Optical Fiber Identifier

 
  • Details
  • Reviews

  Product Features:
- Accepts 250 µm, 900 µm Coated Fiber, 3mm Jacketed Fiber Cable, and Ribbon Fiber
- No Head Swapping or CAM Adjustments
- Identifies Light Carrying Fiber
- Low Cost, Easy to Use
- Hand-Held, 9V Battery Operated - Low Insertion Loss - Traffic Remains Uninterrupted - Indicates 2 kHz Tone Visually and Audibly - Indicates Direction of Traffic

Reviews

Write a review | No reviews for this product.
AFL OFI-400 Optical Fiber Identifiers

AFL OFI-400 Optical Fiber Identifiers

 
SKU: OFI-400
Your Price: $1,355.00
 
 
  • Details
  • Reviews

The OFI-400 uses a unique optical head design featuring a two-position plunger that enables it to be used with 250 μm, 900 μm and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store and swap out optical plungers each time a different type of fiber is tested. The OFI-400 optical head induces a safe, repeatable macro-bend to the fiber that allows a small amount of light to
escape for analysis. The insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process.

NOYES OFI-400 instruments are designed to be simple, easy-to-use and reliable. Each features an ergonomically designed macro-bend trigger that is comfortable to use. An integrated, backlit LCD display allows OFI-400s to be used in dimly lit spaces. Powered by 1.5 V AAA batteries, the OFI-400 can make thousands of fiber tests before replacing batteries.

  Features
- Unique optical head with two-position plunger for use with all fiber types
- Built-in power meter with Set Reference feature
- Low insertion loss for in-service ID tasks
- Indicates direction of traffic
- Detects 270 Hz, 330 Hz, 1 kHz, 2 kHz test tones 2
- High Power detection (OFI-400HP model)
- Powered by AAA batteries
- Automatic power down feature and battery gauge
- Built-in self-test
- One-hand operation
- Hand-held and lightweight
- Rugged, drop-proof construction
- Three-year calibration interval

OFI-400
The OFI-400 is designed for use with a wide range of single-mode fibers including 250 μm (bare) coated, 900 μm buffered and ribbon fibers or 2 mm and 3 mm jacketed fibers. The OFI-400 is ideal for network personnel involved in installation, reconfiguration, restoration and maintenance tasks that involve bare, buffered, jacketed or ribbon fibers in outside plant pedestals, fiber cabinets, aerial enclosures and inside plant premises demarcation cabinets. The slim design of the OFI-400 head facilitates access in crowded splice trays.

OFI-400C
Designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers, the OFI-400C is ideal for general purpose maintenance, configuration and installation tasks. The OFI-400C is functionally equivalent to the OFI-400 but includes an optical head design and a calibration scheme optimized for use with jacketed fiber.

OFI-400HP
The OFI-400HP is designed for use where high levels of optical power are present. This includes fibers carrying a single high-power signal, CWDM or DWDM signals with high total power levels, amplified optical signals, or pump lasers associated with EDFA or Raman amplifiers.

When display reaches +23 dBm (200 mW) or greater, the OFI-400HP will display “High” warning indication.

Reviews

Write a review | No reviews for this product.
AFL OFI-400C Optical Fiber Identifiers

AFL OFI-400C Optical Fiber Identifiers

 
SKU: OFI-400C
Your Price: $1,355.00
 
 
  • Details
  • Reviews

The OFI-400 uses a unique optical head design featuring a two-position plunger that enables it to be used with 250 μm, 900 μm and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store and swap out optical plungers each time a different type of fiber is tested. The OFI-400 optical head induces a safe, repeatable macro-bend to the fiber that allows a small amount of light to
escape for analysis. The insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process.

NOYES OFI-400 instruments are designed to be simple, easy-to-use and reliable. Each features an ergonomically designed macro-bend trigger that is comfortable to use. An integrated, backlit LCD display allows OFI-400s to be used in dimly lit spaces. Powered by 1.5 V AAA batteries, the OFI-400 can make thousands of fiber tests before replacing batteries.

