1020-00-RAB 13.4 in. Skybar NEMA-4 Plastic Wi-Fi Access Point Enclosure with Opaque Screw-on Cover & Right-Angle Mounting Bracket Accessory.
Oberon’s Skybar 1020 series compact NEMA 4 AP enclosure is designed specifically to protect APs in challenging environments such as stadiums, auditoriums, gymnasiums, industry and outdoors. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals so APs with body integrated antennas or small detachable antennas may be protected. The enclosure is paintable. This is the smallest NEMA 4 enclosure for most APs and is ideal for under-seat installation in public venues. Available with clear cover (-C), with Under Seat Mounting 30º bracket (-USM30), Right Angle Bracket (-RAB) for wall mounting, or with Pole Mount Kit (PMK) for mounting on light poles.Compact, rugged NEMA 4 Skybar™ shaped enclosure for installing APs in physically challenging environments. Ideal for under seating and riser installations
Virtually transparent to wireless signals
Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
Cover attaches with four tamper resistant stainless steel screws, available with clear cover
Available in underseat mounting, wall mounting, and pole mounting configurations
Features & Benefits
Design: Compact, rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, and for under seating and riser installation, wall mounting, or light pole mounting
Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
Oberon Skybar™ shaped screw on cover with gasket. Cover screws must be torqued to 8 in-lbs. Cover screws are recessed into cover. Comes with standard and tamper resistant screws
Internal universal T-bar bracket
AP max. operating temperature should be de-rated by 11° C inside the enclosure
-00: Body and cover are light gray UL94-V0 PBT/PC blended plastic
-C: Clear cover, UL94-V0 PBT/PC blended plastic
-RAB: Exterior grey powder coated 10ga steel right-angle wall mounting bracket
-PMK: Adjustable worm gear stainless steel clamps
-USM30: Aluminum, grey, powder coated 30 degree angle bracket
-C configuration has a clear screw on cover to allow visibility of status LEDs
-RAB configuration mounts AP in preferred horizontal orientation on walls. Right angle bracket acts as a sun shield to reduce solar heat load
-PMK configuration has adjustable worm gear clamps for square and round poles with diameters from 4 to 7 in. (requires -RAB)
-USM30 mounts AP at 30° angle in under seat installations, or on high walls
For similar enclosures accommodating Cisco Series 4800 APs, please refer to Oberon Models 1021 or 1022.
Measurements (Maximum values):
Width: 9.06 in.
Height: 10.78 in.
Depth: 7.39 in.
Item Weight: 5 lbs.
Shipping Weight: 6 lbs.
(1) UL94-V0 Gray Polycarbonate NEMA 4 Enclosure
(1) T-bar bracket
(4) Cushioning washers
(4) #6 x 1/4 in. flat head screws
(4) #6 x 1/4 in. pan head screws
(4) M4 x 20 mm lid screw
(4) M4 x 20 mm Torx head tamper resistant lid screws
Gray powder coated steel right angle bracket
(4) M4 x 10 mm Bracket Screw
(4) 4 mm Lock Washer