Oberon Ceiling Enclosures Suspended
|
The Model 1059‐00 wireless LAN access point enclosure is
a locking, 2 x 2 ceiling tile enclosure designed to
accommodate access points with non‐detachable antennas
from most manufacturers. This aesthetic, white
powder coated steel enclosure has an impact resistant,
RF transparent door, which protrudes only 4" below the
ceiling plane. No ceiling tile cuts are required for
installation.
- |
Ceiling tile enclosure
designed for access points from most manufacturers |
- |
RF transparent cover allows
use of access point with non‐detachable or
integrated antennas |
- |
UL50 Listed and designed to
meet NEC300‐22 and 300‐23 for plenum installations |
- |
Dome is UL 94‐5VA Classified
ABS Plastic |
- |
OSHPD approved OPA # 1638
Enclosure is deep enough for any access point with
an overall height of less than 5Ύ" |
- |
Construction: Textured white
powder‐coated steel, 16 ga. backbox, UL‐94V5A impact
resistant textured white ABS door |
- |
Fully hinged locking door,
keyed alike |
- |
Size: Flange is 2 x 2, AP
Enclosure is 18" x 18" x 2.6" deep, ABS dome is 14"
Sq. x 4" deep |
- |
Weight: 17.5lbs (not
including access point) |
- |
Enclosure must be supported
by the building ceiling structural system, not tile
gridwork. |
|
Kit Included |
- |
Universal mounting plate,
mounting screws and hardware |
- |
(4) Suspension wires |
- |
(2) Ύ Trade size conduit
connectors for power/data cable openings in the
back‐box |
- |
Mounting
Instructions |
Other items you may be interested in:
SKU: 1052-AN-ANT16
Our Price: $210.00
In stock products ship same day
|
SKU: 1052-AP105
Our Price: $230.00
In stock products ship same day
|
SKU: 1052-CCOAP
Our Price: $230.00
In stock products ship same day
|
SKU: 1047-DOME
Our Price: $245.00
In stock products ship same day
|
|
|
|
The Model 1052-CCOAP wireless LAN access point enclosure is a locking 2' x 2' suspended ceiling tile enclosure designed specifically for mounting and securing Cisco wireless access points with internal antennas. This aesthetic, white powder coated steel enclosure conveniently replaces a standard ceiling tile, and simplifies access point moves, adds, changes and maintenance. The access point is fastened into the door, and when the door is closed and locked, the AP is secured. From the ceiling mounted location, the access point provides ideal wireless coverage. The 1052 series has interchangeable retrofit doors, allowing current owners to install new AP or antenna solutions from different vendors, simply by swapping doors.
- |
2’ x 2’ suspended ceiling tile-like enclosure for Cisco wireless access points |
- |
AP mounts into the door, with antenna surface fully exposed to the room space |
- |
UL listed and designed to meet National Electric Code Paragraphs 300-22 and 300-23 for installation in the above ceiling space |
- |
OSHPD approved (OPA #1638-10 (.pdf)) |
- |
Durable, attractive, textured powder coat finish matches many ceiling tiles |
- |
Fully-hinged locking door, keyed alike |
- |
Interchangeable doors permit simple migration to new access points and antennas |
- |
Enclosure back box is effective dust barrier to simplify ICRA procedure compliance in hospitals |
|
Kit Includes |
- |
(1) Unit Per Carton |
- |
(4) Access Point Mounting Screws |
- |
(1) Access Point Mounting Plate |
- |
(4) Hanger wires |
- |
(1) Cable Egress Fire Stop kit (¾" trade size conduit connector, and fire block stop insert) |
- |
(2) Keys For Lock |
- |
Installation Instructions |
- |
Shipping Weight: 22 lbs. |
Other items you may be interested in:
SKU: 1052-AN-ANT16
Our Price: $210.00
In stock products ship same day
|
SKU: 1052-AP105
Our Price: $230.00
In stock products ship same day
|
SKU: 1047-DOME
Our Price: $245.00
In stock products ship same day
|
SKU: 1059-00
Our Price: $335.00
In stock products ship same day
|
|
|
|
The Model 1052-AN-ANT16 wireless LAN access point enclosure is a UL listed locking 2’ x 2’ ceiling tile enclosure designed specifically for the Aruba Networks access points with detachable antennas (AP-60, AP-120, AP-124). This aesthetic, white powder coated steel enclosure has mounting features in the door for installation of the Aruba Networks AP-ANT-16 antenna, simplifying installation & optimizing wireless coverage. No ceiling tile cuts are required for installation.
