 |
MicroScanner² Cable Verifier
|
Click for larger image |
Product Overview:
The MicroScanner2 Cable Verifier presents a
revolutionary change in voice, data, and video cable testing. It starts by
taking results from what was four different test modes and displaying them
all at once – graphical wiremap, pair lengths, distance to fault, cable ID,
and far end device. What’s more, its integrated RJ11, RJ45, and coax test
ports support virtually any type of low-voltage cable testing with no need
for awkward adapters. The end result is reduced test time and technician
error. That makes high-quality installations more efficient than ever.
Today’s communications technicians have a lot more problems to deal with
than just the cabling. They have to rule out a whole host of potential
cable and service issues before determining the cause of a connection
problem. Is there telephone voltage? What’s the polarity? Is there an
Ethernet switch at the far end? Is PoE available? MicroScanner2
acknowledges this, giving technicians high power vision to verify today’s
most common voice, data, and video services. That means faster, more
comprehensive troubleshooting
|
Revolutionary Interface
|
|
Graphical Wiremap,
Length, Cable ID, and
Distance to Fault Displayed on One Screen |
|
|
Multimedia Support |
|
Tests all Common
Media Types
Including RJ11, RJ45, Coax, with no Need for Adapters
|
|
|
IntelliTone Toning |
|
Locates Virtually any
Cable or Wire
Pair with IntelliTone Digital and Analog Toning
|
|
|
VDV Service Detection
|
|
Verifies Today’s
Media Services,
Including 10/100/1000 Ethernet, POTS, and PoE
|
|
|
Rugged Housing |
|
Integrated Rubber
Holster Enhances Grip
and Makes it Durable Enough for the Toughest Jobs |
|
|
Oversized Display
|
|
Large, Backlit LCD
Makes Results
Crystal Clear Whether in Bright Sunshine or in a
Dark
Closet |
|
[More Info]
|
|
Fluke Networks
MS2-100 MicroScanner2 Cable Verifier |
$405.00 |
[Add to Cart] |
|
Fluke
Networks MS2-KIT
MicroScanner2 Cable Verifier
Kit |
$675.00 |
[Add to Cart] |
Siemon
STM8 UTP Cable Tester
Click for larger image |
|
- Tests
T568A, T568B, USOC, 10BASE-T, Token Ring, and TP-PMD Wiring Configurations
|
|
- Test Cable Runs up to 900m (2950 ft.)
|
|
- The Presence of Line Voltage is
Indicated on the Display to
Help Prevent Accidental Damage to the Unit |
|
- LED Flashes During Testing and Remains
Lit after Pass
|
|
- Indications for 6- and 8-Position
Jacks
|
|
- The STM-8 consists of a hand-held master unit and a remote.
The kit comes packaged in a padded nylon carrying case with two modular test cords, The
Siemon Company's Wiring Reference Guide, instructions, and a 9V alkaline battery. Each of
the four remotes are individually identified by the master unit. |
|
- The UTP Modular Cords are Equipped with
Patented
"Universal" Plugs that Fit into any Standard 6- or 8-Position
Modular Jack. |
|
- Includes a Length Test
Option |
|
Tempo 468
Modular Cable tester
Click for larger image |
Product Overview:
Quickly
identifies opens, shorts, reversals and transposed pairs.
|
- Economical Tester Includes All the
Basic Functions.
|
|
-
Connecting the Receiver Unit Automatically Activates the Test Process.
|
|
-
Sequencing Red and Green LEDs Provide Fast, Accurate and
Simple-to-Understand Results.
|
|
-
Alerts the Technician if Connected to an Active Circuit without Harming the
Unit.
|
|
-
Connect any Eight-Position Modular Plug to the Appropriate Jack on the
Transmitter and a Sweeping Tone Signal is Applied to All Pairs.
