 |
JDSU /
Test-Um
LanScaper PRO Network Tester
|
Click for larger image |
Product
Overview:
Perform network testing
functions including port discovery, PoE test, ping, hub flash, CDP and
high-end cable testing including length measurement. Monitor and correct
network problems associated with the physical layer and link conditions
of the network.
|
-Network testing capability
includes: port discovery, PoE test, ping, hub flash, CDP |
|
-Cable testing capability
includes: single-ended (no remote) testing of cables for shorts, opens and
split pairs |
|
-Full cable test finds all
wiring faults including split pairs with a remote connected |
|
-Results displayed in wire
map format with a pair by pair status message |
|
-Displays PASS for T568A/B
passing cables |
|
-Remote mapping capability
with remote identifiers |
|
-Measures length |
|
-Generates selectable tones
on selected pins for use with tone tracers |
|
-Auto-MDI/MDI-X Ethernet
connectivity protocol supports connection to hub, switch or NIC with any
patch cable |
|
-Support for six languages;
English, French, German, Italian, Portuguese, and Spanish |
|
-Large backlit LCD allows
for clear display of setup information and test results |
|
-Auto-off in any mode and
low power consumption for long battery life |
|
|
NT800 LanScaperPRO
Cabling and Network Tester
Includes one cable test remote, two 1-ft patch cables,
two RJ45 to alligator clip cables, and one Cordura case |
| |
NT850 LanScaperPRO Cabling and Network
Tester Kit
Includes
eight cable test remotes, 30.48
cm (1 ft) RJ45 to alligator clips cable (TP40), two 30.48 cm (1 ft)
cables with RJ45 connectors (TP55), two 19 cm (7.5 in) RJ12 to RJ12
cables for no-fault connection to RJ11 or RJ45 jacks (TP20),Tone
Tracer Probe (TT100), and nylon case. Requires four AA batteries
(not included). |
| |
|
|
JDSU / Test-Um NT800
LanScaperPRO Cabling and Network Tester |
$499.00 |
[Add to Cart] |
|
JDSU / Test-Um NT850
LanScaperPRO Cabling and Network Tester
Kit |
$665.00 |
[Add to Cart] |
JDSU / Test-Um LanScaper
| |
|
NT700
NT750 |
Product
Overview: Perform
physical layer network management with the functions of a high-end cable
tester and length measurement device plus the capability to monitor and
correct network problems associated with the physical layer and link
conditions of the network.
|
-
Detects Legacy "Phantom Power", Reports Current and Voltage Capability
of Analog Telephone Lines, Identifies (maps) Remotes While Cable Testing
|
|
-
Conducts Link Tests to ID Speed |
|
-
Verifies Functional Speed Capability of Terminated Unconnected Cable
Runs by Sampling Data Packets Between Two LanScaper Units, Which
Exercises the Run and Reports the Result |
|
-
Automatically Accesses DHCP Host and Obtains Network Information
|
|
-
Tests Cabling Configuration and Verifies Connectivity and Length of Run
while Conducting Tests for Opens, Shorts, Miswires, Split Pairs, and
Reversals |
|
-
Identifies HUBs, NIC, or Auto MDI/MDI-X Devices |
|
-
Blinks HUBs to Ascertain Connected Configuration |
|
-
Displays Advertised Network Speed/duplex |
| - NT700
Main Unit with Remote |
|
- Tone Tracer (TT100) |
| - 8 Remote
Identifiers |
|
- RJ45 to
Coax Adapter Cables (TP50) |
| - F to BNC
Adapter (TP62) |
|
- Carrying
Case |
|
JDSU /
Test-Um LanRover PRO
Click for larger image
|
Product Overview:
Network cabling tester identifies
length and multiple faults clearly without interpretation. Clear wiremapping
is displayed on two-line, 16-character LCD display.
|
-
Measures Cable Length as a Stand-Alone Function |
|
-
Test for Short, Opens, Miswires, Reversals and Split Pairs |
|
-
Identifies Multiple Faults Clearly Without Interpretation |
|
-
Clear Wiremapping form Displayed in 2-line, 16-Character LCD Display |
|
-
Auto-Off/Auto-On. Up to 10 Times Better Battery Life than Other Testers |
|
-
One-Ended Testing with Pre-Test Mode for Fast Results |
|
-
Built-In Tone Generator with Selectable Tones and Pair Capability |
|
TP600
JDSU / Test-Um
LanRoverPRO Cat 5 Tester |
$148.00 |
[Add to Cart]
|
|
TP607
JDSU
/ Test-Um
LanRoverPRO Cat 5 Tester with eight remotes |
$250.00 |
[Add to Cart]
|
JDSU / Test-Um Testifier Pro
|
Click for larger image
|
Product Overview:
Perform essential physical
cabling tests and wiring verification including length measurement.
