PrevSet Prev 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 

 
  • Details
  • Reviews

Siemon S110 field termination kits combine category 5e performance with unparalleled installation features. Each kit includes connecting blocks to complete each 25-pair termination strip on the S110 wiring block (e.g. S110AB2-100FT includes five 4-pair and one 5-pair connecting block per 25-pair termination strip, or a total of twenty 4-pair and four 5-pair connecting blocks).

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

This 50-pair S110 block can be mounted on the same S89B or S89D brackets that hold our S66 blocks. The wiring base is available separately or as part of a field-terminated kit that includes the 4- or 5-pair connecting blocks and designation strips

Use (X) to specify connecting blocks: A = 5-pair, B = 4-pair

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

This 50-pair S110 block can be mounted on the same S89B or S89D brackets that hold our S66 blocks. The wiring base is available separately or as part of a field-terminated kit that includes the 4- or 5-pair connecting blocks and designation strips

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon S110 wiring blocks allow designation labels to be mounted between each row of connecting blocks. Each label has 2-, 3-, 4-, and 5-pair markings and may be used for color-coding services in accordance with TIA/EIA-606-A.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon S110 wiring blocks allow designation labels to be mounted between each row of connecting blocks. Each label has 2-, 3-, 4-, and 5-pair markings and may be used for color-coding services in accordance with TIA/EIA-606-A.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s cable management rack system (RS) combines a 2.1m (7 ft.) x 19 inch black aluminum or steel rack with cable management accessories to provide a complete management solution. Ideal for all size installations, the rack features fully usable 45 RMS capacity. An optional 1.2m (4 ft.) power strip is available and mounts directly to rear of rack to provide power to active electronics.

- Header bars incorporate unique slotted holes for securing cable trays routed perpendicular to or parallel with RS racks
- High capacity twist-lock cable managers lock into place quickly without use of screws or mounting tools and can be easily located in many positions on the front, side, back, and within channel to provide customized cable management
- RS-07 shown with two VPC-6 Vertical Patching Channels (sold separately)
- Vertical Patching Channels are available in standard 152mm (6 in.) version or new high capacity 304mm (12 in.) version
- Mounting holes provided for anchoring rack to floor

*Not eligible for free shipping

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon has developed a rack for managing extra large volumes of horizontal cables. The new extended depth rack features vertical channels which are 0.37m (14.5 in.) deep. These channels include multiple mounting holes allowing the user to configure Siemon’s twist-lock hook and loop cable managers for properly managing large individual bundles of cables. The footers have also been designed to retain the 0.61m (24 in.) footprint.

*Not eligible for free shipping

Reviews

Write a review | No reviews for this product.
Siemon SBH-2 2 RMS stand-off bracket

Siemon SBH-2 2 RMS stand-off bracket

 
SKU: SBH-2
Your Price: $59.15
 
 
  • Details
  • Reviews

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Reviews

Write a review | No reviews for this product.
Siemon SBH-3 3 RMS stand-off bracket

Siemon SBH-3 3 RMS stand-off bracket

 
SKU: SBH-3
Your Price: $78.45
 
 
  • Details
  • Reviews

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Reviews

Write a review | No reviews for this product.
Siemon SBH-4 4 RMS stand-off bracket

Siemon SBH-4 4 RMS stand-off bracket

 
SKU: SBH-4
Your Price: $87.98
 
 
  • Details
  • Reviews

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Reviews

Write a review | No reviews for this product.
Siemon SBH-6 6 RMS stand-off bracket

Siemon SBH-6 6 RMS stand-off bracket

 
SKU: SBH-6
Your Price: $123.95
 
 
  • Details
  • Reviews

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Designed to mount directly to overhead ladder rack or cable tray, Siemon’s Cable Tray Rack delivers 4U of easily installed and accessible 19” rack mount space above cabinets and racks without consuming additional floor space, making it ideal for use as a Zone Distribution Area (ZDA) or Equipment Distribution Area (EDA) in data centers. Used with copper patch panels or fiber enclosures, the cable tray rack can increase cabling density, improve cable routing, simplify moves, adds and changes and provide pre-cabled connectivity for rapid deployment of new cabinets, racks and equipment.

- Improved Thermal Efficiency ­- Helps improve airflow by managing patching fields and cabling above cabinets and racks, minimizing obstruction of equipment cooling features.
- Rapid Data Center Deployment -­ Can be used in conjunction with Siemon’s
pre-terminated copper and fiber solutions to reduce installation time
- Open Compatibility -­ Rack mount solution attaches to all common overhead cable tray and ladder rack systems, including Siemon’s RouteIT system.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The multi-access horizontal cable manager design provides cable management for both the front and rear of the rack, is compact in size (1 RMS). The managers feature high capacity slots for entering and exiting cables with a single piece removable cover

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The multi-access horizontal cable manager design provides cable management for both the front and rear of the rack, is compact in size (1 RMS). The managers feature high capacity slots for entering and exiting cables with a single piece removable cover

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- Basic termination kit for 10Base-T
- Includes, UTP/Coax Stripper, Telemaster RJ-11/RJ-45 Tool, (50) 8-Position RJ-45 Non-Keyed Solid Plugs

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Field-Terminated M Series S66 Blocks are available in multiple configurations. Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

Reviews

Write a review | No reviews for this product.
Ideal 150053 NiMH Battery Pack

Ideal 150053 NiMH Battery Pack

 
SKU: 150053
Your Price: $45.00
 
 
  • Details
  • Reviews

Ideal 150053 NiMH Battery Pack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal MGKSX1 1000BASE-SX Fiber Kit. Includes 850nm SFP (Small Form factor Pluggable) SX transceiver, and LC/SC duplex multimode cable

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal MGKLX2 1000BASE-LX Fiber Kit. Includes 1310nm SFP (Small Form factor Pluggable) LX transceiver and LC/SC duplex multimode cable

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal MGKZX3 1000BASE-ZX Fiber Kit. Includes 1550nm SFP (Small Form factor Pluggable) ZX transceiver and LC/SC duplex singlemode cable

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal 158050 Kit of 12 x RJ45 remote units* (#1 - #12)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal 158051 Kit of 24 x RJ45 identifiers** (#1 - #24)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Ideal 158053 Kit of 12 x coax remote units* (#1 - #12)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  - 1 RU and 2 RU units contain sliding and removable front and rear access panels, providing convenient access points
  - Designed for 48.26 cm (19") EIA rack or cabinet environment; optional brackets to accommodate 58.42 cm (23-inch) rack or cabinet mounting
  - Density: up to 72 terminations in 1 RU
  - Low profile design with higher density for space limited applications
  - User friendly design utilizing industry standard LSX/LGX adapter packs
  - Side and rear cable entry points on back of panel supports a wide range of applications
   
