Page 12 - Datacomtools 2014 Catalog
P. 12
k Mount Kits, 6-110 and Cat 5e
Rack Mount Kits, 6-110, Category 6 Simplified ordering of a complete Category 6 or 5e, EIA 19” Features:
rack mount 110 cross connect field is facilitated by the - Unique third hand locating pins hold panel in
use of Hubbell’s rack mount 110 Field Termination Kits.
6-110 and 110 Rack Mount Kits provide a reliable, place on rack while installing screws.
cost-effective, front terminated solution to manage - Optional rear cable organizer (HC36WF)
communications equipment wiring in the
telecommunications room when front termination is clips to the rear of the panel.
desired over the modularity of a patch panel. Rear cable - Rolled edge construction provides superior
access holes and increased channel width on wiring
blocks allows jacketed cable to be routed from behind strength during termination.
the wiring block close to termination helping to maintain - Increased Pair Isolation on 6-110 wiring
proper pair twist.
and connecting blocks provides for superior
NEXT performance.
- Compatible with Hubbell Labeling Software
and laser-printable 110 paper label sheets.
6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s
high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed
Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and
voice applications.
Rack Mount Kits, 110, with Cable Rack Mount Kits, 6-110, Category 6
Management, Category 5e 6110RM1 Rack mount kit with troughs, 6-110, 128-pair 3U $158.65
6110RM1NT Rack mount kit w/o troughs, 6-110, 128-pair 2U $140.00
Rack Mount Kits, 110, without Cable Rack Mount Kits, 110, with Cable Management, Category 5e $81.95
Management, Category 5e 110RM14 Rack mount kit, 100-pair with 4-pair connecting blocks 2U $81.95
110RM15 Rack mount kit, 100-pair with 5-pair connecting blocks 2U $103.75
110RM24 Rack mount kit, 200-pair with 4-pair connecting blocks 3U $103.75
110RM25 Rack mount kit, 200-pair with 5-pair connecting blocks 3U $63.60
Rack Mount Kits, 110, without Cable Management, Category 5e $63.60
110RM14NT Rack mount kit, 100-pair with 4-pair connecting blocks 1U $86.95
110RM15NT Rack mount kit, 100-pair with 5-pair connecting blocks 1U $86.95
110RM24NT Rack mount kit, 200-pair with 4-pair connecting blocks 2U
110RM25NT Rack mount kit, 200-pair with 5-pair connecting blocks 2U
Cross Connect System, 6-110 Hubbell brings connectivity to the next generation of Features:
performance with our NEXTSPEED® 6-110 Cross Connect - Cable access holes and increased channel
12 System. A high-performance wiring block system that
completes our NEXTSPEED® Category 6 and width allows jacketed cable to be close to
Datacomtools.com TM NEXTSPEED® Ascent 10GbE Channel Solution by termination helping to maintain proper twist.
managing communications equipment wiring in the - Cat 6 field terminated patch plugs allow
telecommunications room and main distribution frames or custom length patch cords to be assembled
as a consolidation point. in the field by utilizing a labor savings snap
Designed to support Category 6 and 10GbE cabling fit design.
applications, Hubbell’s NS6-110 cross connect provides - High-definition color coding tip and ring
a reliable, cost-effective, front terminated solution using a identification make placement easy.
minimum amount of space. - Versatile solution consisting of 64- and 192-
wiring blocks, 4-pair connecting blocks, field
termination kits.
Field Termination Kits, 6-110
Field termination kits facilitate easy ordering and include everything needed to assemble and configure a
complete 6-110 Category 6 cross connect field. Field Termination kits are available with 64- or 192-pair wiring
blocks and appropriate number of 4-pair connect- ing blocks and port identification labeling.
Termination Tool, 6-110/4-Pair
This termination tool is designed to seat 6-110/4-pair connecting blocks and terminate/cut UTP cable on
6-110 wiring blocks.
Connecting Blocks, 6-110/4-pair
Hubbell Category 6, 4-pair connecting blocks are terminated to the wiring blocks utilizing a Hubbell 6-110/4-
pair impact tool. Each connecting block features high definition color coding, tip and ring markings, and
angled IDC towers to make conductor placement and lacing easy.
Field Termination Kits, 6-110
6110FTK64WL 6-110/64-pair with standoff legs $43.95
6110FTK64NL 6-110/64-pair without standoff legs $41.85
6110FTK192WL 6-110/192-pair with standoff legs $140.00
Termination Tool, 6-110/4-Pair $298.00
6110MPPDT Termination tool, 4-pair, 6-110 (includes head and blades) $162.65
6110MPPDT1 Replacement tool head, 6-110 $14.25
Connecting Blocks, 6-110/4-pair
6110CB4PR10 Connecting blocks, 6-110/4-pair
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Rack Mount Kits, 6-110, Category 6 Simplified ordering of a complete Category 6 or 5e, EIA 19” Features:
rack mount 110 cross connect field is facilitated by the - Unique third hand locating pins hold panel in
use of Hubbell’s rack mount 110 Field Termination Kits.
