|
|
 |
Order By Phone 1-800-543-4333 |
| |
|
In stock products will ship
the same day if your order is placed by 4pm EST Mon-Fri.
 |
|
Double Banana Plug with Wire Guide, Stackable, Solderless
 |
Set screws secure wire. Simplifies cable
construction or component mounting. Accepts cables to 0.22in
(5.59mm) dia. max., (18-22 AWG wire)
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; finish: nickel plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltage exceed 33 Vrms / 70 Vdc maximum
voltage for hands free use: 500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) (model 4898, 302°F (150°C) max). |
|
| Pomona MDP Double
Banana Plug with Nickel Plating, ABC Insulation, Wire Guide, Stackable,
Solderless (Available in Black, Brown, Red, Orange, Yellow, Green, Blue,
Violet, Gray, and White) Choose color at checkout |
$2.40 |
[Add to Cart] |
|
Pomona
4892
Double Banana Plug with Gold Plating, ABC Insulation, Wire Guide, Stackable,
Solderless (Available in Black and Red) Choose color at checkout |
$4.70 |
[Add to Cart] |
|
Pomona
4898
Double Banana Plug with Nickel Plating, Polyphenylene Sulfide Insulation,
Wire Guide, Stackable, Solderless (Available in Black and Blue) Choose color
at checkout |
$2.68 |
[Add to Cart] |
|
Pomona
4914
Set Screws 8-32 x 0.210in 100 pack |
$14.25 |
[Add to Cart] |
|
Double Banana Plug with Shorting Bar
 |
Banana Plugs internally shorted with #18 AWG wire. X-hole
accepts standard banana plug.
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation: ABS
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 VMS /70 Vdc. Maximum
voltage for hands free use. 5000 Vdc. Do not use on circuit
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max.
|
|
| Pomona MDP-S
Double Banana Plug with Shorting Bar
(Available in Black, Red, and White) Choose color at checkout |
$3.80 |
[Add to Cart] |
|
Double Banana Plug with Solder Turret Terminals
|
|
Similar to MDP except with bright tin plated solder turrets.
Accepts cables to 0.215in dia. max
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation :
polypropylene
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuit
where transient stresses can exceed the rated voltage. 15A,
131°F (55°) max.
|
|
| Pomona MDP-ST
Double Banana Plug with Solder Turret
Terminals |
$3.35 |
[Add to Cart] |
|
Double Banana Plug, Stackable Solderless
 |
Similar to MDP without cable loop.
Features recess for mounting small components with set
screws.
Model 1330 has set screws like MDP.
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation: ABS
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms/ 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuit
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max/
|
|
| Pomona 1330 Double
Banana Plug, Stackable, Solderless |
$2.60 |
[Add to Cart] |
|
Double Banana Plug with Solder Turret Terminals
 |
Similar to Model 1330, but features bright tin plated solder
turrets
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation:
polypropylene.
Rating: For CE Compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms/ 70Vdc. Maximum
voltages for hands free use: 5000 Vdc. Do not use on
circuits where transient stresses can exceed the rated
voltage. 15A, 122°F (50°C) max.
|
|
| Pomona 1330-ST
Double Banana Plug with Solder Turret Terminals |
$3.35 |
[Add to Cart] |
|
Isolated Double Banana Plug with Four Solder Terminals
 |
Use to make your own attenuator, balun, or filter
Jack are isolated from plugs.
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium, copper; Finish: nickel plating; Insulation:
Polypropylene; Solder turrets: bright tin plated
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages for hands free use: 2500 Vdc. Do
not use on Circuits where transient stresses can exceed the
rated voltage. 15A, 131°F (55°C) max.
|
|
| Pomona MDP-X
Isolated Double Banana Plug with Four Solder Terminals |
$10.75 |
[Add to Cart] |
|
Isolated Double Banana Plug with Three Solder Terminals
 |
Use to make your own attenuator balun or filter.
One jack is isolated
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation:
polypropylene; Solder Turrets; Bright tin plated
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltages for hands free use: 2500 Vdc. Do no use on circuits
where transient stresses can exceed the rated voltage. 15A,
131°F (55°C) max.
|
|
| Pomona 1837 Isolated
Double Banana Plug with Three Solder Terminals |
$12.18 |
[Add to Cart] |
|
4mm Safety Banana Jack to Banana Plug Adapter
 |
Accepts safety-sheathed 4mm banana plug and adapts to
standard banana plugs.
Material: nickel plated brass
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 7o Vdc, -10 to
55°C
|
|
| Pomona 6728 4mm
Safety Banana Jack to Banana plug Adapter (Available in Red or Black) Choose
color at checkout |
$3.15 |
[Add to Cart] |
|
Double Banana Plug Splice
 |
Provides rapid method for splicing cables.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltages for hands free use: 5000 Vdc. Do not use on
circuits where transient stresses can exceed the rated
voltage. 15A, 131°F (55°C) max.
|
|
| Pomona 1823 Double
Banana Plug Splice (Available in Black or Red) Choose color at checkout |
$3.15 |
[Add to Cart] |
|
Isolated Single Banana Plug with Two Solder Terminals
 |
Ideal for computers, lab circuit design and testing.
Jack is isolated from plug
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation:
polypropylene; Solder turrets; bright tin plated.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Do not
use on circuits where transient stresses can exceed the
rated voltage. 15A, 131°F (55°C) max.
|
|
| Pomona 1390
Isolated Single Banana Plug with Two Solder
Terminals (Available in Black or Red) Choose color at checkout |
$6.05 |
[Add to Cart] |
|
Single Banana Plug Splice
 |
Provides rapid method for splicing single banana plug patch
cords
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage/ 15,
55°C (131°F) max.
|
|
| Pomona 1829 Single
Banana Plug Splice (Available in Black or Red) Choose color at checkout |
$14.30 |
[Add to Cart] |
|
QUAD Stacking Plug
 |
Features on-in-line stacking and three cross-stacking
connections.