Applications and Benefits:
  - High-density makes suitable for telecom and equipment rooms
  - Can be cabinet mounted for data center applications

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  - 1 RU and 2 RU units contain sliding and removable front and rear access panels, providing convenient access points
  - Designed for 48.26 cm (19") EIA rack or cabinet environment; optional brackets to accommodate 58.42 cm (23-inch) rack or cabinet mounting
  - Density: up to 72 terminations in 1 RU
  - Low profile design with higher density for space limited applications
  - User friendly design utilizing industry standard LSX/LGX adapter packs
  - Side and rear cable entry points on back of panel supports a wide range of applications
   
Applications and Benefits:
  - High-density makes suitable for telecom and equipment rooms
  - Can be cabinet mounted for data center applications

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  - 1 RU and 2 RU units contain sliding and removable front and rear access panels, providing convenient access points
  - Designed for 48.26 cm (19") EIA rack or cabinet environment; optional brackets to accommodate 58.42 cm (23-inch) rack or cabinet mounting
  - Density: up to 72 terminations in 1 RU
  - Low profile design with higher density for space limited applications
  - User friendly design utilizing industry standard LSX/LGX adapter packs
  - Side and rear cable entry points on back of panel supports a wide range of applications
   
Applications and Benefits:
  - High-density makes suitable for telecom and equipment rooms
  - Can be cabinet mounted for data center applications

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- Optional integrated splice module on the 4 & module panel version
- Utilizes standard RMG series adapter packs.
- Compact design
- Fully enclosed design, with optional field installable locks.
- Wrap-around client-side door design provides maximum adapter accessibility for client-side patching
- Multi-sized cable entry knockouts supports either ½-inch or ¾-inch cable grommets for maximum cable strain relief and protection

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- Optional integrated splice module on the 4 & module panel version
- Utilizes standard RMG series adapter packs.
- Compact design
- Fully enclosed design, with optional field installable locks.
- Wrap-around client-side door design provides maximum adapter accessibility for client-side patching
- Multi-sized cable entry knockouts supports either ½-inch or ¾-inch cable grommets for maximum cable strain relief and protection

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- Optional integrated splice module on the 4 & module panel version
- Utilizes standard RMG series adapter packs.
- Compact design
- Fully enclosed design, with optional field installable locks.
- Wrap-around client-side door design provides maximum adapter accessibility for client-side patching
- Multi-sized cable entry knockouts supports either ½-inch or ¾-inch cable grommets for maximum cable strain relief and protection

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The RMG Series offers a variety of standard modular adapter packs to accommodate most applications. They utilize the industry standard LSX/LGX footprint and are readily available.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The INFINeSTATION™ modular plate system features front loading installation using Hubbell’s XCELERATOR™ jacks and our comprehensive offering of Audio/Video connectors and keystone fiber adapters in single and double-gang applications.

The IMF modular plates provides the flexibility to tailor each workstation solution to your specific requirements. The front-loading plates accept modules in 3 Unit combinations for single-gang and 6 Unit combinations for double-gang applications (3 units per gang).

  Features:
- Flush Keystone mounting.
- High density: 6-port (single). 12-port (double).
- Field configurable.
- Front-loading, easy snap in assembly.
- Easy module release latch.
- Supports copper and fiber applications.
- Flush mounting with box eliminators

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The INFINeSTATION™ modular plate system features front loading installation using Hubbell’s XCELERATOR™ jacks and our comprehensive offering of Audio/Video connectors and keystone fiber adapters in single and double-gang applications.

The IMF modular plates provides the flexibility to tailor each workstation solution to your specific requirements. The front-loading plates accept modules in 3 Unit combinations for single-gang and 6 Unit combinations for double-gang applications (3 units per gang).

  Features:
- Flush Keystone mounting.
- High density: 6-port (single). 12-port (double).
- Field configurable.
- Front-loading, easy snap in assembly.
- Easy module release latch.
- Supports copper and fiber applications.
- Flush mounting with box eliminators

Reviews

Write a review | No reviews for this product.
Hubbell NSOBNK14 Basic home network kit

Hubbell NSOBNK14 Basic home network kit

 
SKU: NSOBNK14
Your Price: $122.55
 
 
  • Details
  • Reviews

  Features:
- Flush or surface mount enclosure (hardware provided)
- Hinged cover can be mounted to swing from either side
- Integral trim ring hides rough-in hole in sheet rock providing a finished appearance
- Horizontal and vertical module mounting holes for maximum flexibility
- Unique 89D bracket mounting holes allow easy mounting of 66 blocks and peripherals
- Provisions to mount optional duplex power and lock kit available
- Integral cable management slots and tie-wraps provided to help dress cable runs
- Additional nylon push pins provided to assist module mounting
- Material: 20-18 gauge steel
- Finish: white, powder coat
- UL and cULus Listed 1863


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

netSELECT® Modular Components enable the designer to select performance requirements specifically for the application. Modules snap horizontally or vertically into the enclosures for maximum flexibility and optimum space usage.

  Features:
- Dimensions: 6.47 in. W x 2.95 in. H, except NSOMTM24 6.47 in. W x 6.00 in. H
- Meets FCC Part 68 standard
- Material: High impact plastic
- UL and cULus Listed 1863
- All data and phone modules 568A wired

Reviews

Write a review | No reviews for this product.
Hubbell NS612xx Decorator Frames 2-Port

Hubbell NS612xx Decorator Frames 2-Port

 
SKU: NS612xx
Your Price: $2.55
 
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
Hubbell NS613xx Decorator Frames 3-Port

Hubbell NS613xx Decorator Frames 3-Port

 
SKU: NS613xx
Your Price: $2.55
 
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
Hubbell NS614xx Decorator Frames 4-Port

Hubbell NS614xx Decorator Frames 4-Port

 
SKU: NS614xx
Your Price: $2.80
 
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame

- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP12xx Multimedia Face Plates, 1-Gang, Standard, 2-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP13xx Multimedia Face Plates, 1-Gang, Standard, 3-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP14xx Multimedia Face Plates, 1-Gang, Standard, 4-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP16xx Multimedia Face Plates, 1-Gang, Standard, 6-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP101xx Multimedia Face Plates, 1-Gang, Midsize, 1-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP102xx Multimedia Face Plates, 1-Gang, Midsize, 2-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP103xx Multimedia Face Plates, 1-Gang, Midsize, 3-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP104xx Multimedia Face Plates, 1-Gang, Midsize, 4-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP106xx Multimedia Face Plates, 1-Gang, Midsize, 6-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP24xx Multimedia Face Plates, 2-Gang, 4-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP26xx Multimedia Face Plates, 2-Gang, 6-Port

