||1024 Series: Polycarbonate NEMA 4 WAP Enclosure
||This compact NEMA 4X enclosure is designed to protect wireless LAN WAPs with internal or external antennas in challenging indoor/outdoor environments. This rugged polycarbonate enclosure protects the WAP from weather, dust, and impacts, and is transparent to wireless signals so WAPs with body integrated antennas or small detachable antennas may be protected. The enclosure has a hinged door, molded-in padlock hasps for locking, and interior panel for attaching WAPs. Enclosure is paintable.
Features & BenefitsDesign: Polycarbonate NEMA AP enclosure designed for wall or mast mounting indoors or outdoors, where secure mounting is required. Large enough for APs with external dipole antennas. Clear, hinged, lockable door
Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. Transparent to wireless signals. Temperature rating from -40 to 70°C. Paintable
Clear, hinged, gasketed door with hasps for padlock
Internal plastic universal mounting panel
Construction: UL listed to UL508A (File #E194432). Back-box is light gray UL94-5VA PBT/PC blended plastic. Door is UL94-V0 clear polycarbonate
AP max. operating temperature should be de-rated by 9° C inside the 1024
Exterior size: 15.7 x 11.7 x 4.8 in. (400 x 297 x 122 mm). Interior dimensions: 14.8 x 10.8 x 4.5 in. (376 x 274 x 114 mm)
Designed for protecting leading vendors' enterprise wireless access points and DAS remotes, inside and outside
Hinged cover, latchable, lockable
Measurements (Maximum values):
Width: 11.7 in.
Height: 15.7 in.
Depth: 4.8 in.
Item Weight: 6.3 lbs.
Shipping Weight: 8 lbs.
(4) Stainless steel wall mounting brackets
(2) 1/2" O.D. Nylon spacer
(1) T-Bar bracket
(2) #6 x 7/8" screw
(4) #8 x 3/8" screw
(4) M5 x 10mm screw
(1) Interior mounting panel for most vendors' access points