  Features
- Unique optical head with two-position plunger for use with all fiber types
- Built-in power meter with Set Reference feature
- Low insertion loss for in-service ID tasks
- Indicates direction of traffic
- Detects 270 Hz, 330 Hz, 1 kHz, 2 kHz test tones 2
- High Power detection (OFI-400HP model)
- Powered by AAA batteries
- Automatic power down feature and battery gauge
- Built-in self-test
- One-hand operation
- Hand-held and lightweight
- Rugged, drop-proof construction
- Three-year calibration interval

OFI-400
The OFI-400 is designed for use with a wide range of single-mode fibers including 250 μm (bare) coated, 900 μm buffered and ribbon fibers or 2 mm and 3 mm jacketed fibers. The OFI-400 is ideal for network personnel involved in installation, reconfiguration, restoration and maintenance tasks that involve bare, buffered, jacketed or ribbon fibers in outside plant pedestals, fiber cabinets, aerial enclosures and inside plant premises demarcation cabinets. The slim design of the OFI-400 head facilitates access in crowded splice trays.

OFI-400C
Designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers, the OFI-400C is ideal for general purpose maintenance, configuration and installation tasks. The OFI-400C is functionally equivalent to the OFI-400 but includes an optical head design and a calibration scheme optimized for use with jacketed fiber.

OFI-400HP
The OFI-400HP is designed for use where high levels of optical power are present. This includes fibers carrying a single high-power signal, CWDM or DWDM signals with high total power levels, amplified optical signals, or pump lasers associated with EDFA or Raman amplifiers.

When display reaches +23 dBm (200 mW) or greater, the OFI-400HP will display “High” warning indication.

Reviews

Write a review | No reviews for this product.
AFL OFI-400HP Optical Fiber Identifiers

AFL OFI-400HP Optical Fiber Identifiers

 
SKU: OFI-400HP
Your Price: $1,595.00
 
 
  • Details
  • Reviews

The OFI-400 uses a unique optical head design featuring a two-position plunger that enables it to be used with 250 μm, 900 μm and ribbon fiber or 2 mm and 3 mm jacketed fiber. Other brands of optical fiber identifiers require users to purchase, store and swap out optical plungers each time a different type of fiber is tested. The OFI-400 optical head induces a safe, repeatable macro-bend to the fiber that allows a small amount of light to
escape for analysis. The insertion loss induced by the macro-bend is too small to affect the signal on the fiber and the integrity of the fiber is unaffected by the measurement process.

NOYES OFI-400 instruments are designed to be simple, easy-to-use and reliable. Each features an ergonomically designed macro-bend trigger that is comfortable to use. An integrated, backlit LCD display allows OFI-400s to be used in dimly lit spaces. Powered by 1.5 V AAA batteries, the OFI-400 can make thousands of fiber tests before replacing batteries.

  Features
- Unique optical head with two-position plunger for use with all fiber types
- Built-in power meter with Set Reference feature
- Low insertion loss for in-service ID tasks
- Indicates direction of traffic
- Detects 270 Hz, 330 Hz, 1 kHz, 2 kHz test tones 2
- High Power detection (OFI-400HP model)
- Powered by AAA batteries
- Automatic power down feature and battery gauge
- Built-in self-test
- One-hand operation
- Hand-held and lightweight
- Rugged, drop-proof construction
- Three-year calibration interval

OFI-400
The OFI-400 is designed for use with a wide range of single-mode fibers including 250 μm (bare) coated, 900 μm buffered and ribbon fibers or 2 mm and 3 mm jacketed fibers. The OFI-400 is ideal for network personnel involved in installation, reconfiguration, restoration and maintenance tasks that involve bare, buffered, jacketed or ribbon fibers in outside plant pedestals, fiber cabinets, aerial enclosures and inside plant premises demarcation cabinets. The slim design of the OFI-400 head facilitates access in crowded splice trays.

OFI-400C
Designed specifically for use with 2 mm or 3 mm jacketed single-mode fibers, the OFI-400C is ideal for general purpose maintenance, configuration and installation tasks. The OFI-400C is functionally equivalent to the OFI-400 but includes an optical head design and a calibration scheme optimized for use with jacketed fiber.

OFI-400HP
The OFI-400HP is designed for use where high levels of optical power are present. This includes fibers carrying a single high-power signal, CWDM or DWDM signals with high total power levels, amplified optical signals, or pump lasers associated with EDFA or Raman amplifiers.

When display reaches +23 dBm (200 mW) or greater, the OFI-400HP will display “High” warning indication.

Reviews

Write a review | No reviews for this product.