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell CS1976H Equipment Rack with 6” Wide Z-Channels, 84”H x 19”W, 3” Rail Depth, Hinged, Black

Reviews

Write a review | No reviews for this product.
Hubbell VCKH Hinge Kit

Hubbell VCKH Hinge Kit

 
SKU: VCKH
Your Price: $113.00
 
 
  • Details
  • Reviews

Hubbell VCKH Hinge Kit

Reviews

Write a review | No reviews for this product.
Hubbell VCJK Joining Kit

Hubbell VCJK Joining Kit

 
SKU: VCJK
Your Price: $18.05
 
 
  • Details
  • Reviews

Hubbell VCJK Joining Kit

Reviews

Write a review | No reviews for this product.
"Hubbell MCCVMR2 Bracket, one side"

Hubbell MCCVMR2 Bracket, one side

 
SKU: MCCVMR2
Your Price: $39.55
 
 
  • Details
  • Reviews

Hubbell MCCVMR2 Bracket, one side

Reviews

Write a review | No reviews for this product.
"Hubbell MCCVMR22 Bracket, between jacks"

Hubbell MCCVMR22 Bracket, between jacks

 
SKU: MCCVMR22
Your Price: $37.25
 
 
  • Details
  • Reviews

Hubbell MCCVMR22 Bracket, between jacks

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell ICKSS Package of 50 spools 3”, black

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell ICKSS6 Package of 50 spools and screws, 6”, black

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell ICKSS9 Package of 50 spools and screws, 9”, black

Reviews

Write a review | No reviews for this product.
Hubbell VCF610 Black Fiber Spools

Hubbell VCF610 Black Fiber Spools

 
SKU: VCF610
Your Price: $53.98
 
 
  • Details
  • Reviews

Hubbell VCF610 Black Fiber Spools

Reviews

Write a review | No reviews for this product.
"Hubbell VSC6 Cover with 38.5"" H 6""W"

Hubbell VSC6 Cover with 38.5" H 6"W

 
SKU: VSC6
Your Price: $58.80
 
 
  • Details
  • Reviews

Hubbell VSC6 Cover with 38.5" H 6"W

Reviews

Write a review | No reviews for this product.
"Hubbell VSC6L 45.3"" H, 6"" W"

Hubbell VSC6L 45.3" H, 6" W

 
SKU: VSC6L
Your Price: $58.80
 
 
  • Details
  • Reviews

Hubbell VSC6L 45.3" H, 6" W

Reviews

Write a review | No reviews for this product.
"Hubbell VSC4 38.5"" H, 4"" W"

Hubbell VSC4 38.5" H, 4" W

 
SKU: VSC4
Your Price: $58.80
 
 
  • Details
  • Reviews

Hubbell VSC4 38.5" H, 4" W

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- High Density Delivery of Power, Data, and AV
- Stud or Sheetrock Mounting Flexibility
- Steel Construction for Residential MDU and Commercial Applications
- Easily Reconfigured to Adapt to New Applications
   
  Specifications
- 18ga cold rolled steel base
- White powder coat finish
- High impact ABS trim ring
- Standards/Listings/Verifications
- cULus 1863 listed
- UL V0 flame rating on ABS trim ring

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- High Density Delivery of Power, Data, and AV
- Stud or Sheetrock Mounting Flexibility
- Steel Construction for Residential MDU and Commercial Applications
- Easily Reconfigured to Adapt to New Applications
   
  Specifications
- 18ga cold rolled steel base
- White powder coat finish
- High impact ABS trim ring
- Standards/Listings/Verifications
- cULus 1863 listed
- UL V0 flame rating on ABS trim ring

Reviews

Write a review | No reviews for this product.
"Hubbell NSOKPTR Standard power kit, White"

Hubbell NSOKPTR Standard power kit, White

 
SKU: NSOKPTR
Your Price: $27.25
 
 
  • Details
  • Reviews

Hubbell NSOKPTR Standard power kit, White

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSOKPS Surge protected power kit, Blue

Reviews

Write a review | No reviews for this product.
"Hubbell SFHCBK HDMI snap fit, Black"

Hubbell SFHCBK HDMI snap fit, Black

 
SKU: SFHCBK
Your Price: $16.05
 
 
  • Details
  • Reviews

Hubbell SFHCBK HDMI snap fit, Black

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSF70W F-connector snap fit, White

Reviews

Write a review | No reviews for this product.
"Hubbell SFUSBABW USB A-to-B snap fit, White"

Hubbell SFUSBABW USB A-to-B snap fit, White

 
SKU: SFUSBABW
Your Price: $18.45
 
 
  • Details
  • Reviews

Hubbell SFUSBABW USB A-to-B snap fit, White

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NP26W 1-gang decorator plate, White

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSIMF1W 1-gang Hubbell iSTATION plate, White

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell NSP14W 1-gang 4-port keystone plate, White

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

For use with 36” deep QUADCAB® enclosures Contents: 1 shelf and mounting hardware kit

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell MCCPSHLF Equipment Shelf, Stationary, Perforated, 17.7” W x 29.13” D, Black

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Pre-Configured Version
Contents: base/rear section with welded 19” brackets for 2 hubs, front door with 2 locks (NSQ tool), a set of 19” extension brackets for 3 additional hubs (RE4xx only) and a set 19” bottom hinge brackets for patch panels

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Contents: assembled side-hinged wall bracket Rack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Contents: assembled side-hinged wall bracket Rack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Contents: assembled side-hinged wall bracket Rack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OPTIchannel 2-door FCW series are designed for applications that require interconnections, cable management and routing of fiber in a secure environment. Cabinets come equipped with a lock on the installer-side to prevent unauthorized access to terminations.

Cable entry ports are aligned on the top and bottom of each cabinet. This allows stackable mounting, so cables can be easily run from one cabinet to the next. FCW series cabinets are available in two sizes. Adapter Panels are sold separately.

The FCW4SP cabinet provides for a maximum of 4 FSP series adapter panels. It is supplied with all hardware necessary to route the fibers and secure cables.
The FCW12SP cabinet provides for a maximum of 12 FSP series adapter panels. It is supplied with all the hardware necessary to route the fibers and secure cables.

  Features:
- Separate, lockable user and installer-side compartments - tamper-resistant
  Cable entry ports designed for stackable wall mounting - additional capacity as desired
- Accepts Hubbell splice trays
- Hubbell Label System compatible for enhanced label identification
- FCW4SP accepts 7” splice trays
- FCW12SP accepts 7” and 10” splice trays
 
Specifications:
- 16 ga. cold rolled steel construction
- Durable black powder coat finish
- Weight (unloaded) - FCW4SP: 12 lbs. FCW12SP: 21 lbs.
- The FCW4SP accepts a maximum of two 7” splice trays
- The FCW12SP accepts a maximum of four 10” splice trays


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OPTIchannel 2-door FCW series are designed for applications that require interconnections, cable management and routing of fiber in a secure environment. Cabinets come equipped with a lock on the installer-side to prevent unauthorized access to terminations.