All jacks are connected to plug.
Material: Banana Plug/Jack; brass: Spring: heat treated
beryllium copper; Finish: nickel plating: insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max.
|
|
| Pomona 3364 QUAD
Stacking Plug (Available in Black or Red) Choose color at checkout |
$10.50 |
[Add to Cart] |
|
Triple Banana Plug, Stackable, Solderless
 |
Use for balanced line 2 conductor shielded cable assemblies.
Accepts cable to 0.25in dia max., Setscrews secure wires.
Material: banana Plug/Jack: brass; Spring: heat treated
beryllium copper; Finish: nickel plating; Insulation: ABS
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max.
|
|
| Pomona 2970 Triple
Banana Plug, Stackable, Solderless (Available in Black or Red) Choose color
at checkout |
$4.75 |
[Add to Cart] |
|
Do-It-Yourself Solderless Stackup Banana Plug with Safety
Shield
 |
Internal set screw holds wire firmly.
Safety collar insulates exposed wire leads.
Accepts standard banana plug and fits 0.166in (4.22mm) dia.
banana jack.
Material: Banana Plug/Jack; brass; Spring: heat treated
beryllium copper.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms/ 70 Vdc. Maximum
voltage for hands free user: 5000 Vdc. Do not use on
circuits where transient stresses can exceed the rated
voltage. 15A, 122°F (50°C) max. (Model 4899, 302°F (150°C)
max.).
Accepts 18-22 AWG wire.
|
|
| Pomona 1825
Do-It-Yourself Nickel Plated, ABS Insulation, Solderless Stackup
Banana Plug with Safety Shield Sold in packs of 10 (Available in black,
Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White) Choose color
at checkout |
$13.70 |
[Add to Cart] |
|
Pomona
4897
Do-It-Yourself
Gold Plated, ABS Insulation, Solderless Stackup Banana Plug with Safety
Shield (Available in Black or Red) Choose color at checkout |
$2.78 |
[Add to Cart] |
|
Pomona
4899
Do-It-Yourself Nickel Plated, Polyphenylene Sulfide Insulation,
Solderless Stackup Banana Plug with Safety Shield Sold in packs of 10
(Available in Black or Blue) Choose color at checkout |
$17.95 |
[Add to Cart] |
|
Pomona
6545
Do-It-Yourself Nickel Plated, ABS Insulation, Solderless Stackup
Banana Plug with Safety Shield. Package of 1 each of all 10 colors |
$13.70 |
[Add to Cart] |
|
Do-It-Yourself Solderless Stackup Banana Plug
 |
4914 set screws 8-32 x 0.210 (5.33mm), 100/pk.
Internal set screw holds wire firmly.
Accepts standard banana plug, fits standard 0.166in (4.22mm)
dia. banana jack
Material: Banana Plug/Jack: brass; Spring: heat treated
beryllium copper.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max. (Model 5230, 302°F (150°C) max.).
Accepts 18-22 AWG wire.
|
|
| Pomona 1325
Do-It-Yourself Nickel Plated, ABS Insulation,
Solderless Stackup Banana Plug (Available in Black, Brown, Red, Orange,
Yellow, Green, Blue, Violet, Gray, and White) Choose color at checkout |
$13.70 |
[Add to Cart] |
|
Pomona
5406
Do-It-Yourself Gold Plated, ABS Insulation, Solderless Stackup Banana Plug
(Available in Black or Red) Choose color at checkout |
$2.78 |
[Add to Cart] |
|
Pomona
5230
Do-It-Yourself Nickel Plated, Polyphenylene Sulfide Insulation, Solderless
Stackup Banana Plug (Available in Black or Blue) Choose color at checkout |
$17.30 |
[Add to Cart] |
|
Pomona
6546
Do-It-Yourself Nickel Plated, ABS Insulation, Solderless Stackup Banana
Plug. Package of 1 each of all 10 colors |
$13.70 |
[Add to Cart] |
|
Do-It-Yourself Retractable Sheath Banana Plug
 |
Do-It-Yourself Retractable Sheath Banana Plugs provide fast
simple assembly and reliable performance.
Rating: For CE CAT II 300V, CAT III 150V. Maximum voltage
for hands free use. 1000 Vrms, 20A ≤ 2 mΩ
Accepts 18-22 AWG wire.
|
|
| Pomona 122505A
Do-it-Yourself Retractable Sheath Banana Plug - Black |
$4.05 |
[Add to Cart] |
|
Pomona 122506A
Do-it-Yourself Retractable Sheath Banana Plug
- Red |
$4.05 |
[Add to Cart] |
|
Do-It-Yourself Retractable Sheath Banana Plug/ Banana Jack
 |
These plugs and jacks are designed to fit together and
provide protection from accidental shorting.
Material: Banana Plug/Jack: brass; Spring: beryllium copper;
Insulation: nylon
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc.
Maximum voltage for hands free use: 1200V ac/dc. Do not use
on circuit where transient stresses can exceed the rated
voltage. 15A, 176°F (80°C) max.
|
|
| Pomona 4933
Do-It-Yourself In-Line Sheathed Banana Plug (Accepts Wire AWG: 22, 20, 18:
Wire Access Hole 0.159in) |
$3.35 |
[Add to Cart] |
|
Pomona 4986
Do-It-Yourself In-Line Sheathed Banana Plug (Accepts Wire AWG: 16, 14: Wire
Access Hole 0.200in) |
$3.35 |
[Add to Cart] |
|
Pomona 4934
Do-It-Yourself In-Line Sheathed Banana Jack
(Accepts Wire AWG: 22, 20, 18: Wire Access Hole 0.159in) |
$3.35 |
[Add to Cart] |
|
Rivet Type Banana Plug
 |
Excellent for riveting to panels or boards.
Fits standard 0.166in (4.22mm) dia. banana jack.