|
- Tests for shorts, opens,
miswires, reversals, and split pairs |
|
- Measure cable length and send
tone as tone generator |
|
- Displays PASS icon for correctly
wired T568A/B and 6-pin telephone cable |
|
- Two-line, 16-character full
alphanumeric LCD with icons for clear results |
|
- Integrated jacks for Telco and
Network connections, F-connector for coax |
|
- Separate Telco, Coax, and
Network mode buttons for easy test selection |
|
- Cable test results displayed in
wire map format along with diagnostic messages |
|
- Auto-off and timed backlight in
any mode for low power consumption and long battery life |
|
|
|
TP650
TestifierPro Cable Tester, #1 Remote, Pouch |
|
TP655
TestifierPro Cable Tester, #1 to 8 Remotes, Zippered Pouch |
|
|
|
|
JDSU / Test-Um Testifier
|
Click for larger image
|
Product Overview:
Perform essential physical cabling tests and wiring
verification.
|
-
Identifies line condition: Shows opens, shorts, miswires, split pairs, PASS
and FAIL results fast - on a clear, full alpha/numeric LCD display
|
|
-
Supports a comprehensive set of wiremapping locators for cable location |
|
-
Up to 20 cable end locations at a time can be identified and tagged.
|
|
-
Sends tone for tracing cabling
|
|
-
Configurable signal can be generated to find and fix the position on any
type of cable - either exposed or hidden, in ceilings or behind walls |
|
JDSU / Test-Um Resi-Tester
Click for larger image
|
Product Overview:
Perform essential physical cabling tests
and wiring verification.
|
-
Identifies Line Condition: Shows Opens, Shorts, Miswires, Split Pairs, PASS
and FAIL Results Fast - On a Clear, Full Alpha/Numeric LCD Display |
|
-
Supports a Comprehensive Set of Wiremapping Locators for Cable Location |
|
JDSU Resi-Tester
-
Up to 20 Cable End Locations at a Time can be Identified and Tagged. |
|
-
Sends Tone for Tracing Cabling |
|
-
Configurable Signal can be Generated to Find and Fix the Position on any
Type of Cable - Either Exposed or Hidden, In Ceilings or Behind Walls |
|
JDSU / Test-Um Wi-Net Window
Click for larger image |
Product Overview: Identify, clarify, and configure all the wireless
transmission equipment on a site. Prevent conflicts of internet access over
wireless points and give a clear picture of the range and availability of
each wireless access point.
Shows a wide range of critically important information connected with
wireless equipment regarding their identity, functionality, and capability.
Full Alpha/Numeric LCD display shows all information in a concise and clear
manner for ease of use. Easy-to-use navigation buttons and screen prompts.
|
- Signal strength shown as both a
percentage on the LCD and a light bar up to 100% |
|
- Equipment name and channel of
transmission identified |
|
- Identifies and communicates with
IEEE 802.11 wireless access points types b and g |
|
- Lists and logs all received
wireless transmissions in the area for review with constant scanning |
|
- Displays encryption condition on
each wireless component |
|
- Lists signal as either an access
point or an ad-hoc or Twin network type. |
|
- Ping function accesses IP
addresses and determines an internet link condition |
|
- Negotiates with network DHCP for
component identification and IP/MAC addresses |
|
- Uses four alkaline or
rechargeable batteries (not provided) |
[More Info]
|
TrueLength Cable Length Meter
|
Click for larger image |
Enables
technicians to quickly find and repair cable problems
and
verify new installations, and more
The JDSU TrueLength measures cable
length plus generates tone with exceptional accuracy and
speed. It helps find and repair existing cable problems
or verify new installations to save precious time on the
job. Optimal for today's electrical contractor, datacom
contractor and installer, and even service provider
technicians, TrueLength works on any single or two
conductor cable, offering multiple wire gauge settings
(12 pre-set and 12 user-programmable); and, four
selectable tones when in tone generation mode.
|
- |
Measures distance to opens or shorts
|
|
- |
Operation modes: AWG/mm/mm2, Telco, Network, Coax, Tone
Generator, and Ohms
|
| - |
Measures conductor length in feet or meters
|
| -
|
Provides audible indicator for shorted wires |
|
- |
Measures copper or aluminum wires 8 to 30 AWG (3.264 to 0.255 mm,
8.366 to 0.051 mm2)
|
|
- |
9 V
battery operation (not included) |
| |
|
|
- |
Troubleshoot new or existing lines by measuring distance to shorts
or opens, and shorts between lines
|
|
- |
Trace
wires by generating up to four trace tones
|
| - |
Manage
cable inventory by measuring length on spools
|
| -
|
Determine if wire length on spools is adequate
|
| |
|
| |
For More Information on the Truelength TDR click here |
| |
|
|
|
JDSU / Test-Um
CLM400
TrueLength Cable Length Meter TDR |
$179.00 |
[Add to Cart] |
|
SHOPPING CART
)
)
)
)
)
)
)
)
)