Cable entry ports are aligned on the top and bottom of each cabinet. This allows stackable mounting, so cables can be easily run from one cabinet to the next. FCW series cabinets are available in two sizes. Adapter Panels are sold separately.

The FCW4SP cabinet provides for a maximum of 4 FSP series adapter panels. It is supplied with all hardware necessary to route the fibers and secure cables.
The FCW12SP cabinet provides for a maximum of 12 FSP series adapter panels. It is supplied with all the hardware necessary to route the fibers and secure cables.

  Features:
- Separate, lockable user and installer-side compartments - tamper-resistant
  Cable entry ports designed for stackable wall mounting - additional capacity as desired
- Accepts Hubbell splice trays
- Hubbell Label System compatible for enhanced label identification
- FCW4SP accepts 7” splice trays
- FCW12SP accepts 7” and 10” splice trays
 
Specifications:
- 16 ga. cold rolled steel construction
- Durable black powder coat finish
- Weight (unloaded) - FCW4SP: 12 lbs. FCW12SP: 21 lbs.
- The FCW4SP accepts a maximum of two 7” splice trays
- The FCW12SP accepts a maximum of four 10” splice trays


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OPTIchannel 2-door FCW series are designed for applications that require interconnections, cable management and routing of fiber in a secure environment. Cabinets come equipped with a lock on the installer-side to prevent unauthorized access to terminations.

Cable entry ports are aligned on the top and bottom of each cabinet. This allows stackable mounting, so cables can be easily run from one cabinet to the next. FCW series cabinets are available in two sizes. Adapter Panels are sold separately.

The FCW4SP cabinet provides for a maximum of 4 FSP series adapter panels. It is supplied with all hardware necessary to route the fibers and secure cables.
The FCW12SP cabinet provides for a maximum of 12 FSP series adapter panels. It is supplied with all the hardware necessary to route the fibers and secure cables.

  Features:
- Separate, lockable user and installer-side compartments - tamper-resistant
  Cable entry ports designed for stackable wall mounting - additional capacity as desired
- Accepts Hubbell splice trays
- Hubbell Label System compatible for enhanced label identification
- FCW4SP accepts 7” splice trays
- FCW12SP accepts 7” and 10” splice trays
 
Specifications:
- 16 ga. cold rolled steel construction
- Durable black powder coat finish
- Weight (unloaded) - FCW4SP: 12 lbs. FCW12SP: 21 lbs.
- The FCW4SP accepts a maximum of two 7” splice trays
- The FCW12SP accepts a maximum of four 10” splice trays


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Modular FSP-series adapter panels are available in LC, SC, ST, FC, and ST/SC hybrid models. Various port densities, phosphor bronze or ceramic offer a wide range of solutions. Ceramic is universal for singlemode or multimode. Phosphor bronze for multimode only.

Jack Pack™ keystone 6-port FSP panels accept any Hubbell SF- or SFF-series snap-fit connectors.

  Features:
- Industry standard dimensions, with snap-in/quick-release fasteners.
- Wide range of colors to support fiber-specific applications, including OM1, OM2, OM3, OS2, and APC singlemode.
- Precision TIA-604 compliant components
- Green ceramic versions available for APC

xx = Color: AQ (Aqua), BE (Beige), BK (Black), B (Blue), GN (Green), OR (Orange), R (Red), and Y (Yellow).xx = Color: AQ (Aqua), BE (Beige), BK (Black), B (Blue), GN (Green), OR (Orange), R (Red), and Y (Yellow).

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Modular FSP-series adapter panels are available in LC, SC, ST, FC, and ST/SC hybrid models. Various port densities, phosphor bronze or ceramic offer a wide range of solutions. Ceramic is universal for singlemode or multimode. Phosphor bronze for multimode only.

Jack Pack™ keystone 6-port FSP panels accept any Hubbell SF- or SFF-series snap-fit connectors.

  Features:
- Industry standard dimensions, with snap-in/quick-release fasteners.
- Wide range of colors to support fiber-specific applications, including OM1, OM2, OM3, OS2, and APC singlemode.
- Precision TIA-604 compliant components
- Green ceramic versions available for APC

xx = Color: AQ (Aqua), BE (Beige), BK (Black), B (Blue), GN (Green), OR (Orange), R (Red), and Y (Yellow).xx = Color: AQ (Aqua), BE (Beige), BK (Black), B (Blue), GN (Green), OR (Orange), R (Red), and Y (Yellow).

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
  Compact, rugged design
  Optional locking feature on front cover
  Extended front cover for patch cord protection
  Cable management hardware and labels included
  Specifications:
- Material: 16 ga. Cold rolled steel
- Finish Durable black powder coat


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
  Compact, rugged design
  Optional locking feature on front cover
  Extended front cover for patch cord protection
  Cable management hardware and labels included
  Specifications:
- Material: 16 ga. Cold rolled steel
- Finish Durable black powder coat


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Features:
  Compact, rugged design
  Optional locking feature on front cover
  Extended front cover for patch cord protection
  Cable management hardware and labels included
  Specifications:
- Material: 16 ga. Cold rolled steel
- Finish Durable black powder coat


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.

Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1 minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber mating inside the splice element.

  Precision Low Loss, High Yield Pre-Polished Connector
  Terminate in Less than 60 Seconds
  CSI Specifications, Drawings and Advanced Termination Tips Available
  RoHS Compliant and Bulk Packed in Recyclable Cartons

 
Specifications
- Insertion loss: 0.5dB (0.35dB typical), 0.75dB max
- Singlemode return loss: 55dB Typ, 40dB minimum
- Multimode return loss: 35dB Typ, 22dB minimum
- Operating temperature range: 0 ºC to +70 ºC
- Mating durability: 500 cycles <0.1dB change
- Ferrule: zirconia ceramic, UPC polish


Reviews

Write a review | No reviews for this product.
"Hubbell OFPLK813A Complete tester kit, Multimode"

Hubbell OFPLK813A Complete tester kit, Multimode

 
SKU: OFPLK813A
Your Price: $1,275.00
 
 
  • Details
  • Reviews

Includes: 1 power meter, 1 dual wavelength LED source, 1 soft pouch, batteries

Reviews

Write a review | No reviews for this product.
Hubbell OFPM813 Power meter dual wavelength

Hubbell OFPM813 Power meter dual wavelength

 
SKU: OFPM813
Your Price: $805.00
 
 
  • Details
  • Reviews

Hubbell OFPM813 Power meter dual wavelength

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell OFLS813 LED light source dual wavelength, multimode

Reviews

Write a review | No reviews for this product.
Hubbell OFSTRIP Fiber Strip Tool

Hubbell OFSTRIP Fiber Strip Tool

 
SKU: OFSTRIP
Your Price: $61.15
 
 
  • Details
  • Reviews

Hubbell OFSTRIP Fiber Strip Tool

Reviews

Write a review | No reviews for this product.
Hubbell OFSTRIP2 Universal Fiber Strip Tool

Hubbell OFSTRIP2 Universal Fiber Strip Tool

 
SKU: OFSTRIP2
Your Price: $35.35
 
 
  • Details
  • Reviews

Hubbell OFSTRIP2 Universal Fiber Strip Tool

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell provides tools and testers to simplify 2CLICK® fiber installations. The OFTP05 tool pouch contains fiber preparation tools for 2CLICK®
non-adhesive terminations only.