Material: Banana Plug Body: brass; Spring: beryllium copper;
Finish: nickel plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A
Sold in packages of 10
|
|
| Pomona 3257
Rivet Type Banana Plug (X = 0.094", Panel =
0.062in) |
$13.75 |
[Add to Cart] |
|
Pomona
3258
Rivet Type Banana Plug (X = 0.125", Panel = 0.093in) |
$13.75 |
[Add to Cart] |
|
Banana Plug with Screw and Soldering Lug
 |
Fits standard 0.166in (4.22mm) dia. banana jack
Material: banana Plug Body: brass; Spring: Beryllium copper;
Finish: nickel plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hand free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A
Sold unassembled, in pkgs. of 10
|
|
| Pomona 3265
Banana Plug with Screw and Soldering Lug
(Thread: 6-32 x 0.25in) |
$19.00 |
[Add to Cart] |
|
Pomona 3266
Banana Plug with Screw and Soldering Lug (Thread: 8-32 x 0.25in) |
$19.00 |
[Add to Cart] |
|
Rivet Type Banana Plug with Turret
 |
Excellent for riveting to panels or boards. Solder turret
for rapid attachment of wires.
Fits standard 0.166in dia banana jack.
Material: Banana Plug Body: brass; Spring: Beryllium copper;
Finish: nickel plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A.
Sold in packages of 10
|
|
| Pomona 3261 Rivet
Type Banana Plug with Turret |
$13.75 |
[Add to Cart] |
|
4mm Banana Plug with Threaded M3 Stud
 |
4mm plug with threaded M3 stud, 2 nuts; 12mm (0.5in) stud
length.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 36A
|
|
| Pomona 72918 4mm
Banana Plug with Threaded M3 Stud |
$8.85 |
[Add to Cart] |
|
Banana Plug with Threaded Stud and Solder Lug
 |
Fits standard 0.166in dia banana jack.
Material: Banana Plug Body: brass; Spring: beryllium copper;
Finish: Nickel plating.
Rating: For CE Compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage of hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A
Sold unassembled, In packages of 10.
|
|
| Pomona 3263
Banana Plug with Threaded Stud and Solder Lug
(Thread 6-32 x 0.50in) |
$15.80 |
[Add to Cart] |
|
Pomona
3264
Banana Plug with Threaded Stud and Solder Lug (Thread 8-32 x 0.50in) |
$15.80 |
[Add to Cart] |
|
Pomona
4512
Banana Plug with Threaded Stud and Solder Lug (Thread 8-32 x 0.63in) |
$19.00 |
[Add to Cart] |
|
Panel Mount IEC61010 Banana Jack for Sheathed Plugs
 |
Material: Gold-plated nickel (72912 and 72913)
Rating: 1000V CAT III, 36A Max.
Sold in packages of 10 per color
|
|
| Pomona 72912-0 Panel
Mount IEC61010 Banana Jacks for Sheathed Plugs - Black Threaded Stud |
$25.75 |
[Add to Cart] |
|
Pomona
72912-2
Panel Mount IEC61010 Banana Jacks for Sheathed Plugs - Red Threaded Stud |
$25.75 |
[Add to Cart] |
|
Pomona
72913-0
Panel Mount IEC61010 Banana Jacks for Sheathed Plugs - Black Solder Tab |
$22.10 |
[Add to Cart] |
|
Pomona
72913-2
Panel Mount IEC61010 Banana Jacks for Sheathed Plugs - Red Solder Tab |
$22.10 |
[Add to Cart] |
|
Pomona
72930
Panel Mount IEC61010 Banana Jacks for Sheathed Plugs - Threaded Stud
Hexagonal Nut (Available in Black, Brown, Red, Yellow, Green, Blue, Violet,
Gray, and White) Choose color at checkout |
$17.50 |
[Add to Cart] |
|
Panel Mount IEC61010 4mm Banana Jack for Sheathed Plug
 |
Accepts flexible test lead sets 5907A, 5908A, and 5909A.
Max. Panel Thickness: 0.28in
Insulation: Nylon
Rating: 1000V CAT III per IEC61010-031 and IEC61010-1 25A
Sold in packages of 10 per color
|
|
| Pomona 5931
Panel Mount IEC61010 4mm Banana Jack for
Sheathed Plugs (Available in Black, Red, Blue, and White) Choose color at
checkout |
$20.50 |
[Add to Cart] |
|
Insulated Banana Plug and Jack with Flexible Boot, Solder or
Crimp
 |
Ideal for making patch cords or field repairs. Snap-on
flexible PVC boot allows wire to be crimped or soldered to
banana plug or jack
Fits standard 0.166in dia. banana jack.
Material: Boot: banana Plug body: brass; Spring: beryllium
copper; Finish: nickel plating; Jack: nickel plated brass
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A
122°F (50°C) max.
|
|
| Pomona 5169
Insulated Banana Plug Flexible Boot, Solder or Crimp (Accepts wire AWG: 22,
20, 18: Mates with Jack 5167) |
$2.25 |
[Add to Cart] |
|
Pomona
5170
Insulated Banana Plug Flexible Boot, Solder or Crimp (Accepts wire AWG: 16,
14: Mates with Jack 5168) |
$2.25 |
[Add to Cart] |
|
Pomona
5167
Insulated Banana Jack Flexible Boot, Solder or Crimp (Accepts wire AWG: 22,
20, 18: Mates with Jack 5169) |
$12.30 |
[Add to Cart] |
|
Pomona
5168
Insulated Banana Jack Flexible Boot, Solder or Crimp (Accepts wire AWG: 16,
14: Mates with Jack 5170) |
$2.25 |
[Add to Cart] |
|
Panel Mount Banana Jacks with Mounting Base
 |
Mounts in panels from 0.063in (1.60mm) to 0.375in (9.53mm)
thick. One black, one red. Triple has green.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltage for hands free use: 2500 Vdc. Do
not use on circuits where transient stresses can exceed the
rated voltage. 15A.
