T3 Net Chaser - Ethernet Speed Certifier

 
 
  • Details
  • Reviews

21st Century Dual Mode TDR for Testing and Monitoring Energized and Unenergized Cables

The Arc Chaser Dual Mode TDR is capable of finding faults (Opens, Shorts, Arc Faults) on fully energized cables up to 600 Volts. Arc Chaser can monitor live cables for intermittent conditions, capturing these “events” and reporting where and when they occur. Using advanced Spread Spectrum Time Domain Reflectometry (SSTDR), Arc Chaser is capable of accuracy to fault of better than 1%.


- Works on both energized or unenergized cables
Discover cable events which can only be shown under load
- Monitors intermittent arc faults, opens and shorts
Find faults caused by vibration that are otherwise hidden
- Shows results in graphical or text format
Clear and simple view of faults
- Saves reports, transferable to PCs for storage, and printing
Maintain history of information
- Cable fault finding
Easily verify quality of entire cable length
- Tone generation
Signal tracing of cables
- Cable Test Setup
Walks users through cable test setup
- Self-calibrates to maintain accuracy over time or due to environmental change
No metrology calibration required
- English or Metric Measurements
International applications
- 600V Category III
Meets full international requirements for working on energized cables.
- Rechargeable Lithium Ion Battery Pack
8-10 hours of battery power in the field
- Color Touch Screen Display
Easy to navigate in all lighting environments
- Compact Form Factor
Usable in tight space environments
- 3rd Generation Rechargeable
Lithium-Ion Batteries 8 to 10 hours of continuous use
- Benchtop, Handheld, or Hung Up
Easy to use for field flight line and production work
- Uses Modular Cable Interfaces
Can connect to many different types of systems
- Waterproof/Shock Resistant Transport Case
Protects equipment in harsh conditions
- SD Card for Data File Transfer of Cable Tests
Easy to maintain report files and save for later viewing
- Upgradeable Firmware
Stay up to date with cable settings, features and enhanced software upgrades.


Measurement Technology
Spread Spectrum Time Domain Reflectometry
U.S. Patents and Patents Pending
Power
Wall power voltage input Range: 10- 28V, 20W
Arc Chaser will run with wall power down to 4V, however batteries will not charge unless input voltage is greater than 10V.
Totex battery pack, with four LIO Rechargeable Cells.
Full screen brightness, dynamic test, 7.8V battery: 335mA.
0- 100% brightness, @7.8V: 90mA
Typical battery current: 185mA
Low power mode (or timed out): 70mA;
Off mode: 420 μA board (+500uA battery pack circuitry.)
Maximum Range
12,000 ft (3,657m) at .999 VOP
Maximum testable cable length varies with VOP and cable type.
VOP (%) with 3 digit precision ranging from 20.0% to 99.9%
Output Connector
Banana Jacks 600V CAT III
Leader Cable
Cable Assembly, 5 ft. (1.5m) 600 Volt CAT III, 95 Ohm
Battery Life
Battery Pack, initial 5200 mA-hr (typical):
Operating at static screen, or occasional static test:
185mA (assuming 65% LCD brightness)
Dynamic Operation : 280mA (assuming 65% LCD brightness)
Low power – 70mA, assuming full charge of 5000mAH, 71 hours.
Off - 420 μA board (+500uA battery pack circuitry.)
Altitude
10,000 ft (3,050 m)
Temperature
Operating: (-10 if standard crystal) -20 to 70°C);
Storage: (-30 to 80°C)
Humidity
10 to 90% non-condensing
Enclosure
High-strength PC/ABS plastic with V0 rating with boot
Size
2.41”H x 4.18”W x 9.03”L (6.12 x 10.61 x 22.94 cm)
Weight
With batteries: 1 lb 9 oz (862 g)
Safety Compliances
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/ CSA-C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, EMC EN61326-1
Warranty
1 Year


  Includes:
- Arc Chaser main unit
- T3 Leader Cable 5ft 600V CAT III
- Flanged crocodile clips: red and black 600V CAT III UL/CSA
- Dual banana to BNC female
- Adapter: BNC male to F female
- Power Supply
- SD Card
- Micro USB Cable
- Protective Arc Chaser Case

Reviews

Write a review | No reviews for this product.