- Cleave tool allows for variable cleave lengths from 5 to 20mm.
- Cleave tool blade can execute thousands of cleaves before blade replacement is necessary

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell provides tools and testers to simplify 2CLICK® fiber installations. The OFTP05 tool pouch contains fiber preparation tools for 2CLICK®
non-adhesive terminations only.

- Cleave tool allows for variable cleave lengths from 5 to 20mm.
- Cleave tool blade can execute thousands of cleaves before blade replacement is necessary

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

FOCIS WiFi combines the proven fiber connector inspection and analysis capabilities of our award-winning FOCIS and FOCIS PRO systems with the familiar, powerful and easy-to-use capabilities of a smartphone or tablet. No matter where your work takes you FOCIS WiFi is as mobile, agile and connected as you are.

Three different FOCIS WiFi systems are available.

- FOCIS WiFi PRO - enables users to automatically analyze connector integrity according to IEC 61300-3-35, AT&T TP-76461 or user defined standards and save, recall and share results via email, text or mobile cloud applications

FOCIS MOBILE is a free companion application that users download from Google Play or the App Store to a smartphone or tablet. This application enables users to connect to and control the FOCIS WiFi system, to define system settings and user preferences and to use the smartphone or tablet to view, store and share images and test results as permitted by the system purchased.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

FOCIS WiFi combines the proven fiber connector inspection and analysis capabilities of our award-winning FOCIS and FOCIS PRO systems with the familiar, powerful and easy-to-use capabilities of a smartphone or tablet. No matter where your work takes you FOCIS WiFi is as mobile, agile and connected as you are.

Three different FOCIS WiFi systems are available.

- FOCIS WiFi VIEW - enables users to view live images of a fiber endface on their smartphone or tablet

FOCIS MOBILE is a free companion application that users download from Google Play or the App Store to a smartphone or tablet. This application enables users to connect to and control the FOCIS WiFi system, to define system settings and user preferences and to use the smartphone or tablet to view, store and share images and test results as permitted by the system purchased.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

FOCIS WiFi combines the proven fiber connector inspection and analysis capabilities of our award-winning FOCIS and FOCIS PRO systems with the familiar, powerful and easy-to-use capabilities of a smartphone or tablet. No matter where your work takes you FOCIS WiFi is as mobile, agile and connected as you are.

Three different FOCIS WiFi systems are available.

- FOCIS WiFi PRO - enables users to automatically analyze connector integrity according to IEC 61300-3-35, AT&T TP-76461 or user defined standards and save, recall and share results via email, text or mobile cloud applications

FOCIS MOBILE is a free companion application that users download from Google Play or the App Store to a smartphone or tablet. This application enables users to connect to and control the FOCIS WiFi system, to define system settings and user preferences and to use the smartphone or tablet to view, store and share images and test results as permitted by the system purchased.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

FOCIS WiFi combines the proven fiber connector inspection and analysis capabilities of our award-winning FOCIS and FOCIS PRO systems with the familiar, powerful and easy-to-use capabilities of a smartphone or tablet. No matter where your work takes you FOCIS WiFi is as mobile, agile and connected as you are.

Three different FOCIS WiFi systems are available.

- FOCIS WiFi VIEW - enables users to view live images of a fiber endface on their smartphone or tablet

FOCIS MOBILE is a free companion application that users download from Google Play or the App Store to a smartphone or tablet. This application enables users to connect to and control the FOCIS WiFi system, to define system settings and user preferences and to use the smartphone or tablet to view, store and share images and test results as permitted by the system purchased.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The FOCIS PRO Touchscreen Tablet is a purpose-built Windows® computer equipped with AFL’s powerful SimpleView PRO analysis software. Capable of centering a fiber image, identifying critical core, cladding, adhesive and contact zones and detection of and tallying the types fo defects found, this software analyzes a typical fiber in under 5 seconds. Its bright, crisp display provides detailed images and its Zoom/PPan feature allows users to identify the smallest particles, scratches and imperfections. Its portrait orientation makes it easy to hold and operated with just one hand. Unique to all FOCIS products is a patent-pending feature, which simplifies before/after, jumper/bulkhead, insput/output, near/far and other common fiber cleanliness comparisons. Additional features include image capture and store/recall. Up to 1000 fiber images may be stored in on-board memory and images may be transferred via any off-the-shelf USB memory stick or SD flash card. The DFD1 incorporates a proven shock-absorbing rubber boot that doubles as a tilt stand and hanger.

The FOCIS PRO Digital FiberScope is a high resolution video inspection probe. It is equipped with a focusing knob and image capture button. An extensive assortment of adapter tips allow it to be used with all types of fiber connector ferrules and bulkhead connectors. Bulkhead tips are available in multiple lengths as well as straight and 60° angle. Connector adapters are available in PL/UPC, APC polished ferrule in 1.25 mm, 2.5 mm and MPO connectors.

NOYES FOCIS PRO solutions are packaged in a protective hard carry case that keeps all vital analysis, inspection and cleaning accessories close at hand and ready to go to work.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The FOCIS PRO Touchscreen Tablet is a purpose-built Windows® computer equipped with AFL’s powerful SimpleView PRO analysis software. Capable of centering a fiber image, identifying critical core, cladding, adhesive and contact zones and detection of and tallying the types fo defects found, this software analyzes a typical fiber in under 5 seconds. Its bright, crisp display provides detailed images and its Zoom/PPan feature allows users to identify the smallest particles, scratches and imperfections. Its portrait orientation makes it easy to hold and operated with just one hand. Unique to all FOCIS products is a patent-pending feature, which simplifies before/after, jumper/bulkhead, insput/output, near/far and other common fiber cleanliness comparisons. Additional features include image capture and store/recall. Up to 1000 fiber images may be stored in on-board memory and images may be transferred via any off-the-shelf USB memory stick or SD flash card. The DFD1 incorporates a proven shock-absorbing rubber boot that doubles as a tilt stand and hanger.