Temp: 239°F (115°C) [5233-0, 220°F (428°C)]
|
|
| Pomona 2269
Panel Mount Banana Jacks with Mounting Base -
Double |
$2.80 |
[Add to Cart] |
|
Pomona
5233
Panel Mount Banana Jacks with Mounting Base - Double
High-Temp |
$4.20 |
[Add to Cart] |
|
Pomona
4601
Panel Mount Banana Jacks with Mounting Base - Triple |
$4.75 |
[Add to Cart] |
|
Panel Mount Banana Jacks with Mounting Base
 |
These banana jacks fit most DMM plugs and all sheathed
Pomona plugs. Available with several different terminals.
Threaded and press-in style.
Rating: Designed to meet IEC61010 CAT III 1000 Vrms,. 15A
Sold in packages of 10.
Comes with Hex Nit and Lock Washer
|
|
| Pomona 6387-ST-T
Panel Mount Banana Jacks for Sheathed Plugs
(Available in black or red) Choose color at checkout |
$20.65 |
[Add to Cart] |
|
Uninsulated Banana Jack
 |
Fine standard banana plug.
Material: Nickel-plated brass
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use. 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A.
|
|
|
Terminal Strip Adapter 4mm Safety Banana Jack to 6/32
 |
Easily connect your DMM safety sheathed test leads to
terminal strips via this hands 6/32 thread adapter.
Material: Contacts: nickel-plated brass, Insulation: Lucel
acetal polymer.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. (14 to
212°F) -10 to 100°C
|
|
| Pomona 6720
Terminal Strip Adapter, 4mm Safety Banana
Jack to 6/32 |
$3.55 |
[Add to Cart] |
|
Banana Jack with Wire Wrap Terminal
 |
Material: Jack; nickel-plated brass; Terminal: gold-plated
phosphor bronze; Insulation: polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage: 3A,
239°F (115°C) max.
Sold in packages of 10 per color.
|
|
| Pomona 4005 Banana
Jack with Wire Wrap Terminal (Available in Black or Red) Choose color at
checkout |
$31.75 |
[Add to Cart] |
|
Terminal Strip Banana Jack Adapter
 |
This adapter provides a banana jack connection by replacing
the screw in a terminal strip. Secure connections can be
made with standard banana plug patch cords without breaking
the connection to the terminal strip. Banana jack 0.166in
dia.
Material: Banana Jack: nickel-plated brass; insulation:
Nylon.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use. Do not use on circuit where
transient stresses can exceed the rated voltage. 25A, 216°F
(102°C) max
Colors: Black, Red, Orange, Yellow, and White
|
|
| Pomona 5699 Terminal
Strip Banana Jack Adapter (Thread: 6-32, Vrms: 1100, Torque in/Lb: 7,
Stud Length: 0.25in) (choose color at checkout) |
$3.45 |
[Add to Cart] |
|
Pomona 5700
Terminal Strip Banana Jack Adapter (Thread: 8-32, Vrms: 1600, Torque
in/Lb: 16, Stud Length: 0.32in)
(choose color at checkout) |
$3.45 |
[Add to Cart] |
|
Pomona 5701
Terminal Strip Banana Jack Adapter (Thread: 10-32, Vrms: 1700, Torque
in/Lb: 25, Stud Length: 0.32in)
(choose color at checkout) |
$3.45 |
[Add to Cart] |
|
Panel Mount Banana Jack
 |
Mounts in panels ranging in thickness from 0.063in (1.60mm)
to 0.375in (9.53mm).
Material: brass
Rating: For CE compliance and for personal safety, do not
hold in hands when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
239°F (115°C) max. (Model 4900, 428°F (220°C max).
Sold in packages of 10 per color
|
|
| Pomona 1581 Panel
Mount Banana Jack (Plating: Bright Tin, Polycarbonate Insulation) (Available
in Black, Brown, Red, Orange, Yellow, Green. Blue, Violet, Gray, and White)
Choose color at checkout |
$12.70 |
[Add to Cart] |
|
Pomona 2854
Panel Mount Banana Jack (Plating: Gold, Polycarbonate Insulation) (Available
in Black, Brown, Red, Yellow, Green. Blue, Gray, and White) Choose color at
checkout |
$20.00 |
[Add to Cart] |
|
Pomona 4900
Panel Mount Banana Jack (Plating: Bright Tin,
Polycarbonate Sulfide Insulation) (Available in Black and Blue) Choose color
at checkout |
$14.70 |
[Add to Cart] |
|
Binding Posts
 |
Insulation: Polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
239°F (115°C) max.
Sold unassembled
Colors available: 3750 and 3760 Black, Brown, Red, Orange,
Yellow, Green, Blue, Violet, Gray, and White. 3770 Black and
Red.
|
|
| Pomona 3750
Gold-plated Brass Binding Post (Choose color at checkout) |
$3.90 |
[Add to Cart] |
|
Pomona 3760
Bright Tin-Plated Brass Binding Post (Choose
color at checkout) |
$2.70 |
[Add to Cart] |
|
Pomona 3770
Gold-plated Tellurium Copper Binding Post (Choose color at checkout) |
$6.90 |
[Add to Cart] |
|
Hex Head Binding Posts
|
|
Meets MIL-P-55149/1A
Material: Binding Post Body, Nuts, Lockwasher: gold-plated
brass; Insulation: Nylon MIL-P-20693
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc.
Maximum voltage for hands free use: 1500 Vrms. Do not use on
circuits where transient stresses can exceed the rated
voltage. 30A, 176°F (80°C) max.
Colors Available: Black, Red, Yellow, Green. Blue, and White
|
|
| Pomona 5018
Hex Head Binding Post (Choose color at
checkout) |
$8.60 |
[Add to Cart] |
|
Binding Post with Double Mounting
 |
Accepts standard banana plugs and 0.080in (2.03mm) pin tips,
wires and probe tips in 0.10in cross-hole
Material: Binding Post: bright tin-plated brass; Insulation:
polycarbonate.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
239°F (115°C) max.