- |
Designed for securing Aruba Networks enterprise access points with detachable antennas |
- |
Suitable for installation in air handling spaces |
- |
Locking, fully hinged door, for mounting 3 X 1 antenna |
- |
Door is interchangeable with other Oberon 1052 series doors |
- |
Simplify code, industry directives, policy, and aesthetics compliance |
|
Kit Includes: |
- |
Mounting screws and hardware |
- |
(4) Suspension wires |
- |
(2) ¾ " Trade conduit connectors for power and data cable openings in the back-box |
- |
Installation Instructions |
Other items you may be interested in:
SKU: 1052-AP105
Our Price: $230.00
In stock products ship same day
|
SKU: 1052-CCOAP
Our Price: $230.00
In stock products ship same day
|
SKU: 1047-DOME
Our Price: $245.00
In stock products ship same day
|
SKU: 1059-00
Our Price: $335.00
In stock products ship same day
|
|
|
|
Oberon's Model 1052‐AP105 wireless LAN access point
enclosure is a locking, 2' x 2' ceiling tile enclosure
designed specifically to conveniently mount and secure
the Aruba Networks AP‐105 wireless access points. The
enclosure is based on Oberon's popular 1052‐00 universal
wireless access point enclosure, with a door designed
specifically for Aruba Networks AP105 wireless access
point. No ceiling tile cuts are required for
installation. Just mount the access point into the door,
place the ceiling tile enclosure in the ceiling, secure
the enclosure to the ceiling support structure, and the
access point is conveniently and aesthetically secured
in the ceiling. Upgrades to different styles of access
points are achieved by simply unlocking and replacing
the door.
- |
Ceiling tile enclosure
specifically designed for Aruba Networks AP‐105
access points |
- |
UL listed and designed to
meet NEC300-22 and 300-23 for plenum installations |
- |
OSHPD approved OPA # 1638 |
- |
Construction: Textured white
powder-coated steel, 16 ga. backbox, 14 ga. door |
- |
Fully hinged locking door,
keyed alike. Door can be replaced to migrate to new
access points. |
- |
Size: Flange is 2 x 2, AP
Enclosure is 12.5" x 12.5 " x 4.5" deep |
- |
Weight: 13lbs (not including
access point or antenna) |
- |
Enclosure must be supported
by the building ceiling structural system, not the
tile gridwork. |
|
Kit Included |
- |
Access point mounting
screws |
- |
(4) Suspension wires |
- |
(2) Ύ Trade conduit
connectors for power and data cable openings in
the back‐box |
- |
Mounting Instructions |
Other items you may be interested in:
SKU: 1052-AN-ANT16
Our Price: $210.00
In stock products ship same day
|
SKU: 1052-CCOAP
Our Price: $230.00
In stock products ship same day
|
SKU: 1047-DOME
Our Price: $245.00
In stock products ship same day
|
SKU: 1059-00
Our Price: $335.00
In stock products ship same day
|
|
|
|
|
|
|
Locking, 2' x 2' suspended ceiling tile enclosure mounts and secures wireless access point and DAS remote units with non-detachable or internal antennas. This steel enclosure replaces a standard ceiling tile, and its larger back-box is suitable for larger access points and antennas. The interchangeable door simplifies access point and antenna changes. Access points can be mounted in the door or inside the enclosure with the configurations with the dome. |
|
|
|
Features & Benefits |
- |
Attractive, textured, powder-coat finish matches many ceilings |
- |
Larger back-box designed for securing most vendors' enterprise wireless access points and DAS remotes |
- |
Interchangeable doors permit simple migration to new access points and antennas |
- |
Enclosure back-box is an effective dust barrier to simplify ICRA procedure compliance |
|
|
|
Technical Specifications |
- |
Design: Economical ceiling tile enclosure designed for wireless access points with integrated antennas. Access point mounts in interchangeable door. Fits into tandard 2’ x 2’ (U.S.) ceiling grid. Plastic dome in door, suitable for most vendors’ APs. |
- |