The FOCIS PRO Digital FiberScope is a high resolution video inspection probe. It is equipped with a focusing knob and image capture button. An extensive assortment of adapter tips allow it to be used with all types of fiber connector ferrules and bulkhead connectors. Bulkhead tips are available in multiple lengths as well as straight and 60° angle. Connector adapters are available in PL/UPC, APC polished ferrule in 1.25 mm, 2.5 mm and MPO connectors.

NOYES FOCIS PRO solutions are packaged in a protective hard carry case that keeps all vital analysis, inspection and cleaning accessories close at hand and ready to go to work.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The FOCIS PRO Touchscreen Tablet is a purpose-built Windows® computer equipped with AFL’s powerful SimpleView PRO analysis software. Capable of centering a fiber image, identifying critical core, cladding, adhesive and contact zones and detection of and tallying the types fo defects found, this software analyzes a typical fiber in under 5 seconds. Its bright, crisp display provides detailed images and its Zoom/PPan feature allows users to identify the smallest particles, scratches and imperfections. Its portrait orientation makes it easy to hold and operated with just one hand. Unique to all FOCIS products is a patent-pending feature, which simplifies before/after, jumper/bulkhead, insput/output, near/far and other common fiber cleanliness comparisons. Additional features include image capture and store/recall. Up to 1000 fiber images may be stored in on-board memory and images may be transferred via any off-the-shelf USB memory stick or SD flash card. The DFD1 incorporates a proven shock-absorbing rubber boot that doubles as a tilt stand and hanger.

The FOCIS PRO Digital FiberScope is a high resolution video inspection probe. It is equipped with a focusing knob and image capture button. An extensive assortment of adapter tips allow it to be used with all types of fiber connector ferrules and bulkhead connectors. Bulkhead tips are available in multiple lengths as well as straight and 60° angle. Connector adapters are available in PL/UPC, APC polished ferrule in 1.25 mm, 2.5 mm and MPO connectors.

NOYES FOCIS PRO solutions are packaged in a protective hard carry case that keeps all vital analysis, inspection and cleaning accessories close at hand and ready to go to work.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The FOCIS PRO Touchscreen Tablet is a purpose-built Windows® computer equipped with AFL’s powerful SimpleView PRO analysis software. Capable of centering a fiber image, identifying critical core, cladding, adhesive and contact zones and detection of and tallying the types fo defects found, this software analyzes a typical fiber in under 5 seconds. Its bright, crisp display provides detailed images and its Zoom/PPan feature allows users to identify the smallest particles, scratches and imperfections. Its portrait orientation makes it easy to hold and operated with just one hand. Unique to all FOCIS products is a patent-pending feature, which simplifies before/after, jumper/bulkhead, insput/output, near/far and other common fiber cleanliness comparisons. Additional features include image capture and store/recall. Up to 1000 fiber images may be stored in on-board memory and images may be transferred via any off-the-shelf USB memory stick or SD flash card. The DFD1 incorporates a proven shock-absorbing rubber boot that doubles as a tilt stand and hanger.

The FOCIS PRO Digital FiberScope is a high resolution video inspection probe. It is equipped with a focusing knob and image capture button. An extensive assortment of adapter tips allow it to be used with all types of fiber connector ferrules and bulkhead connectors. Bulkhead tips are available in multiple lengths as well as straight and 60° angle. Connector adapters are available in PL/UPC, APC polished ferrule in 1.25 mm, 2.5 mm and MPO connectors.

NOYES FOCIS PRO solutions are packaged in a protective hard carry case that keeps all vital analysis, inspection and cleaning accessories close at hand and ready to go to work.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.

- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame
- UL Listed 1863 - Communication Circuit Accessory and CSA Certified

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Hubbell IDF32 RE-BOX® – Commercial Equipment Cabinet, 32”H x 24.2”W x 10”D, Light Gray

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Contents: assembled side-hinged wall bracket Rack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
"Leviton 5F100-PLT Plate (black), Blank"

Leviton 5F100-PLT Plate (black), Blank

 
SKU: 5F100-PLT
Your Price: $4.55
 
 
  • Details
  • Reviews
  • PDF's

- Integrated LC and SC plates (two pieces) eliminates rattling and loose fit
- Adapter plates use zirconia ceramic sleeves for optimal performance in 1 Gbps and higher transmission speeds
- LC and SC plates offered in standard fiber type colors
- Adapter plates offered in LC, SC, ST, and blank styles
- Captive push-lock pins allow for quick tool-less installation
- Compatible with all Opt-X panels and enclosures (rack- or wall-mount)

Reviews

Write a review | No reviews for this product.

Product PDF's
 
  • Details
  • Reviews
  • Video

Accurately finds cable length, impediments in the cable and conditions at the end of every wire in your data, power, or communications/video system up to 3,000 ft. With the complexity of today’s electrical, data, voice and video signal carrying systems, you need a tool that is fast, accurate and easy to use to see down the wire and show the exact conditions that exist. Snap Shot™ is that tool. Made in America with American technology, Snap Shot™ is the new 21st century tool for testing every type of cable in any industry. Advanced Spread Spectrum TDR technology works in all wire environments and is immune to voltage, current, or data stream disruptions. See the true picture of your wiring and cable systems with Snap Shot™ today.


  Features
- Works on energized cables
- Finds cable length or distance to fault from one end
- Measures cable distance on spool
- Accuracy of 1% or better
- Calibrates NVP values
- Internal memory for storing most used NVP values
- Large backlit LCD display
- Built-in tone generator for cable tracing & identification
- Loop test for continuous testing
- Displays length reading in feet or meters
- Auto-off to preserve battery life


Memory
Holds up to two different NVP values for multiple cable tests.
  Calibration
Ability to calibrate NVP for any cable
  Test
Tests length, opens or shorts present on the cable, up to 3,000ft.
  Tone Generation
Produces four different tones for locating cables


Physical Dimensions
Size: 17.3 x 8.0 x 3.3 cm (6.8 x 3.15 x 1.3 inches)
Weight: 340 grams (12.0 oz.) With battery
Input Protection
To 400 volts peak 50/60 Hz AC or DC
Voltage Warning
At maximum of Safety Extra Low Voltage limits (60V peak AC or DC)
- Measurement continues while warning is displayed
Measurement Method
Spread Spectrum Time Domain Reflectometry (SSTDR) NVP (VOP) Range 20.0 to 99.9%
NVP Accuracy Range
± 1% with known NVP and consistent cable parameters
Maximum Length
3,000 ft on cables with low attenuation
Common Cable
Length Ranges
- Coaxial Cable - 0 to 2,000 feet
- Data Cable - 0 to 1,500 feet
- Electrical Cable - 0 to 1,000 feet
Tone Generation
4 selectable tone cadences centered on 1 kHz
- Constant output amplitude of 3 Vp-p
Power
4 AA alkaline batteries
- Standby: 4 years
- Active: 15 hours average
Battery Low Level
Approximately 4 volts
Operating Environment
- Operating temperature: 0 to 50°C (32 to 122°F)
- Storage temperature: -20 to 60°C (-4 to 140°F)
- Humidity: 10% to 90%, non-condensing
- Altitude: 3,050 meters (10,000ft) maximum
Compliance
Complies with Conformité European directives.