Mtg. Base Colors: Black and Red
|
|
| Pomona 4243 Binding
Post with Double Mounting (Choose color at checkout) |
$5.70 |
[Add to Cart] |
|
Spring Loaded Binding Post
 |
Meets MIL-P-55149/8
Silicone rubber O-rings provide water resistant seal when
mounted in panels from 0.062in to 0.125in (15.75 to 3.18mm)
thick.
Material: Nickel-plated brass.
Colors Available: Black and Red
|
|
| Pomona 4995
Spring Loaded Binding Post (Choose Color at
Checkout) |
$17.95 |
[Add to Cart] |
|
Dual Binding Posts
 |
5-way binding post with 3.91mm (0.154in) cross-hole that
accepts up to 12 AWG wire and standard banana plugs. Posts
are spaced at the standard 3/4 inch spacing to mate to dual
banana plugs.
Material: Binding Post: nickel-plated brass.
Insulators: nylon
Rating: 30A current.
|
|
|
Spring Loaded Binding Post
 |
Mounts in panels from 0.06in (1.6mm to 0.38in (9.53mm)
thick.
Accepts wire or plugs up to 0.08in (2.16mm) dia, with
insulation up to 0.16in (4.06mm)
Material: Body: tin plated brass; Insulation: Polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 630 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
239°F (115°C) max.
|
|
| Pomona 4770
Spring Loaded Binding Post (Choose color at
checkout) |
$19.00 |
[Add to Cart] |
|
Binding Post/Banana Jack Mounting Bases
 |
Mounting banana jacks and binding posts at standard 0.75in
(19.05mm) spacing.
Material: polycarbonate
Rating: 239°F (115°C) max.
Sold in packages of 10
| |
Model # |
Type |
Used with |
A |
B |
C |
|
| |
3826 |
Double |
Standard |
1.19" |
0.75" |
0.44" |
| |
3863 |
Triple |
Binding Post |
1.94" |
0.75" |
0.44" |
|
4619 |
Double |
Miniature |
0.87" |
0.50" |
0.38" |
| |
4614 |
Triple |
Banana Jacks |
1.38" |
0.50" |
0.38" |
| |
4654 |
Double |
Standard |
1.38" |
0.75" |
0.63" |
| |
4590 |
Triple |
Banana Jacks |
2.13" |
0.75" |
0.63" |
|
|
| Pomona 3862 Binding
Post/Banana Jack Mounting Base |
$6.25 |
[Add to Cart] |
|
Pomona 3863
Binding Post/Banana Jack Mounting Base |
$8.45 |
[Add to Cart] |
|
Pomona 4619
Binding Post/Banana Jack Mounting Base |
$5.28 |
[Add to Cart] |
|
Pomona 4614
Binding Post/Banana Jack Mounting Base |
$8.45 |
[Add to Cart] |
|
Pomona 4654
Binding Post/Banana Jack Mounting Base |
$5.25 |
[Add to Cart] |
|
Pomona 4590
Binding Post/Banana Jack Mounting Base |
$9.50 |
[Add to Cart] |
|
Shorting Link for Standard Binding Posts
 |
Solid shorting link for binding posts.
Material: nickel-plated brass
Rating: 15A
Fits Binding Posts on 0.750in centers
|
|
| Pomona 4115 Short Link for
Standard Binding Posts |
$23.00 |
[Add to Cart] |
|
Miniature Double Banana Plug with Set Screws, Stackable,
Solderless
 |
Internal set screws secure cable up to 0.15in (381mm) dia.
or components.
Plugs fit miniature 0.104in (2.64mm) dia jacks.
Material: Banana Plug/Jack: brass; Spring: beryllium copper;
Finish: Gold Plating; Insulation: ABS
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage: 5A
122°F (50°C) max.
|
|
| Pomona 2244
Miniature Double Banana Plug with Set Screws, Stackable, Solderless |
$4.60 |
[Add to Cart] |
|
Miniature Solder Type Banana Plug
 |
Sold in packages of 10
Material: Banana Plug Body: brass; Spring: beryllium copper;
Finish: gold-plating; Insulation: nylon
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
176°F (80°C) max.
Fits miniature 0.104in (2.64mm) dia. banana jacks.
|
|
| Pomona 3690
Miniature Solder Type Banana Plug - Insulator Length 0.45in |
$18.50 |
[Add to Cart] |
|
Pomona
4617
Miniature Solder Type Banana Plug - Insulator Length 1.00in |
$3.15 |
[Add to Cart] |
|
Miniature Banana Plug with Threaded Stud
 |
Fits miniature 0.104in dia. banana jacks.
Furnished with 4-40 hex nut, 4-40 threaded stud.
Material: Banana Plug Body: brass; Spring: Beryllium copper;
Finish: gold plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A
Sold un assembled in packages of 10
|
|
| Pomona 3276
Miniature Banana Plug with Threaded Stud (screw length 0.230in) |
$12.65 |
[Add to Cart] |
|
Pomona
4513
Miniature Banana Plug with
Threaded Stud (screw length 0.480in) |
$18.40 |
[Add to Cart] |
|
Do-It-Yourself Miniature Banana Plug, Stackable, Solderless
 |
Fit miniature 0.104in dia. banana jacks.
Wire firmly held in place with internal set screw.
Material: Banana Plug/Jack: brass; Spring: beryllium copper;
Finish: gold-plating; insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max
Colors Available: Black and Red
|
|
| Pomona 2944
Do-It-Yourself Miniature Banana Plug, Stackable, Solderless (Choose color at
checkout) |
$3.55 |
[Add to Cart] |
|
Do-It-Yourself Miniature Banana Plug with Safety Shield,
Stackable Solderless
 |
Fit miniature 0.104in dia. banana jacks.
Wire firmly held in place with internal set screw.
Material: Banana Plug/Jack: brass; Spring: beryllium copper;
Finish: gold-plating; insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max
Colors Available: Black and Red
|
|
| Pomona 2945
Do-It-Yourself Miniature Banana Plug with Safety Shield, Stackable
Solderless (Choose color at checkout) |
$3.55 |
[Add to Cart] |
|
Miniature Double Banana Plug with Shorting Bar
 |
Plugs fit miniature 0.104in dia. banana jacks.
