 |
 |
The VDV PRO Cable Tester is an
easy-to-use cable testing and verification device that
can quickly test all wiring requirements found
throughout today’s residential and commercial
environments.
|
|
- |
Voice – tests 3-pair USOC
and 6-position RJ-11/12 jacks for voice cable testing |
|
- |
Data – tests wire map of
shielded and unshielded cable to T568A/B standard |
|
- |
Video – tests coax cable
for opens, shorts and length with F-Connector interface |
|
- |
Larger backlit LCD screen for better test
results readability |
|
- |
Selectable backlight |
|
- |
Network link LED blink
for visual cable tracing |
|
- |
Voice testing capability
detects RJ-11 (1, 2, or 3 pair) |
|
- |
Voice test also shows
Normal or Reverse for pins 1 through 6 |
|
- |
Length measurement is
shown during initial test results for
convenience and time savings |
|
- |
Eight remotes have RJ-45,
RJ-11 and Coax F-jacks for
increased testing capabilities |
|
- |
Tests for shield
continuity, shorts, opens, miswires, reversals and split
pairs with remote connected |
|
- |
Full dot-matrix LCD
display for user convenience to read display results |
|
- |
One-ended testing for
shorts, opens and split pairs (no remote needed) |
|
- |
Test results displayed in
wire map format with message line for shorts and split
pairs Displays PASS and sounds beep (selectable) for
T568A/B |
|
- |
Will display wire map for
10Base-T and Token Ring with remote connected |
|
- |
UTP, STP, and Coax length
measurement in feet or meters using cable capacitance
method |
|
- |
Coax mapping with up to
eight color coded coax remotes. |
|
- |
Tone generator mode sends
four different tones on all conductors, selected pair or
selected pin |
|
- |
Auto-off in any mode and
low power consumption for long battery life |
|
- |
Low battery symbol
indicates when to change battery |
|
- |
9V battery included and
easy to change in the future as needed |
|
- |
Identifies presence of
voltage on cables |
|
|
|
Ideal Industries 33-770 VDV PRO w/one
remote and terminator |
$240.00 |
[Add to Cart] |
|
Ideal Industries 33-771 VDV PRO w/eight remotes
and terminators |
$330.00 |
[Add to Cart] |
|
Ideal Industries 33-774 VDV PRO Eight Remote Kit
(ID 1-8) |
$125.00 |
[Add to Cart] |
|
Ideal Industries 33-780 VDV Pro w/one remote and
probe |
$275.00 |
[Add to Cart] |
|
Ideal Industries 33-775 Eight Coax Terminator Kit
|
$36.95 |
[Add to Cart] |
VDV MultiMedia Cable Tester Kit
|
Click for larger image
|
|
|
- |
Comprehensive testing for Voice, Data and Video
applications. |
|
- |
Designed for testing in residential and commercial
environments. |
|
- |
Supports RJ11/12, RJ45, and coax F-Connector cabling and
interfaces. |
|
- |
Easy-to-read LCD display with PASS/Miswire indicators, wiremap
display and troubleshooting modes.
|
|
- |
Multi-tone support for cable
tracing and fault isolation.
|
|
- |
Convenient internal storage for
remote.
|
|
- |
Capacity to support additional
remotes |
|
|
|
|
IENet™ PRO - the choice
for Industrial Ethernet cable testing
|
 |
The
tester features a unique easy-to-use cable test for 2
pair and 4 pair Industrial Ethernet cabling. With
shielded 2 pair, M12 and RJ-45 ports, the IENet™ PRO is
compatible with most Industrial Ethernet cabling. Test
results are displayed in the PROFINET® Industrial
Ethernet required format.
Instantly Verify Wiring
Integrity
The IENet™ PRO tester makes it a snap to quickly verify
wiring integrity and assure proper terminations for
diverse types of industrial cabling.
|
|
- |
Simple selection between Voice, 2 and 4 pair
Data, and Coax testing functions (Voice and Video/Security tests via
optional adapters) |
|
- |
Tests for opens, shorts, miswires, reversals,
split pair (user selectable) and length |
|
- |
Indicates correct wiremap to T568A/B
standards for shielded and unshielded cabling |
|
- |
Easy-to-read LCD display with “PASS” or
“Miswire” indicator for each test |
|
- |
Identifies presence of voltages on cables |
|
- |
Tone generator supports four different tones
making fault isolation easier |
|
- |
Integrated remote unit to make storage and
carrying easier |
|
- |
Can support additional optional remotes
making it efficient for one person testing |
|
- |
Network LED blink for visual cable tracing |
|
- |
Numerical indication for UTP “No Shield” and
STP - “Shield” to comply with industrial ethernet PROFINET® requirements |
|
|
|
|
|
PROFINET® is a registered trademark of
PROFIBUS International. |
|
|
|
|
|
Ideal Industries
33-772
IENet™ PRO w/single remote |
$325.00 |
[Add to Cart] |
|
Ideal Industries
33-773
IENet™ Pro w/eight remotes |
$510.00 |
[Add to Cart] |
|
Ideal Industries
33-775
Eight Coax Terminator Kit |
$35.00 |
[Add to Cart] |
|
Ideal Industries
33-776
IENet™ Pro Eight Remote Kit (ID 1-8) |
$268.00 |
[Add to Cart] |
|
Ideal Industries
LA-4233
RJ-45 to RJ-11 jack adapter (2/card) |
$8.50 |
[Add to Cart] |
|
Ideal Industries
LA-4234
RJ-45 to F-Connector adapter (2/card) |
$14.25 |
[Add to Cart] |
|
Ideal Industries
LA-4173
F to BNC Adapter Kit |
$29.98 |
[Add to Cart] |
|
SHOPPING CART
)
)
)