Reviews

Write a review | No reviews for this product.

Video
 
  • Details
  • Reviews

FastCAM Tool Kit w/ LYNX cleaver, work tray and gooseneck LED

Reviews

Write a review | No reviews for this product.
type-q101-a

TYPE Q101M12 Quantum Compact Mass Fusion Splicer Kit

 
SKU: TYPE-Q101-M12-KIT-6RM2
Your Price: $16,140.00
 
 
  • Details
  • Reviews
  • PDF's

The Quantum Mass marks the new standard in fusion splicing. It is the industry’s first and ONLY mass fusion splicer with Automatic Clamp Force Adjustment and Live Time Clamp Force Calibration that allows for real-time fiber offset adjustment for the lowest insertion loss for splicing ribbon fiber and MPO terminations. It’s the industry’s fastest mass fusion splicer, taking less than 70 seconds for a 12 count fiber splice. Other industry first and ONLY features include: fully navigational touch screen for optimum user friendliness; SD port for virtually unlimited data storage, plus video, audio, and software uploads and downloads; internet interface for remote maintenance; and the longest electrode life – with legendary reliability common to all Sumitomo splicers.

Sumitomo’s Quantum Mass is the industry’s lightest, smallest, and most advanced mass fusion splicer, yet it’s also more rugged with superior dust, shock and water-proof resistance for even the harshest environments. The built-in dual heater system, a Sumitomo Electric innovation, reduces heater wait time and improves splicing efficiency by 70%, yielding a splicer with unprecedented speed, performance, and reliability.

Reviews

Write a review | No reviews for this product.
type-q101-a

TYPE Q101M12 Quantum Compact Mass Fusion Splicer Kit 8RM2

 
SKU: TYPE-Q101-M12-KIT-8RM2
Your Price: $16,545.00
 
 
  • Details
  • Reviews
  • PDF's

The Quantum Mass marks the new standard in fusion splicing. It is the industry’s first and ONLY mass fusion splicer with Automatic Clamp Force Adjustment and Live Time Clamp Force Calibration that allows for real-time fiber offset adjustment for the lowest insertion loss for splicing ribbon fiber and MPO terminations. It’s the industry’s fastest mass fusion splicer, taking less than 70 seconds for a 12 count fiber splice. Other industry first and ONLY features include: fully navigational touch screen for optimum user friendliness; SD port for virtually unlimited data storage, plus video, audio, and software uploads and downloads; internet interface for remote maintenance; and the longest electrode life – with legendary reliability common to all Sumitomo splicers.

Sumitomo’s Quantum Mass is the industry’s lightest, smallest, and most advanced mass fusion splicer, yet it’s also more rugged with superior dust, shock and water-proof resistance for even the harshest environments. The built-in dual heater system, a Sumitomo Electric innovation, reduces heater wait time and improves splicing efficiency by 70%, yielding a splicer with unprecedented speed, performance, and reliability.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews
  • Related Items
  • Video
  • PDF's

The FOCIS WiFi PRO system combines AFL’s powerful fiber connector inspection and analysis with the familiar ease of a smart device. FOCIS WiFi PRO works the way you do – connected to your phone or tablet. FOCIS WiFi PRO enables mobile workers to complete remote fiber optic connector inspection tasks while remaining connected to coworkers and managers.

FOCIS WiFi PRO automatically analyzes connector integrity according to IEC 61300-3-35, AT&T TP-76461, or user defined standards and save, recall and share results via email, text or mobile cloud applications.

The FOCIS WiFi system consists of the proven DFS1 Digital FiberScope and a Portable Application Link WiFi unit. It also includes AFL FOCIS application software available for iPhone and IPad as well as Android smart devices. The AFL FOCIS application software enables users to view live images on their smart devices, save, recall and share saved end-face images via e-mail, text of text attachment and mobile cloud applications like Dropbox and Google Drive.

Test reports including saved inspection results may be generated using TRM 2.0 Test Results Manager software supplied with each FOCIS WiFi Kit

Reviews

Write a review | No reviews for this product.

Other items you may be interested in:

AFL FMPR-00-04XA FOCIS WiFi PRO 2.5 mm, SC/APC, FC/APC

SKU: FMPR-00-04XA
Our Price: $1,870.00
In stock products ship same day

AFL FMPR-00-04XM FOCIS WiFi MTP/PC, MTP/APC

SKU: FMPR-00-04XM
Our Price: $2,215.00
In stock products ship same day

Video
 
  • Details
  • Reviews
  • Video
  • PDF's

The FOCIS WiFi PRO system combines AFL’s powerful fiber connector inspection and analysis with the familiar ease of a smart device. FOCIS WiFi PRO works the way you do – connected to your phone or tablet. FOCIS WiFi PRO enables mobile workers to complete remote fiber optic connector inspection tasks while remaining connected to coworkers and managers.

FOCIS WiFi PRO automatically analyzes connector integrity according to IEC 61300-3-35, AT&T TP-76461, or user defined standards and save, recall and share results via email, text or mobile cloud applications.

The FOCIS WiFi system consists of the proven DFS1 Digital FiberScope and a Portable Application Link WiFi unit. It also includes AFL FOCIS application software available for iPhone and IPad as well as Android smart devices. The AFL FOCIS application software enables users to view live images on their smart devices, save, recall and share saved end-face images via e-mail, text of text attachment and mobile cloud applications like Dropbox and Google Drive.

Test reports including saved inspection results may be generated using TRM 2.0 Test Results Manager software supplied with each FOCIS WiFi Kit

Reviews

Write a review | No reviews for this product.

Video

AFL FMPR-00-04XM FOCIS WiFi MTP/PC, MTP/APC

 
SKU: FMPR-00-04XM
Your Price: $2,215.00
 
 
  • Details
  • Reviews
  • Video
  • PDF's

The FOCIS WiFi PRO system combines AFL’s powerful fiber connector inspection and analysis with the familiar ease of a smart device. FOCIS WiFi PRO works the way you do – connected to your phone or tablet. FOCIS WiFi PRO enables mobile workers to complete remote fiber optic connector inspection tasks while remaining connected to coworkers and managers.