6-110 and 110 Rack Mount Kits provide a reliable, place on rack while installing screws.
cost-effective, front terminated solution to manage - Optional rear cable organizer (HC36WF)
communications equipment wiring in the
telecommunications room when front termination is clips to the rear of the panel.
desired over the modularity of a patch panel. Rear cable - Rolled edge construction provides superior
access holes and increased channel width on wiring
blocks allows jacketed cable to be routed from behind strength during termination.
the wiring block close to termination helping to maintain - Increased Pair Isolation on 6-110 wiring
proper pair twist.
and connecting blocks provides for superior
NEXT performance.
- Compatible with Hubbell Labeling Software
and laser-printable 110 paper label sheets.
6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s
high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed
Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and
voice applications.
Rack Mount Kits, 110, with Cable Rack Mount Kits, 6-110, Category 6
Management, Category 5e 6110RM1 Rack mount kit with troughs, 6-110, 128-pair 3U $158.65
6110RM1NT Rack mount kit w/o troughs, 6-110, 128-pair 2U $140.00
Rack Mount Kits, 110, without Cable Rack Mount Kits, 110, with Cable Management, Category 5e $81.95
Management, Category 5e 110RM14 Rack mount kit, 100-pair with 4-pair connecting blocks 2U $81.95
110RM15 Rack mount kit, 100-pair with 5-pair connecting blocks 2U $103.75
110RM24 Rack mount kit, 200-pair with 4-pair connecting blocks 3U $103.75
110RM25 Rack mount kit, 200-pair with 5-pair connecting blocks 3U $63.60
Rack Mount Kits, 110, without Cable Management, Category 5e $63.60
110RM14NT Rack mount kit, 100-pair with 4-pair connecting blocks 1U $86.95
110RM15NT Rack mount kit, 100-pair with 5-pair connecting blocks 1U $86.95
110RM24NT Rack mount kit, 200-pair with 4-pair connecting blocks 2U
110RM25NT Rack mount kit, 200-pair with 5-pair connecting blocks 2U
Cross Connect System, 6-110 Hubbell brings connectivity to the next generation of Features:
performance with our NEXTSPEED® 6-110 Cross Connect - Cable access holes and increased channel
12 System. A high-performance wiring block system that
completes our NEXTSPEED® Category 6 and width allows jacketed cable to be close to
Datacomtools.com TM NEXTSPEED® Ascent 10GbE Channel Solution by termination helping to maintain proper twist.
managing communications equipment wiring in the - Cat 6 field terminated patch plugs allow
telecommunications room and main distribution frames or custom length patch cords to be assembled
as a consolidation point. in the field by utilizing a labor savings snap
Designed to support Category 6 and 10GbE cabling fit design.
applications, Hubbell’s NS6-110 cross connect provides - High-definition color coding tip and ring
a reliable, cost-effective, front terminated solution using a identification make placement easy.
minimum amount of space. - Versatile solution consisting of 64- and 192-
wiring blocks, 4-pair connecting blocks, field
termination kits.
Field Termination Kits, 6-110
Field termination kits facilitate easy ordering and include everything needed to assemble and configure a
complete 6-110 Category 6 cross connect field. Field Termination kits are available with 64- or 192-pair wiring
blocks and appropriate number of 4-pair connect- ing blocks and port identification labeling.
Termination Tool, 6-110/4-Pair
This termination tool is designed to seat 6-110/4-pair connecting blocks and terminate/cut UTP cable on
6-110 wiring blocks.
Connecting Blocks, 6-110/4-pair
Hubbell Category 6, 4-pair connecting blocks are terminated to the wiring blocks utilizing a Hubbell 6-110/4-
pair impact tool. Each connecting block features high definition color coding, tip and ring markings, and
angled IDC towers to make conductor placement and lacing easy.
Field Termination Kits, 6-110
6110FTK64WL 6-110/64-pair with standoff legs $43.95
6110FTK64NL 6-110/64-pair without standoff legs $41.85
6110FTK192WL 6-110/192-pair with standoff legs $140.00
Termination Tool, 6-110/4-Pair $298.00
6110MPPDT Termination tool, 4-pair, 6-110 (includes head and blades) $162.65
6110MPPDT1 Replacement tool head, 6-110 $14.25
Connecting Blocks, 6-110/4-pair
6110CB4PR10 Connecting blocks, 6-110/4-pair
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
