T3 Innovation PLR600 Power Prowler 3-In-One DMM/TDR Cable Fault Finder for Energized or Unenergized Cables

Home > datacomtools Products >

T3 Innovation PLR600 Power Prowler 3-In-One DMM/TDR Cable Fault Finder for Energized or Unenergized Cables

SKU:

PLR600

Your Price: $474.95
Condition: New
In Stock
Free Ground Shipping on orders over $99.00
Qty:
in stock
  • Details
  • Reviews
  • FAQ's
 

Digital Multimeter

  The following Multi-Meter Functions are supported:
- DC Volts, 10M Ohm input impedance
- AC Volts, 10M Ohm input impedance
- AC Volts with a lower impedance to reduce ambient noise pickup
- Continuity with audible signal for low resistance
- Ohms measurement

 

Fault Location

  Quick Picture of Existing Cable Faults & Condition
  Measures distance to shorts or open faults and measures cable length. Fault Location has the following features:
- Library of common cable type VOP values
- Calibration mode – Input the known length of a cable and
Power Prowler calculates the VOP
- Measures accurate distances to shorts or open faults

 

Live Event Detection

  Continuous Monitoring for Live Event Detection
  Continuously samples circuit to monitor charges.
- Detect, locate and characterize cable faults
- Ability to time stamp events
- Detect, locate, and characterize existing faults
- Large color LCD display
- Easy to use
- High quality industrial grade accessories and adapters
- Built-in list of cable types and their VOP values
- Audio indication when a change/ fault is detected
- Favorites list for commonly tested cable types
- Capable of accuracy to fault of better than 1%
- Control over power saving features such as auto-off and backlight dim
- Multilingual (English, French, Spanish)


Measurement Technology Spread Spectrum Time Domain Reflectometry
US Patents and Patents Pending

Multimeter Section
Description Range Resolution Accuracy (% + counts)
DC Volts 600V
400.0V
40.00V
4.000V
1V
0.1V
0.01V
0.001V
± (0.5% + 2)
Auto-ACV LoZ
True-RMS
600V
400.0V
40.00V
4.000V
1V
0.1V
0.01V
0.001V
± (2.0% + 3) DC, 45-500 Hz
± (4.0% + 3 ) DC, 500-1 kHz
AC Volts
True-RMS
600V
400.0V
40.00V
4.000V
1V
0.1V
0.01V
0.001V
± (1.0% + 3) DC, 45-500 Hz
Ohms 400.0 K Ohms
4.000 K Ohms
40.00 K Ohms
400.00 M Ohms
4.000 M Ohms
0.1 Ohms
0.001 K Ohms
0.01 K Ohms
0.1 M Ohms
0.001 M Ohms
± (0.9% + 2)
± (0.9% + 2)
± (0.9% + 2)
± (0.9% + 2)
± (0.9% + 2)
Languages English, French, Spanish
Power
6x AA alkaline batteries, typical battery current:
Off mode - 4.25 uA
Multi-meter mode: 81 mA with backlight, 41 mA dim back light
Fault Location: 82mA - one test per minute with backlight
Live Event Detection: 115 mA when active with backlight,
75 mA dim backlight
Battery Life
6 x AA alkaline batteries
Standby - life of the battery
Operating - 20 to 30 hours, mode dependent
Batteries are included
Maximum Range
12,000 ft (3,657 m) at .999 VOP
Maximum testable cable length varies with VOP and cable type.
VOP (%) with 3 digit precision ranging from 20.0% to 99.9%
Output Connector
Banana Jacks 600V CAT III
Leader Cable
Cable Assembly, 5 ft. (1.5 m) 600 Volt CAT III, 95 Ohm
Altitude
10,000 ft. (3048 m) operating
Temperature
Operating: 14 to 122°F (-10 to 50°C);
Storage: -4 to +140°F (-20 to 60°C)
Humidity
10 to 90% non-condensing
Enclosure
High-strength PC/ABS plastic with V0 rating with boot
Size
1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)
Weight
With batteries: 1 lb 2 oz (510 g)
Safety Compliances
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, EMC EN61326-1
Warranty
1 Year

  Kit Includes:
- Power Prowler Main Unit
- Meter Test Leads
600V CAT III
- BNC (F) Double Banana Plug
- BNC (M) to F Connection (F)
- BNC (M) to Alligator Clips
- Hanging T3 Pouch

Write a review | No reviews for this product.
   
  Q. What is SSTDR?
  A. SSTDR stands for spread spectrum Time Domain Reflectometry. It differs from traditional TDR measurement devices by using multiple spread spectrum signals.
   
  Q. Can the Power Prowler measure a single conductor?
  A. No, TDR and SSTDR require two conductors to measure a wire or cable
   
  Q. What’s the Difference between Fault Location and Live Event Detection?
  A. The Fault Location test performs a single cable measurement to a fault. The Live Intermittent Fault Detection will monitor a cable and identify an intermittent fault.
   
  Q. Why do cable measurements like Romex differ in length using the Power Prowler when coiled vs. uncoiled?
  A. The cable impedance can be affected by coiling it because it creates inconsistency between the spacing of the conductors which can affect the VOP value.
   
  Q. I don’t know what my cable VoP is.
  A. The Power Prowler can discover your cable’s VoP in the Fault Location menu. Connect to a known length of cable that’s at least 15ft long (for best accuracy, connect to a 50ft or longer cable). Press the CAL soft key and use the up and down arrow buttons to enter the length of the cable. Press the test button to calibrate. Please refer to the instruction manual for more details.
   
  Q. Why does the voltage fluctuate in Multi-Meter mode?
  A. The Power Prowler has a high sensitivity digital multi meter mode. Fluctuations will be detected and displayed. If the voltage fluctuation is significant, select Min/Max soft key, then select the “Average” soft key.
   
  Q. What is the warranty on the Power Prowler?
  A. One year from date of purchase.