FOCIS WiFi PRO automatically analyzes connector integrity according to IEC 61300-3-35, AT&T TP-76461, or user defined standards and save, recall and share results via email, text or mobile cloud applications.

The FOCIS WiFi system consists of the proven DFS1 Digital FiberScope and a Portable Application Link WiFi unit. It also includes AFL FOCIS application software available for iPhone and IPad as well as Android smart devices. The AFL FOCIS application software enables users to view live images on their smart devices, save, recall and share saved end-face images via e-mail, text of text attachment and mobile cloud applications like Dropbox and Google Drive.

Test reports including saved inspection results may be generated using TRM 2.0 Test Results Manager software supplied with each FOCIS WiFi Kit

Reviews

Write a review | No reviews for this product.

Video

AFL M310-25U-01 M310 Enterprise OTDR

 
SKU: M310-25U-01
Your Price: $8,995.00
 
 
  • Details
  • Reviews
  • PDF's

Rugged, lightweight and easy to hold, the M310 has a Touch and Test user interface that makes it easy for experts and novices to test and document fiber networks accurately and quickly. TruEvent technology enables M310 to provide superior event analysis capability for user to verify and troubleshoot even the most complex fiber network. LinkMap visualizes test results for easy and quick interpretation. With dynamic range up to 38 dB, and 16 hour battery run time, M310 provides complete Tier 1 insertion loss and Tier 2 OTDR testing. Using pre-set Industry ISO/TIA standards or user set Pass/Fail thresholds, technicians are alerted to installation problems and failures in easy-to-interpret event table. Pass/Fail event table and trace are displayed on the same screen for easy correlation.

Reviews

Write a review | No reviews for this product.

Product PDF's
M310 Enterprise OTDR PDF's:
Specifications
 
  • Details
  • Reviews
  • PDF's

Rugged, lightweight and easy to hold, the M310 has a Touch and Test user interface that makes it easy for experts and novices to test and document fiber networks accurately and quickly. TruEvent technology enables M310 to provide superior event analysis capability for user to verify and troubleshoot even the most complex fiber network. LinkMap visualizes test results for easy and quick interpretation. With dynamic range up to 38 dB, and 16 hour battery run time, M310 provides complete Tier 1 insertion loss and Tier 2 OTDR testing. Using pre-set Industry ISO/TIA standards or user set Pass/Fail thresholds, technicians are alerted to installation problems and failures in easy-to-interpret event table. Pass/Fail event table and trace are displayed on the same screen for easy correlation.

Reviews

Write a review | No reviews for this product.

Product PDF's
M310 Enterprise OTDR PDF's:
Specifications
 
  • Details
  • Reviews

Red Multimode Fiber Mandrel for 50 µm fiber with 3 mm jackets

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Gray Multimode Fiber Mandrel for 62.5 µm fiber with 3 mm jackets

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CableIQ Remote Identifier Kit

Remote identifier numbers 2-4

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CableIQ RJ45/11 Modular Adapter

Reviews

Write a review | No reviews for this product.

AFL 8800-00-0221 E-2000 screw-on adapter cap

 
SKU: 8800-00-0221
Your Price: $205.00
 
 
  • Details
  • Reviews

E-2000 screw-on adapter cap

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

12" Flexible Fish Tape Leader

Reviews

Write a review | No reviews for this product.

ADC FTL-PS ADC TracerLight power source

 
SKU: FTL-PS
Your Price: $65.00
 
 
  • Details
  • Reviews

The compact power source is comprised of a lightweight, plastic flashlight body featuring two AA batteries and a printed circuit board (PCB). It provides approximately 80 hours of continuous service and features 1-hour auto-off. The end of battery life is indicated by a slowing of the blink rate.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

110 Style EZ-Data Cut Blade Replacement Knives, 3 Pack

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews
  • Video

This economical tool has been specifically designed to strip the cable jackets from Category 5 and 5e twisted pair cables. No adjustments are required and will not nick the inner conductors. Durable high impact plastic housing is molded from yellow plastic to make it easier to locate. Long life blade.

  Features:
- Designed for stripping the cable jacket on Category 5, 5e cables.
- No adjustments required.
- Will not nick inner conduct

Reviews

Write a review | No reviews for this product.

Video
 
  • Details
  • Reviews

  Product Features:
- State of the art 18V 3.0 Ah lithium ion battery power reduces cycle time and provides 70% more cycles per charge.
- Automatic retraction when crimping and cutting cycles are complete.
- Exclusive to Greenlee! The ECCXL and E12CCXL tools have a repeating retraction stop (RSR). On the first crimp, the operator can stop the retractionat any point, and then on subsequent crimp cycles the ram retracts automatically to the same position.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Lightweight, ergonomic-angled handle provides comfortable, low-stress use and improves tool balance.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Tools are UL and cUL classified with 7 brands of color coded lugs and splices.
- Cycles in seconds with two-speed hydraulic pump, maximizing productivity.
- Uses all optional CCX blades and adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- CRIMPING DIE STYLES: 22 Series, W" Style, T&B® 6-TON, Blackburn® "OD", Kearney® "O", Panduit® "CD2001", (All dies require appropriate adapter)
- Crimping Force: 12,000 lbs. (53 kn)
- Length: 16-1/2" (419 mm)
- Width: 2-7/8" (73 mm)
- Depth: 14-1/2" (368 mm)
- Weight: 14 lbs. (6.3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 300
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- State of the art 18V 3.0 Ah lithium ion battery power reduces cycle time and provides 70% more cycles per charge.
- Automatic retraction when crimping and cutting cycles are complete.
- Exclusive to Greenlee! The ECCXL and E12CCXL tools have a repeating retraction stop (RSR). On the first crimp, the operator can stop the retraction at any point, and then on subsequent crimp cycles the ram retracts automatically to the same position.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Lightweight, ergonomic-angled handle provides comfortable, low-stress use and improves tool balance.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Tools are UL and cUL classified with 7 brands of color coded lugs and splices.
- Cycles in seconds with two-speed hydraulic pump, maximizing productivity.
- Uses all optional CCX blades and adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- CRIMPING DIE STYLES: 22 Series, W" Style, T&B® 6-TON, Blackburn® "OD", Kearney® "O", Panduit® "CD2001", (All dies require appropriate adapter)
- Crimping Force: 12,000 lbs. (53 kn)
- Length: 16-1/2" (419 mm)
- Width: 2-7/8" (73 mm)
- Depth: 14-1/2" (368 mm)
- Weight: 14 lbs. (6.3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 300
  

Reviews

Write a review | No reviews for this product.
Greenlee ECCXL22 Gator Pro Crimp Tool with LI-Bat 230V