Performance: UL Listed for low-voltage applications, and designed to meet NEC300-22 and 300-23 for plenum installations. OSHPD approved, OPM-0110-13. |
- |
Locking, quick release interchangeable door for migration to other access points |
- |
Firestop grommet for insertion into back-box, large enough for 2 Cat6A cables |
- |
1 ” trade size knockouts in four walls |
- |
Construction: 20 ga. galvanized steel back-box; 18 ga. white, powder-coated steel flange and door. UL-94-5VA white ABS plastic dome; solid back-box fills opening behind access point, creating an effective fire, smoke, and dust barrier to simplify ICRA compliance |
- |
Enclosure must be supported by the building structure, independent of the suspended ceiling, per NEC paragraph 300.11; includes hanger wire |
- |
Maximum weight inside enclosure is 25 lbs. |
- |
For recessed grid ceilings, designate “–T” for tegular flange units |
- |
AP max. operating temperature should be de-rated by 6° C inside the enclosure |
- |
Size: 23.75 inches by 23.75 inches by 3 inches (603 mm by 603 mm by 76mm); back-box is 12.5 inches by 12.5 inches x 3 inches |
|
|
|
Standards for Safety |
- |
UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems |
- |
CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements |
- |
OSHPD Approval OPM-110-13 |
|
|
|
|
|
|
1040 Series Cloud or Canopy Ceiling WAP Installation Kit |
|
Model 1040 is an economical, easy-to-install cloud or canopy mounting kit for WAPs from most vendors. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and the white trim is placed around the WAP. The WAP is attached to a universal mounting T-bar and pressed into the panel bridge. The WAP is now recessed into the ceiling much like a recessed light fixture for unobstructed wireless coverage. WAP trim can be swapped out for alternate WAP brands. |
|
|
|
|
|
|
1040 Series Cloud or Canopy Ceiling WAP Installation Kit |
|
Model 1040 is an economical, easy-to-install cloud or canopy mounting kit for WAPs from most vendors. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and the white trim is placed around the WAP. The WAP is attached to a universal mounting T-bar and pressed into the panel bridge. The WAP is now recessed into the ceiling much like a recessed light fixture for unobstructed wireless coverage. WAP trim can be swapped out for alternate WAP brands. |
|
|
|
|
|
|
1040 Series Cloud or Canopy Ceiling WAP Installation Kit |
|
Model 1040 is an economical, easy-to-install cloud or canopy mounting kit for WAPs from most vendors. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and the white trim is placed around the WAP. The WAP is attached to a universal mounting T-bar and pressed into the panel bridge. The WAP is now recessed into the ceiling much like a recessed light fixture for unobstructed wireless coverage. WAP trim can be swapped out for alternate WAP brands. |
|
|
|
|
|
|
1040 Series Cloud or Canopy Ceiling WAP Installation Kit |
|
Model 1040 is an economical, easy-to-install cloud or canopy mounting kit for WAPs from most vendors. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and the white trim is placed around the WAP. The WAP is attached to a universal mounting T-bar and pressed into the panel bridge. The WAP is now recessed into the ceiling much like a recessed light fixture for unobstructed wireless coverage. WAP trim can be swapped out for alternate WAP brands. |
|
|
|
|
|
|
1040 Series Cloud or Canopy Ceiling WAP Installation Kit |
|
Model 1040 is an economical, easy-to-install cloud or canopy mounting kit for WAPs from most vendors. A cutout is made in the ceiling panel, the panel bridge is placed above the ceiling panel, and the white trim is placed around the WAP. The WAP is attached to a universal mounting T-bar and pressed into the panel bridge. The WAP is now recessed into the ceiling much like a recessed light fixture for unobstructed wireless coverage. WAP trim can be swapped out for alternate WAP brands. |
