Connector termination
- No adhesive or electricity required for termination
- Visual fault locator integrated into OptiCam™ Termination Tool (OCTT)
to simplify tooling and termination
- OptiCam™ Termination Tool (OCTT) can be used for visual
verification of optimal continuity between the field fiber and the
pre-polished fiber stub during Opti-Crimp termination with longer
patch cord (FVFLPC); FCRP5 tool must be used for mechanical crimp
termination
Modular kits are available if other or previous termination kits or tools
are already available
[OCTT Instructions]
|
Panduit fiber connectors
OptiCam® Fiber Optic Connectors –
Pre-Polished Cam Termination
|
| - |
TIA/EIA-604 FOCIS-10 compatible connectors |
| - |
Exceed TIA/EIA-568-B.3 requirements |
| - |
Insertion loss: 0.10dB average (multimode and
singlemode) |
| - |
Return loss: >20dB (multimode), >40dB
(singlemode) |
| - |
Non-optical disconnect maintains data
transmission under tensile loads for jacketed cable |
| - |
Each simplex connector includes the
following: one connector body/ferrule assembly, one crimp sleeve,
one dust cap, and depending on the part number ordered, one boot for
900μ m buffered fiber and one boot for 1.6mm– 2.0mm jacketed cable
or one boot for 3.0mm jacketed cable |
| - |
Each duplex connector includes two connector
body/ferrule assemblies, two crimp sleeves, two dust caps, one
duplex clip, and depending on the part number ordered, two boots for
1.6mm - 2.0mm jacketed cable, two boot for 3.0mm jacketed cable, or
two boots for 900μ m buffered fiber |
| - |
LC duplex clip available separately for
duplexing two simplex Panduit LC Connectors |
| - |
Fiber cable type: tight-buffered recommended |
| - |
Fiber cable size: accept 1.6mm – 2.0mm or
3.0mm jacketed cable, 900μm buffered fiber (noted in part
description) |
| - |
For 250μm coated fiber termination, use 250
micron fiber build-up tube kit or fan-out kits |
| - |
Ferrule type: 1.25mm zirconia ceramic
(highest durability for repeated matings) |
| - |
Field polish termination – Panduit recommends
anaerobic adhesive |
| - |
Use field polish termination kit (FIELDKIT) |
|
| Panduit FLCSMCXAQY LC 10Gig™ 50/125μm OM3/OM4 Multimode Simplex Fiber Optic Connector for 900μm
tight-buffered fiber installation. |
$16.50 |
[Add to Cart] |
| Panduit FLCDMCXAQY LC 10Gig™ 50/125μm OM3/OM4 Multimode Duplex Fiber Optic Connector for 900μm
tight-buffered fiber installation. |
$54.55 |
[Add to Cart] |
| Panduit FLCSMC5BLY LC 50/125μm Multimode Simplex Fiber Optic Connector for 900μm tight-buffered
fiber installation. |
$14.35 |
[Add to Cart] |
| Panduit FLCDMCSBLY LC 50/125μm Multimode Duplex Fiber
Optic Connector for 900μm tight-buffered fiber installation. |
$30.05 |
[Add to Cart] |
| Panduit FLCSMC6EIY LC 62.5/125μm Multimode Simplex Fiber Optic Connector for 900μm
tight-buffered fiber installation. |
$14.35 |
[Add to Cart] |
| Panduit FLCDMC6EIY LC 62.5/125μm Multimode Duplex Fiber Optic Connector for 900μm
tight-buffered fiber installation. |
$30.05 |
[Add to Cart] |
| Panduit FLCSSCBUY LC SM Simplex Fiber Optic Connector for 900μm tight-buffered fiber
installation. |
$13.45 |
[Add to Cart] |
| Panduit FLCDSCBUY LC SM Duplex Fiber Optic Connector for 900μm tight-buffered fiber
installation. |
$31.95 |
[Add to Cart] |
Panduit Opticam SC Connectors
|
| - |
TIA/EIA-604 FOCIS-3 compliant connectors |
| - |
Exceed TIA/EIA-568-B.3 requirements |
| - |
Insertion loss: .3dB average (multimode), .5dB average (singlemode) |
| - |
Return loss: >20dB (multimode), >26dB (10Gig™ multimode), >50dB (singlemode) |
| - |
Quick installation, greater than 50% faster, with high performance and
yield |
| - |
Cam termination design allows up to two field fiber re-terminations |
| - |
Factory pre-polished fiber endface simplifies termination over field
polish connectors |
| - |
No consumable materials required; user friendly |
| - |
Non-optical disconnect maintains data transmission under tensile loads for
jacketed cable |
| - |
Mechanical crimp cable retention consistently provides higher than
industry standard cable retention |
| - |
Cam activated fiber and buffer clamp mechanisms provide superior fiber and
buffer retention |
| - |
No separate clamps, tools or steps are required to secure both the fiber
and the buffer |
| - |
Fiber cable type: tight-buffered only
|
| - |
Fiber cable size: 900μm tight-buffered fiber with included boot(s) |
| - |
Ferrule type: 2.5mm zirconia ceramic (highest durability for repeated
matings) |
|
|
)
)
