AMP Netconnect MRJ21 Connector System for Data Centers

Prev 1 2 3 4 5 6 7 8 9 10 11 12 Next 

 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
- MRJ21 cable assemblies' small foot print reduces cable bulk un pathways and conduits
- Reduced cable bulk allows better air circulation and equipment cooling in data centers
- Approximately 30% less area and 20% less weight than 4-pair cabling
- Dense CHAMP connector style double blade design with offset jackscrews
- Contact layout and footprint for differential pairs creates reduced cross-talk and built in compensation.
- 1.5 to 4 times the port density of 2x6 Stacked Modular Jack (RJ45)
- Jackscrews for positive latching and secure cable retention
- Common and additional cable assembly lengths are available - contact your local sales engineer for more information
- 25-Pair, unshielded, 24 AWG conductors
- Enables 25% les power per port than 4-pair connector on active electronics
- Improves uptime and space efficiency on site
- RoHS compliant
- MRJ21 to RJ45 hydra cable assemblies are wired so that all 4 pairs of the RJ45 are active for Gigabit Ethernet.
- Most assemblies are available with riser rated (CMR) or plenum rated (CMP) jacketing
- Simple installation - Just seat the connector and tighten the two screws
- Factory terminated, tested and serialized
   
  A: MRJ21 180 Back Shell
  B: MRJ21 45 Back Shell
  C: RJ45 x 6


Reviews

Write a review | No reviews for this product.
Prev 1 2 3 4 5 6 7 8 9 10 11 12 Next