Fluke Networks 19800009 TS19 Test Set With angled bed of nails clips

Home > Fluke Networks Butt Sets >

Fluke Networks 19800009 TS19 Test Set With angled bed of nails clips

SKU:

19800009

Your Price: $104.99
Condition: New
In Stock
Free Ground Shipping on orders over $99.00
Qty:
in stock
  • Details
  • Reviews
  • Related Items
  • PDF's
The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

Electrical
Loop Limit 2.4 kΩmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)
DC Resistance (Talk Mode) 150 Ωtypical at 80 mA current
AC Impedance (Monitor Mode) Low impedance (Ring position) 600 Ωat 1 KHz typical
High impedance (HI Z position) 100 kΩminimum at 1 KHz
Rotary Dial Output 10 pps .5 pps
Pulsing Rate
60 % ± 2 %
Percent Break
800 ms typical
Interdigit Interval Leakage During Break > 50 kΩ
DTMF Output ±1 % maximum
Tone Frequency Error Level per Tone Pair dBm maximum, - dBm minimum
High versus Low Tone Difference 4 dB maximum
   
Physical
Length 8.75 in (22.2 cm)
Width 2.375 in (6.03 cm)
Height 3.375 in (8.57 cm)
Weight 10.8 oz (.307 kg) maximum
Environmental Temperature Operating: -5 °C to °C
Storage: -40 °C to °C
Drop 1 meter, 4 times
Altitude To 3,000 meters (10,000 feet) maximum
Relative Humidity 10 %to 80 % (non-condensing)
Regulatory Standards Used 47 CFR Part 15, Subpart B
ICES-003 Issue 3
AS/NZS 3548
EMC Directive 89/336/EEC, EN 55022:98, EN 61326:97, A1:98 Annex C, EN 61000-4-2, EN 61000-4-3
LV Directive 73/23/EEC, EN 610010.1 (1993)
Certifications and Compliance Conformité Européenne. Conforms to relevant European Union directives.
CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 CSA-C22.2 No. 1010.1B-97, UL/ANSI 3111-1
Fluke Networks 19800009 TS19 Test Set With angled bed of nails clips
Average rating:
1 reviews

Write a review | Read all reviews

Featured positive reviews:

Fluke Networks 19800009 TS19 Test Set With angled bed of nails clips
Great Butt Set
By 
easy to use for getting a pots line
 

Other items you may be interested in:
Fluke Networks 19800003 TS19 Test Set w/Banana Jack & Alligator Clip

Fluke Networks 19800003 TS19 Test Set w/Banana Jack & Alligator Clip

SKU: 19800003
Our Price: $109.10
In stock products ship same day
"Fluke Networks P1980001 Line Cord, TS19, RJ11 to Piercing Pin"

Fluke Networks P1980001 Line Cord, TS19, RJ11 to Piercing Pin

SKU: P1980001
Our Price: $39.00
In stock products ship same day
"Fluke Networks P1980003 Line Cord, TS19, RJ11 to Banana Jack"

Fluke Networks P1980003 Line Cord, TS19, RJ11 to Banana Jack

SKU: P1980003
Our Price: $49.00
In stock products ship same day
"Fluke Networks P1980007 Line Cord, TS19, RJ11 to Ground Start"

Fluke Networks P1980007 Line Cord, TS19, RJ11 to Ground Start

SKU: P1980007
Our Price: $65.00
In stock products ship same day
"Fluke Networks P1980-009 Line Cord, TS19, RJ11 to Angled Bed-of-Nails"

Fluke Networks P1980-009 Line Cord, TS19, RJ11 to Angled Bed-of-Nails

SKU: P1980009
Our Price: $49.00
In stock products ship same day
For More on Fluke Networks Products click Here