|
|
-
At the Far End of the Cable, Use any Tempo Inductive Amplifier (probe) to
Locate the Corresponding Plug or Jack
|
|
-
Battery Operated (9V not included) |
|
JDSU /
Test-Um LanScaper
Click for larger image |
Product
Overview: Perform
physical layer network management with the functions of a high-end cable
tester and length measurement device plus the capability to monitor and
correct network problems associated with the physical layer and link
conditions of the network.
|
-
Identifies Port Services like Ethernet, ISDN, POTS and Token-Ring While
Reporting Network Speed, Capability and Location of Switches and Other
Network Devices |
| -
Pinging Function Verifies Connectivity to Network Devices and Queries
PC/NICs. |
|
-
Detects Legacy "Phantom Power", Reports Current and Voltage Capability
of Analog Telephone Lines, Identifies (maps) Remotes While Cable Testing
|
|
-
Conducts Link Tests to ID Speed |
|
-
Verifies Functional Speed Capability of Terminated Unconnected Cable
Runs by Sampling Data Packets Between Two LanScaper Units, Which
Exercises the Run and Reports the Result |
|
-
Automatically Accesses DHCP Host and Obtains Network Information
|
|
-
Tests Cabling Configuration and Verifies Connectivity and Length of Run
while Conducting Tests for Opens, Shorts, Miswires, Split Pairs, and
Reversals |
|
-
Identifies HUBs, NIC, or Auto MDI/MDI-X Devices |
|
-
Blinks HUBs to Ascertain Connected Configuration |
|
-
Displays Advertised Network Speed/duplex |
|
JDSU /
Test-Um LanRover PRO
Click for larger image
|
Product Overview:
Network cabling tester identifies
length and multiple faults clearly without interpretation. Clear wiremapping
is displayed on two-line, 16-character LCD display.
|
-
Measures Cable Length as a Stand-Alone Function |
|
-
Test for Short, Opens, Miswires, Reversals and Split Pairs |
|
-
Identifies Multiple Faults Clearly Without Interpretation |
|
-
Clear Wiremapping form Displayed in 2-line, 16-Character LCD Display |
|
-
Auto-Off/Auto-On. Up to 10 Times Better Battery Life than Other Testers |
|
-
One-Ended Testing with Pre-Test Mode for Fast Results |
|
-
Built-In Tone Generator with Selectable Tones and Pair Capability |
|
TP600
JDSU / Test-Um
LanRoverPRO Cat 5 Tester |
$148.00 |
[Add to Cart]
|
|
TP607
JDSU / Test-Um LanRoverPRO Cat 5 Tester with eight remotes |
$250.00 |
[Add to Cart]
|
JDSU Resi-Tester
JDSU /
Test-Um Resi-Tester
Click for larger image
|
Product Overview:
Perform essential physical cabling tests
and wiring verification.
|
-
Identifies Line Condition: Shows Opens, Shorts, Miswires, Split Pairs, PASS
and FAIL Results Fast - On a Clear, Full Alpha/Numeric LCD Display |
|
-
Supports a Comprehensive Set of Wiremapping Locators for Cable Location |
|
JDSU Resi-Tester
-
Up to 20 Cable End Locations at a Time can be Identified and Tagged. |
|
-
Sends Tone for Tracing Cabling |
|
-
Configurable Signal can be Generated to Find and Fix the Position on any
Type of Cable - Either Exposed or Hidden, In Ceilings or Behind Walls |
|
Siemon MT5000
 Click for larger image
|
Product Overview: The
MT-5000 is a versatile hand-held cable tester- it is fast, reliable, and
durable. It tests opens, shorts, and miswires from 1- to 25-pair and can
accommodate a combination of 25-pair and modular jack terminations. For
instance, using the TAP-50® test adapter, the remote unit can be
attached to a 66 block that is connected to multiple horizontal cable runs
in the equipment closet. Then, using the modular jack in the Master Unit,
one person can test up to six 4-pair station cables in the work area. Cable
runs of up to 762m (2,500 ft.) can be tested with accuracy. |
|
SHOPPING CART
)
)
)
)
)
)
)