|
|
|
|
|
|
1074 Series: Suspended Ceiling Zone Enclosure |
|
Locking suspended ceiling enclosure mounts and secures general-purpose telecom/zone equipment and is a consolidation point for securing pre-terminated “plug-n-play” copper and fiber optic cable assemblies. Secure active equipment - Optical Network Terminals (ONTs), small workgroup switches, WAPs, and DAS remote access units (RAUs). The only plenum-rated enclosure with fire-stopped openings for the multi-fiber array modules and multi-copper connector modules used in pre-terminated solutions. |
|
|
|
|
|
|
1074 Series: Suspended Ceiling Zone Enclosure |
|
Locking suspended ceiling enclosure mounts and secures general-purpose telecom/zone equipment and is a consolidation point for securing pre-terminated “plug-n-play” copper and fiber optic cable assemblies. Secure active equipment - Optical Network Terminals (ONTs), small workgroup switches, WAPs, and DAS remote access units (RAUs). The only plenum-rated enclosure with fire-stopped openings for the multi-fiber array modules and multi-copper connector modules used in pre-terminated solutions. |
|
|
|
|
|
|
1074 Series: Suspended Ceiling Zone Enclosure |
|
Locking suspended ceiling enclosure mounts and secures general-purpose telecom/zone equipment and is a consolidation point for securing pre-terminated “plug-n-play” copper and fiber optic cable assemblies. Secure active equipment - Optical Network Terminals (ONTs), small workgroup switches, WAPs, and DAS remote access units (RAUs). The only plenum-rated enclosure with fire-stopped openings for the multi-fiber array modules and multi-copper connector modules used in pre-terminated solutions. |
|
|
|
|
|
|
1074 Series: Suspended Ceiling Zone Enclosure |
|
Locking suspended ceiling enclosure mounts and secures general-purpose telecom/zone equipment and is a consolidation point for securing pre-terminated “plug-n-play” copper and fiber optic cable assemblies. Secure active equipment - Optical Network Terminals (ONTs), small workgroup switches, WAPs, and DAS remote access units (RAUs). The only plenum-rated enclosure with fire-stopped openings for the multi-fiber array modules and multi-copper connector modules used in pre-terminated solutions. |
|
|
|
The Model 1052-00 wireless LAN access point enclosure is
a locking 2 x 2 ceiling tile enclosure designed
specifically for the Cisco 1232/1242/1260/3500e/3600e
and many Aruba Networks access points. The enclosure
accommodates many other manufacturers access points with
Oberons optional universal mounting plate. This
aesthetic, white powder coated steel enclosure has
openings in the door for up to six antennas. No ceiling
tile cuts are required for installation.
- |
Ceiling tile enclosure
specifically designed for Cisco 1242 and Aruba 70
access points (when using Aruba 70 access point,
requires Aruba Networks AP-70-MNT mounting bracket) |
- |
Accommodates many other
manufacturers access points with Oberon universal
mounting plate P/N
38-1052-MNT-KIT |
- |
UL listed and designed to meet
NEC300-22 and 300-23 for plenum installations |
- |
OSHPD approved OPA # 1638 |
- |
Accommodates up to (6) external
antennas using the bulkhead connector kit for dipole
antennas (Oberon P/N 35-BULKHD-KIT) or Oberon 34-ZDUAL
or 34-DMDUAL
antennas |
- |
Construction: Textured white
powder-coated steel, 16 ga. backbox, 14 ga. door |
- |
Fully hinged locking door, keyed
alike |
- |
Size: Flange is 2 x 2, AP
Enclosure is 12.5" x 12.5 " x 4.5" deep |
- |
Weight: 13lbs (not including
access point or antenna) |
- |
Enclosure
must be supported by the building ceiling structural
system, not tile gridwork. |
|
Kit Includes: |
- |
Access point mounting
screws |
- |
(4) Suspension wires |
- |
(2) Ύ Trade conduit
connectors for power and data cable openings in
the back‐box |
- |
Mounting Instructions |
|
|
|