Page 35 - Datacomtools 2014 Catalog
P. 35
Fiber Optic Cable Tester Fiber Optic Visual Fault Finder
- Simple, versatile, and user-friendly design - Connector Type 1.25mm (LC)
- Rugged, compact, and splash proof aluminum housing - Nominal Wavelength 650nm±10nm
- 650nm laser - Diameter: 1/2”
- High output ≥ 0.5mW - Batteries 2X AAA (not included)
- Continuous wave output mode (CW) for steady illumination - Individual Packing box w/black EVA inner case
- Blinking output mode increases viewing contrast
- Support 2.5mm connect (for PC/FC/SC/ST) Range approx.
- The button switch permits one-handed operation 4km
Specifications: Class 3A laser dicode $89.95 Specifications: Class 3A laser diode
Laser Class 0 ~ +40°C Light Source 0~40°C
Operating Temp. 0 ~ +50°C Temperature Operating Temp.: -20°C~60°C
Storage Temp. 160mm, dia 13.5mm Storage Temp.: 6”
Dimension length Size Length:
902-186 Fiber optic cable tester MT-7509 Fiber optic visual fault finder $92.35
VFF5 Visual Vault Finder VisiFault
The visual fault locator can locate fibers, verifies
The Visual Fault Finder is a light source used to locate break, continuity and polarity, and helps find breaks in cables,
poor mechanical splices and damaged connectors is fiber optic connectors, and splices. Compatible with 2.5mm and
cables. Its perfect to verify continuity, test and find breaks in 1.25mm connector for easy connection.
fiber links, or anywhere fiber optic cables are terminated and - Bright red visible laser light source
subject to mechanical damage - Speeds fiber tracing and identification
- Case survives drops, impacts, & vibrations
VFF5 includes: - Lanyard - 80 hours of battery life w/2 AA batteries
- Carrying Case - Instruction sheets
- Lens Cap
- Batteries
VFF5 VFF5 visual fault finder $278.49 VisiFault VisiFault visual fault finder $341.00
HILite & VFI2 Visual Fault Finders Visual Fault Finder
The HILite and VFI2 are compact but - Continuous wave output mode for steady fault location.
powerful visible red laser designed to - Find breaks to 3km.
troubleshoot faults on fiber optic cables. - Blinking output mode increases viewing contrast.
Light generated by these units will escape - Easy & quick interface fits all 2.5mm connector
from sharp bends and breaks in jacketed interfaces (FC, ST, SC).
or bare fibers, as well as poorly mated - Ergonomic rotary switch permits easy
connectors. They can identify faults in one-handed operation.
fiber optic jumper cables, distribution - Rugged, compact and splash proof
frames, patch panels, and splices trays. aluminum design.
VFI2 Visual fault finder $345.00 170XL Visual fault finder $449.00
HILITE Visual fault finder keychain $265.00 $425.00
$195.00 $480.00
100-200x Inspection Scopes $220.00 FiberViewer Inspection Scope
Leviton’s inspections scopes allow techs to view
multimode and singlemode end-face polished safely Use FiberViewer microscopes to ensure fiber
and reduce change of over polishing (a side effect terminations are smooth and clean. Avoid the
of many coaxial inspection scopes). The 200X scope #1 cause of fiber link failure: dirty
features oblique viewing technology, ergonomic grip, end-faces.
200X magnification and full laser eye protections - Easy, manual focus of precision optics
through wavelength of 850-1550 nanometer. - Factory-tested filters to protect eyes from
harmful light exposure
- Universal adapters allow for inspection of
end faces on many different connector types
- Available in 200x or 400x
49886-SCP 100x inspection scope FT120 FiberViewer 200x inspection scope
49886-FSP 200x inspection scope FT140 FiberViewer 400x inspection scope
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 35
Major Credit Cards Accepted
- Simple, versatile, and user-friendly design - Connector Type 1.25mm (LC)
- Rugged, compact, and splash proof aluminum housing - Nominal Wavelength 650nm±10nm
- 650nm laser - Diameter: 1/2”
- High output ≥ 0.5mW - Batteries 2X AAA (not included)
- Continuous wave output mode (CW) for steady illumination - Individual Packing box w/black EVA inner case
- Blinking output mode increases viewing contrast
- Support 2.5mm connect (for PC/FC/SC/ST) Range approx.
- The button switch permits one-handed operation 4km
Specifications: Class 3A laser dicode $89.95 Specifications: Class 3A laser diode
Laser Class 0 ~ +40°C Light Source 0~40°C
Operating Temp. 0 ~ +50°C Temperature Operating Temp.: -20°C~60°C
Storage Temp. 160mm, dia 13.5mm Storage Temp.: 6”
Dimension length Size Length:
902-186 Fiber optic cable tester MT-7509 Fiber optic visual fault finder $92.35
VFF5 Visual Vault Finder VisiFault
The visual fault locator can locate fibers, verifies
The Visual Fault Finder is a light source used to locate break, continuity and polarity, and helps find breaks in cables,
poor mechanical splices and damaged connectors is fiber optic connectors, and splices. Compatible with 2.5mm and
cables. Its perfect to verify continuity, test and find breaks in 1.25mm connector for easy connection.
fiber links, or anywhere fiber optic cables are terminated and - Bright red visible laser light source
subject to mechanical damage - Speeds fiber tracing and identification
- Case survives drops, impacts, & vibrations
VFF5 includes: - Lanyard - 80 hours of battery life w/2 AA batteries
- Carrying Case - Instruction sheets
- Lens Cap
- Batteries
VFF5 VFF5 visual fault finder $278.49 VisiFault VisiFault visual fault finder $341.00
HILite & VFI2 Visual Fault Finders Visual Fault Finder
The HILite and VFI2 are compact but - Continuous wave output mode for steady fault location.
powerful visible red laser designed to - Find breaks to 3km.
troubleshoot faults on fiber optic cables. - Blinking output mode increases viewing contrast.
Light generated by these units will escape - Easy & quick interface fits all 2.5mm connector
from sharp bends and breaks in jacketed interfaces (FC, ST, SC).
or bare fibers, as well as poorly mated - Ergonomic rotary switch permits easy
connectors. They can identify faults in one-handed operation.
fiber optic jumper cables, distribution - Rugged, compact and splash proof
frames, patch panels, and splices trays. aluminum design.
VFI2 Visual fault finder $345.00 170XL Visual fault finder $449.00
HILITE Visual fault finder keychain $265.00 $425.00
$195.00 $480.00
100-200x Inspection Scopes $220.00 FiberViewer Inspection Scope
Leviton’s inspections scopes allow techs to view
multimode and singlemode end-face polished safely Use FiberViewer microscopes to ensure fiber
and reduce change of over polishing (a side effect terminations are smooth and clean. Avoid the
of many coaxial inspection scopes). The 200X scope #1 cause of fiber link failure: dirty
features oblique viewing technology, ergonomic grip, end-faces.
200X magnification and full laser eye protections - Easy, manual focus of precision optics
through wavelength of 850-1550 nanometer. - Factory-tested filters to protect eyes from
harmful light exposure
- Universal adapters allow for inspection of
end faces on many different connector types
- Available in 200x or 400x
49886-SCP 100x inspection scope FT120 FiberViewer 200x inspection scope
49886-FSP 200x inspection scope FT140 FiberViewer 400x inspection scope
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 35
Major Credit Cards Accepted
