Punch-down MAX 5e modules significantly exceed category 5e performance with component and channel performance to 160 MHz*. These modules offer all the functional advantages of our 10G and MAX 6 outlets and feature our S310® punch-down block — making termination quick and easy.

- Featuring universal T568A/B wiring w/component & channel performance to 160 MHz.

Punch-down MAX 5e modules significantly exceed category 5e performance with component and channel performance to 160 MHz*. These modules offer all the functional advantages of our 10G and MAX 6 outlets and feature our S310® punch-down block — making termination quick and easy.

- Featuring universal T568A/B wiring w/component & channel performance to 160 MHz.

Punch-down MAX 5e modules significantly exceed category 5e performance with component and channel performance to 160 MHz*. These modules offer all the functional advantages of our 10G and MAX 6 outlets and feature our S310® punch-down block — making termination quick and easy.

- Featuring universal T568A/B wiring w/component & channel performance to 160 MHz.

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants

The MAX 6 module provides performance far exceeding category 6 connecting hardware performance specifications. It also insures backwards compatibility with components and systems of lower performing categories.

Installers and end users benefit from other rich features incorporated into the MAX 6 module. It’s compact design is ideal for high density applications. Up to six modules can be utilized in a single gang faceplate and twelve modules in double gang faceplate. Also, the angled MAX 6 modules provide a gravity feed, low-profile design for the work area improving patch cord management in installations where clearance is at a minimum.

The flat MAX 6 modules are just as versatile ­ perfect for flush mount applications or with MAX series patch panels or surface mount (SM®) boxes. This solution makes it possible to configure a wide variety of mixed media solutions.

- Compliant with the category 6 component, permanent link and channel requirements of ANSI/TIA-568 C.2 Compliant with the category 6 component and class E permanent link and channel requirements of ISO/IEC 11801 Ed2:2002
- Compatible with both T568A and T568B wiring options
- Flexible: Can be installed from front or rear of faceplate
- Rear protective strain relief caps with side or rear entry can be installed onto cable before or after termination
- Slim design allows jacks to be side-stackable to provide high-density solutions
- Uses standard 110 single position termination tool
- Protective doors are available to minimize exposure to dust and other contaminants