Banana plugs internally shorted with 18 AWG wire.
Material: Banana Plug/Jack: brass; Spring: beryllium copper;
Finish: gold-plating; insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Do not
use on circuits where transient stresses can exceed the
rated voltage. 5A 122°F (50°C) max.
Colors Available: Black and Red
|
|
| Pomona 2035
Miniature Double Banana Plug with Shorting Bar (Choose color at checkout) |
$5.08 |
[Add to Cart] |
|
Miniature Double Banana Plug Shorting Bar
 |
Center hole accepts 4-40 screw.
Material: Banana Plug Body: brass; Spring: beryllium copper;
Finish: gold plating
Rating: 5A. Resistance less than 1.5m.
Fits Miniature binding posts and miniature banana jacks on
0.5in (12.70mm) centers.
|
|
| Pomona 3030
Miniature Double Banana Plug Shorting Bar |
$7.00 |
[Add to Cart] |
|
Miniature Insulated Binding Post with Double Mounting Base
 |
Accepts miniature banana plugs.
8-32 hex nut and Lockwasher included
Material: Binding Post Body, Nut: brass; Lockwasher: steel;
Insulation: Polycarbonate.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use. 1500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
239°F (115°C) max.
|
|
| Pomona 2383
Miniature Insulated Binding Post with Double Mounting Base - Gold Plating |
$11.00 |
[Add to Cart] |
|
Pomona
2440
Miniature Insulated Binding Post with Double Mounting Base - Tin Plating |
$10.05 |
[Add to Cart] |
|
Miniature Rivet Type Banana Plug
 |
Fits Miniature 0.104in (2.64mm) dia. banana jacks.
Material: Banana Plug Body: brass; Spring: beryllium copper;
Finish: gold plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 VRMS / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A
Sold in packages of 10
|
|
| Pomona 3268
Miniature Rivet Type Banana Plug (panel - 0.062in, X Dimension - 0.094in) |
$11.00 |
[Add to Cart] |
|
Pomona
3271
Miniature Rivet
Type Banana Plug (panel - 0.093in, X Dimension - 0.125in) |
$11.00 |
[Add to Cart] |
|
Pomona
3272
Miniature Rivet Type Banana Plug (panel - 0.125in, X Dimension - 0.156in) |
$11.00 |
[Add to Cart] |
|
Do-It-Yourself Pin Tip Plug with Safety Shield, Stackable
Solderless
 |
Accepts miniature banana plug.
Wire firmly held in place with internal set screw.
Material: Pin Tip Plug/Jack: gold-plated brass; Insulation:
ABS.
Rating. For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 3000 Vdc. Do not use on circuit
where transient stresses can exceed the rated voltage: 5A,
122° (50°C) max
|
|
| Pomona 3548
Do-It-Yourself Pin Tip Plug with Safety Shield, Stackable, Solderless |
$3.65 |
[Add to Cart] |
|
Miniature Binding Post
 |
Accepts miniature banana plug.
8-32 hex nut and Lockwasher included.
Material: Binding Post Body, Nut: brass; Lockwasher: steel;
Insulation: Polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
239°F (115°C) max.
|
|
| Pomona 2382
Miniature Binding Post - Gold Plating |
$5.70 |
[Add to Cart] |
| Pomona 2439
Miniature Binding Post - Tin Plating |
$5.30 |
[Add to Cart] |
|
Miniature Banana Jack, Panel Mount
 |
Accepts miniature banana plugs. Mounts in panels up to
0.250in (6.35mm) thick.
Material: gold-plated brass; Insulation: polycarbonate.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on circuits
where transient stresses can exceed circuits where transient
stresses can exceed the rated voltage. 5A 239°F (115°C) max.
Sold unassembled, in packages of 10 per color
Colors Available: Black, Red, Orange, Yellow, Green, Blue,
and White
|
|
| Pomona 2142
Miniature Banana Jack, Panel Mount (Choose color at checkout) |
$12.65 |
[Add to Cart] |
|
Miniature Banana Jack with Wire Wrap Terminal
 |
Accepts miniature banana plugs.
Mounts in panels up to 0.250n (6.35mm) thick.
Material: Jack: nickel-plated brass; Terminal: gold-plated
phosphor bronze insulation: polycarbonate.
Rating: for CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 3A,
239°F (115°C) max.
Sold unassembled in packages of 10
Colors available: Black and Red
|
|
| Pomona 4022
Miniature Banana Jack with Wire Wrap Terminal (Choose color at checkout) |
$20.35 |
[Add to Cart] |
|
Miniature Rivet Type Banana Jack with Turret
 |
Accepts miniature banana plugs.
Mount in panels up to 0.062in (1.57mm) thick.
Material: Gold-plated brass
Rating: for CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A.
Sold in packages of 10
Rec. Mounting Hole: 0.140 ± 0.002 (9/64 Drill)
Panel Thickness: 0.062in (1.57mm)
|
|
| Pomona 3277
Miniature Rivet Type Banana Jack with Turret |
$8.45 |
[Add to Cart] |
|
Miniature Banana Jack in Double Mounting Base, Panel Mount
 |
Accepts miniature banana plugs. Mounts in panels up to
0.188in (4.78mm) thick.
Material: gold-plated brass; Insulation: polycarbonate.
Rating. For CE compliances and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Do not
use on circuits where transient stresses can exceed the
rated voltage. 5A, 239°F (115°C) max.
Mounting Base Colors: Black or Red
|
|
| Pomona 2143
Miniature Banana Jack in Double Mounting Base, Panel Mount (Choose color at
checkout) |
$3.45 |
[Add to Cart] |
|
Pin Tip Jacks with Double Mounting Base
|
|
Accepts 0.08in (2.03mm) dia. pin.
Max. Panel thickness 0.188in (4.78mm)
Material: Jack: gold-plated brass; Spring: beryllium copper;
Insulation: polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on
circuit where transient stresses can exceed the rated
voltage. 5A, 239°F (115°C) max.
