 |
JDSU/ TEST-UM Resi-Talker Butt-in
Telephone Test Set
|
Click for larger image
|
JDSU's most
economical test set for basic telephone system work
|
- Tone and Pulse dialing |
| - Microphone
mute |
| - Last number redial - 32 digits |
| - Amplified line monitor
for volume comparable to "off-hook" |
| - Electronic ringer |
| - Modular cord set
attachment |
| - Continuous line polarity indication |
| - Battery-Powered monitor
mode w/auto power-off on deadlines |
| - Low battery indicator |
| - Headset jack |
1 Year Manufacturer Warranty
|
| JDSU / Test-Um LB300 Resi-Talker with
alligator clip set |
$85.05 |
[Add to Cart] |
JDSU/ TEST-UM
Lil' Buttie LB110
|
Click for larger image
|
Product Overview:
Tone and Pulse dialing,
Microphone Mute, Last Number Redial, Continuous Line Polarity Indication (Talk or
Monitor), Electronic Ringer, Amplified Line Monitor for Volume Levels comparable to
"off hook" operation, Modular Cordset attachment, Low Battery Indicator, Headset
Jack, Battery Powered Monitor Mode with auto power off on dead lines or when
disconnected.
|
- Return Loss @ 600 ohms >14dB |
|
- Line
Current Range 15 to 120 mA |
| - Apparent Line Resistance 275 ohms
at 20mA |
| - Pulse Rate 10
pps ± 10% |
| - Make/Break Ratio 60/40% ± 2% |
| - Interdigit
Interval 820 mSec |
| - Leakage During Break >120 Kohms
|
| - DTMF Output
(into 600 ohms) |
| - Tone Frequency Error ± 1.5% |
| - Tone Level |
| - High Group –6dBm ± 2dB |
| - Low Group
–8dBm ± 2dB |
| - High vs Low Tone Difference
2dB ± 1dB |
| - Type Last
Number Redial |
| - Mode Tone and Pulse |
| - Retention |
| - with battery >2 yrs |
| - without
battery 8 min. nom |
| - Capacity 32 digits |
1 Year Manufacturer
Warranty
|
| LB110 With Headset and Bed Of Nails
Clips |
$115.00 |
[Add
to Cart] |
| LB110-BT Lil'
Buttie with bed-of-nails & protective boot |
$168.00 |
[Add to Cart] |
| LB115 With
Headset and Bed Of Nails Clips + AT&T clip Snap |
$120.00 |
[Add to Cart] |
JDSU/ TEST-UM Lil' Buttie Pro LB220
|
Click for larger image
|
Product Overview:
Caller ID
testing, LCD message display, Real Time line
current/voltage measurements. Fast updates, Data Alert-
No disruption of lines in use, Hands Free operation with
the supplied headset, Quick release belt clip, 10 foot
drop ready, Splash/Rain safe, Easy to replace cordset,
Auto-Off for maximum battery life, 5 Memory dial, Last
Number Redial and JDSU / Test-Um tech support in pre-stored
memory, Electronic ringer.
|
- Battery current consumption
(typical) |
|
- BELL (timed out) 15μA |
| - TALK, CWCID off 2mA
CWCID on 12mA |
| -
MON 25mA |
| - Battery life 30–50
hrs typical |
| -
Return Loss 14db @ 600 ohms |
| - Line Current Range
15 to 120 mA |
| -
Apparent Line Resistance 275 ohms at 20mA |
| - Monitor Mode
Impedance >130 Kohms |
| -
Pulse Rate 10 pps ± 10% |
| - Make/Break Ratio
60/40% ± 2% |
| -
Interdigit Interval 820 mSec |
| - Resistance in break
120 Kohms |
| -
Tone Frequency Error ± 1.5% |
| - Tone Level, High
Group –6dBm ± 2dB Low Group –8dBm ± 2dB |
| -
High vs Low Tone Difference 2dB ± 1dB |
| - Type, 5 programmed
and last number redial |
| -
Memory Capacity 19 digits |
| - Memory Retention
with battery >2 years |
| -
Flash Duration 600 mSec ± 50mSec |
| - Pause Duration, Tone
3.0 sec |
| -
Voltage 0 to 128 VDC ± 5% |
| - Current 10 to 140 mA
± 5% |
| -
Operating Temperature 32°F to 122°F (0°C to 50°C) |
| - Storage Temperature
–4°F to 140°F (–20°C to 60°C) |
| -
Length without lanyard 7.25 in (18.4 cm) |
| - Width 2.50 in (6.4
cm) |
| -
Height 1.68 in (4.3 cm) |
| - Weight with cord set
<10 oz (284 g) |
1 Year Manufacturer
Warranty
|
| LB220 With Headset and Bed Of Nails
Clips |
$152.55 |
[Add
to Cart] |
| LB220-BT Lil' Buttie Pro
with bed-of-nails clips & protective boot |
$159.98 |
[Add to Cart] |
| LB230 With Headset and
Bed Of Nails Clips + AT&T clip Snap |
$156.00 |
[Add to Cart] |
JDSU/ TEST-UM Little
Buttie Ranger
|
Click for larger image:
|
Product Overview:
The Ranger™ LB255 is our most powerful telephone test set. It is DSL safe,
incorporates a built-in amplified speaker and includes advanced
features, such as inbound and outbound line identification with caller
ID testing, to make your tests as comprehensive as possible. Lightweight
and compact, it is small enough to carry either in a pocket or small
pouch, but rugged enough to stand up in the field.
|
- DigiView™—DTMF decode allows you to see the
digits as a dial-out is in progress and capture them |
|
- ADLI™
Auto Dial Line Identification |
| - inbound and outbound line
identification with caller ID testing |
| - Trafixguard™—senses
digital lines by identifying under- and overvoltage conditions |
| - Totally DSL safe |
| - Insta-Talk™—amplified
speaker with simultaneous intercom capability for talking while
testing |
| - Amplified speaker with three
volume levels |
| - Enhanced memory
dialing— with alpha and numeric capability |
| - Eight-number memory |
| - Technical
support number programmed into memory dial |
| - Tone and pulse dialing |
| - Microphone mute |
| - Last number redial—24 digits |
| - Electronic
ringer |
| - Amplified line monitor for volume
levels comparable to “off hook” operation |
| - Modular cord set
attachment |
| - Headset for hands-free use |
| - Auto power-off
eliminates dead batteries |
| |
|
LCD display shows: |
| - On-hook voltage |
| - Number dialed |
| - Off-hook current |
| - Set-up
information |
| - Stored numbers |
| - Battery
condition |
| - Continuous polarity indication |
| - Caller ID |
| - Call
waiting/caller ID |
| - Caller ID errors |
1 Year Manufacturer Warranty
|
|
SHOPPING CART
)
)
)
)
){kind=link}