Mounting Base Colors: Black or Red
|
|
| Pomona 4543 Pin Tip
Jacks with Double Mount Base (Choose color at checkout) |
$4.30 |
[Add to Cart] |
|
Double Pin Tip Plug with Shorting Bar
 |
Accepts pin tip plugs. Internally shorted with 20 AWG wire.
Use as connecting link for 0.50in. (12.70mm) spaced pin tip
jacks.
Material: Pin Tip Plug/Jack brass; Spring: beryllium copper:
finish: gold plating; Insulation: ABS
For CE compliance and for personal safety, do not hold in
hand when voltages exceed 33 Vrms / 70 Vdc. Maximum voltages
for hands free use: 3000 Vdc. Do not use on circuits where
transient stresses can exceed the rated voltage. 5A, 239°F
(115°C) max.
Available Colors: Black or Red
|
|
| Pomona 3452 Double
Pin Tip Plug with Shorting Bar (Choose color at checkout) |
$4.70 |
[Add to Cart] |
|
Pin Tip Jack
 |
Accepts 0.080in (2.03mm) dia pin.
Material: Jack: gold-plated brass; Spring: beryllium copper;
Insulation: polycarbonate.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 1500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
239°F (115°C) max.
Available Colors: Black, Red, Blue, or White
|
|
| Pomona 3542 Pin Tip
Jack (Choose color at checkout) |
$24.45 |
[Add to Cart] |
|
Do-It-Yourself 0.080in (20.32mm) Dia. Pin Tip Plug with
Flexible Boot, Solder or Crimp
 |
Ideal for making patch cords or field repairs. Snap-on
flexible PVC boot allows wire to be crimped or soldered to
pin tip plug.
Material: nickel-plated brass.
Accepts 18-22 AWG wire.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 3000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max.
Available Colors: in 10 colors
|
|
| Pomona 5173
Do-It-yourself 0.080in Dia. Pin Tip Plug with Flexible Boot, Solder or Crimp
(Choose color at checkout) |
$2.40 |
[Add to Cart] |
|
Insulated Pin Jack with Wire Wrap Terminal
 |
Accepts 0.080in (2.03mm) dia pin.
Max. panel thickness 0.25in (6.35mm)
Material: Jack: nickel-plated brass; Spring: gold-plated
beryllium copper. Terminal: gold-plated phosphor bronze:
Insulation: polycarbonate
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Do not
use on circuits where transient stresses can exceed the
rated voltage. 3A, 239°F 9115°C) max.
Available colors: Black, Red, Blue, or White
|
|
| Pomona 4773
Insulated Pin Jack with Wire Wrap Terminal (Choose colors at checkout) |
$2.85 |
[Add to Cart] |
|
Double Banana Jack to Miniature Double Banana Plug
 |
Converts standard banana plugs to miniature.
Material: Jack: nickel-plated brass; Spring: nickel-plated
beryllium copper; Insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max.
|
|
| Pomona 2952 Double
Banana Jack to Miniature Double Banana Plug |
$7.80 |
[Add to Cart] |
|
Miniature Banana Jack to Banana Plug
 |
Converts miniature banana plugs to standard.
Material: Jack: nickel-plated brass; Spring: nickel-plated
beryllium copper; Insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F 950°C) max.
Sold in packages of 10
Available Color: Black or Red
|
|
| Pomona 2477
Miniature Banana Jack to Banana Plug (Choose color at checkout) |
$18.45 |
[Add to Cart] |
|
Do-It-Yourself In-Line 4mm Banana Plug
 |
Wire connection by set screw. Accepts 18,20, and 22 AWG
wire.
Material: Insulation: Nylon
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 750 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage 25A.
Sold in packages of 10 per color
Available Colors: Black or Red
|
|
| Pomona 5934
Do-It-Yourself In-Line 4mm Banana Plug (Choose color at checkout) |
$10.50 |
[Add to Cart] |
|
Pin Tip Jack to Banana Plug
 |
Accepts 0.08in pin tip plug or probe tip. Fits standard
0.166in (4.22mm) dia. banana jack.
Material: gold-plated beryllium cooper.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hand free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A
122°F (50°C)
Sold in packages of 10
Available Colors: Black or Red
|
|
| Pomona 1809 Pin Tip
Jack to Banana Plug (Choose color at checkout) |
$19.15 |
[Add to Cart] |
|
Banana Jack to Pin Tip Plug
 |
Use to mate standard banana plug patch cords to equipment
having pin jacks.
Material Jack/Plug: nickel-plated brass; Insulation : ABS
Rating: For CE compliance and for personal safety, so not
hold in hand when voltages exceed 33 Vrms / 780Vdc. Maximum
voltage for hands free use: 3000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max.
Sold in packages of 10
Available Colors: Black or Red
|
|
| Pomona 1432 Banana
Jack to Pin Tip Plug (Choose color at checkout) |
$11.50 |
[Add to Cart] |
|
Banana Jack to 0.08in Dia Pin Tip Jack
 |
Adapts standard 0.166in dia. banana plug to 0.080in dia. pin
tip plug.
Material Banana Jack: nickel-plated brass; Pin Jack:
gold-plated beryllium copper; Insulation: polypropylene.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 3000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A
131°F (55°C) max.
|
|
| Pomona 3834 Banana
Jack to 0.080in Dia Pin Tip Jack |
$3.15 |
[Add to Cart] |
|
2mm Banana Jack
 |
Max. Panel Thickness: 0.31in
Material: Insulation: nylon; Finish: nickel plating.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A ≤
2 mΩ.
Sold in packages of 10
Not Compatible with Miniature Banana Plug or Pin Tip.
|
|
|
Double Banana Plug with Binding Posts, Stackable, Solderless
 |
Features insulated binding posts on 0.750in centers for
rapid mounting and interchangeability of components. Center
cross hole 0.166in dia. provides side stackup connection.
Material: Binding Post Banana Plug Body: brass; Spring:
Beryllium copper; Insulation: ABS.
Rating: For CE compliance and for personal safety, do not h
hold in hand when voltages exceed 33 Vrms / 70 Vdc.
Maximum voltage for hands free use: 2500 Vdc. Do not use on
circuits where transient stresses can exceed the rated
voltage. 15A 122°F (50°C) max.
|
|
| Pomona 1286 Double
Banana Plug with Binding Posts, Stackable, Solderless - Nickel Plating |
$8.35 |
[Add to Cart] |
|
Pomona
5405
Double Banana Plug with Binding Posts, Stackable, Solderless - Gold Plating |
$12.20 |
[Add to Cart] |
|
Banana Jack to Miniature Banana Plug
 |
Use to male standard 0.166in dia. banana plug to equipment
having miniature banana jacks.
Material: Jack: nickel-plated brass; Spring: nickel-plated
beryllium copper; Insulation: ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands few use: 2500 Vdc. Do not use on circuit
where transient stresses can exceed the rated voltage. 5A,
122°F (50°C) max.
Sold in packages of 10
Available Colors: Black or Red
|
|
| Pomona 2138 Banana
Jack to Miniature Banana Plug (Choose color at checkout) |
$21.05 |
[Add to Cart] |
|
Insulated Double Banana Plug Shorting Bar with Binding Post
 |
Fits standard banana jack
Shorting bar is completely insulated in clear ABS
thermoplastic.
Material: Binding Post. Banana Plug Body. Shorting Bar:
nickel-plated brass; Spring: nickel-plated beryllium copper;
Insulation: polycarbonate.
Rating: For CE Compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Do not
use on circuits where transient stresses can exceed the
rated voltage. 15A 122°F (50°C) max.
Available Colors: Black or Red
|
|
| Pomona 5165
Insulated Double Banana Plug Shorting Bar with Binding Post (choose color at
checkout) |
$10.55 |
[Add to Cart] |
|
Binding Post to Banana Plug
 |
Features insulated binding post for rapid mounting and
interchangeability of components. Accepts standard banana
plug. Center cross hole 0.166in dia. Provides side stackup
connection.
Material: Binding Post/Banana Plug Body: nickel-plated
brass; Spring: nickel-plated beryllium copper; Insulation:
ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 15A,
122°F (50°C) max.
Available Binding Post Colors: Black or Red
|
|
| Pomona 2894 Binding
Post to Banana Plug (Choose color at checkout) |
$4.98 |
[Add to Cart] |
|
2mm Banana Plug
 |
Solder type wire connection.
Accepts 18-22 AWG wire.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms ./ 70 Vdc. Maximum
voltage for hands free use: 500 Vrms. Do not use on circuits
where transient stresses can exceed the rated voltage. 5A, ≤
2 mΩ.
Assembled Length: 1.07in
Sold unassembled, in packages of 10 per color
Not compatible with Miniature Banana Plug or Pin Tip.
Available Colors: Black or Red
|
|
| Pomona 5936 2mm
Banana Plug (Choose color at checkout) |
$5.95 |
[Add to Cart] |
|
Test Connector Adapter Set
 |
Full set of pin and socket adapters.
18 piece set includes one black and red pin and socket of
each size
Includes Silicone insulated 4ft leads to fits most DMMs from
Fluke, Amprobe, Greenlee, and others
|
|
|
Spade Lug to DMM Banana Jack
 |
Plugs into DMM leads. Permits DMM leads to be used with
equipment having barrier strips, or binging post.
Material: Banana Jack: nickel-plated brass; Spade Lug:
Tin-plated copper; Insulation: Polypropylene.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hands free user: 5000 Vdc. Do not use on
circuits where transient stresses can exceed the rated
voltage. 15A 122°F (50°C) max.
Available Colors: Black or Red
|
|
| Pomona 3744A Spade
Lug to DMM Banana Jack (0.14in x 0.24in. For Lug Size: 4, 5, 6) (Choose
color at checkout) |
$1.45 |
[Add to Cart] |
|
Pomona
3777A
Spade Lug to DMM Banana Jack (0.2in x 0.3in. For Lug Size: 8, 10) (Choose
color at checkout) |
$1.90 |
[Add to Cart] |
|
Low Thermal EMF Insulated Spade Lug to Banana Jack
 |
Specially allow and plating preserve the accuracy of low
voltage measurement equipment. Thermal effects are
minimized. Heavy construction for minimum voltage loss.
Mates with low voltage banana plug patch cords and binding
posts.
Material: Jack and Spade Lug: gold-plated tellurium copper;
Insulation :ABS.
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33VMS / 70 Vdc, Maximum
voltage for hands free use: 5000 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage 15A
122°F (50°C) max.
Set of one red and one black
|
|
| Pomona 2305 Low
Thermal EMF Insulated Spade Lug to Banana Jack |
$13.25 |
[Add to Cart] |
|
Connector Test Adapters
 |
An ideal test adapter for rapid testing of the hard-to-get
at contacts of multi-pin/socket connectors. Flexible tip
allows testing of adjacent contacts. Flexibility and full
insulation protects against shorting or contact damage.
Model 4690 also fits 0.025in sq. pins.
Material Banana Jack: nickel-plated brass; Socket:
gold-plated copper; Pin gold-plated brass; Insulation: PVC
Rating: For CE compliance and for personal safety, do not
hold in hand when voltages exceed 33 Vrms / 70 Vdc. Maximum
voltage for hand few use: 2500 Vdc. Do not use on circuits
where transient stresses can exceed the rated voltage. 122°F
(50°C) max.
Available Colors: Black or Red
|
|
| Pomona 4690 22 AWG
Connector Test Adapter (Contact Size: 0.030in, Socket Type) |
$3.75 |
[Add to Cart] |
|
Pomona
4691
22 AWG Connector Test Adapter (Contact Size: 0.030in, Pin Type) |
$3.75 |
| | | | | | |
SHOPPING CART
