Oberon Recessed Hard Ceiling enclosures
1 2
| |
The Model 1051-00 is a locking, recessed hard lid ceiling or wall enclosure designed to secure wireless access points and DAS remote units with detachable antennas from most vendors. This aesthetic, white powder coated steel enclosure can be recessed into the ceiling or wall, and has openings in the door for ceiling mounted antennas. Mounting hardware in the flange secures the flush mounted enclosure to the ceiling or wall. The 1051/1052 series has interchangeable retrofit doors, allowing current owners to install new access point or antenna solutions from different vendors, simply by swapping doors. The Model 1051-00 is deep enough to accommodate the Cisco 3600 series and other large 802.11n wireless access points, and DAS remote access units, with external connectors and up to six antennas.
| |
Recessed, hard lid ceiling or wall enclosure for securing wireless access points and DAS remotes with detachable antennas |
| |
Universal T-bar mounting bracket allows easy installation of most vendors' access points |
| |
UL listed and designed to meet National Electric Code Paragraphs 300-22 and 300-23 for installation in the above ceiling space; OSHPD approved: OPA #1638-10 (.pdf) |
| |
Fully-hinged locking door, keyed alike |
| |
Interchangeable doors permit simple migration to new access points and antennas |
| |
Enclosure back box is effective dust barrier to simplify ICRA procedure compliance |
| |
Kit Includes: |
| - |
(1) unit per carton |
| - |
(1) Internal universal access point mounting T-bar bracket |
| - |
(4) Hanger wires |
| - |
(1) cable egress fire block kit (¾" trade size conduit connector, and fire block foam insert) |
| - |
(2) keys for lock |
| - |
(4) White cosmetic screw caps, and (4) #10 ceiling/wall attachment screws |
| - |
Installation Instructions |
| - |
Shipping Weight: 17 lbs. |
Other items you may be interested in:
SKU: 1076-CCOAP
Our Price: $224.00
In stock products ship same day
|
SKU: 1076-CP
Our Price: $285.00
In stock products ship same day
|
SKU: 1076-WA
Our Price: $255.00
In stock products ship same day
|
|
|
| |
The Model 1076-CP wireless LAN access point mounting solution is a locking, recessed wall or hard ceiling insert designed specifically to secure wireless access points and other wireless components while satisfying UL criteria for heat and visible smoke release in air-handling spaces. This aesthetic, white powder-coated steel enclosure has an impact resistant clear polycarbonate dome which is virtually transparent to wireless and IR signals. Installation requires a square opening to be cut into the wall or ceiling. The 15" square, beveled flange conceals the opening in the wall. The enclosure is retained in place by two wall bridges. Interchangeable doors permit migration to different equipment without removing enclosure from the wall. An interior universal AP mounting bracket emulates a ceiling T-Bar, allowing most manufacturer’s AP to be easily mounted.
| |
Designed for mounting most vendors enterprise wireless access points on the wall |
| |
Kit Includes: |
| - |
(2) Wall bridges |
| - |
Universal access point "T-bar" mounting bracket |
| - |
(4) No. 8-32 hex nuts |
| - |
(1) fireblock cable egress kit |
| - |
Mounting Instructions |
Other items you may be interested in:
SKU: 1051-00
Our Price: $200.00
In stock products ship same day
|
SKU: 1076-CCOAP
Our Price: $224.00
In stock products ship same day
|
SKU: 1076-WA
Our Price: $255.00
In stock products ship same day
|
|
|
| |
The Model 1076-WA wireless LAN access point mounting solution is a locking, recessed wall or hard ceiling insert designed to secure wireless access points and other wireless components while satisfying UL criteria for heat and visible smoke release in air-handling spaces. This aesthetic, white powder-coated steel enclosure has an impact-resistant ABS dome which is virtually transparent to wireless signals. Installation requires a square opening to be cut into the wall or ceiling. The 15" square, beveled flange conceals the opening in the wall. The enclosure is retained in place by two wall bridges. Interchangeable doors permit migration to different equipment in the future without removing enclosure from the wall. An interior universal AP mounting bracket emulates a ceiling T-Bar, allowing most manufacturer’s AP to be easily mounted.
Designed for mounting most vendors enterprise wireless access points on the wall
| |
Kit Includes: |
| - |
(2) Wall bridges |
| - |
Universal access point "T-bar" mounting bracket |
| - |
(4) No. 8-32 hex nuts |
| - |
(1) cable egress fire block kit (½" trade size conduit connector and fire block foam insert) |
| - |
(2) Keys for lock |
| - |
Installation instructions |
| - |
Shipping weight: ~ 8 lbs. |
Other items you may be interested in:
SKU: 1051-00
Our Price: $200.00
In stock products ship same day
|
SKU: 1076-CCOAP
Our Price: $224.00
In stock products ship same day
|
SKU: 1076-CP
Our Price: $285.00
In stock products ship same day
|
|
|
| |
The Model 1076-CCOAP wireless LAN access point mounting solution is a locking, recessed wall or ceiling insert designed specifically to secure the Cisco 1040/1140/1260/3500/3600 series access points while satisfying UL criteria for heat and visible smoke release in air-handling spaces. This aesthetic, white powdercoated all steel enclosure has a bracket in the door to which the access point is attached. When the door is closed, the access point is locked in place and the enclosure preserves the UL criteria. Installation requires a square opening to be cut into the wall or ceiling. The 15" square beveled flange conceals the opening in the wall. The enclosure is retained in place by two wall bridges. Interchangeable doors permit migration to different equipment in the future without removing enclosure from the wall.
| |
Designed for mounting most vendors enterprise wireless access points on the wall |
| |
Kit Includes |
| - |
(1) Unit Per Carton |
| - |
(2) Wall Bridge |
| - |
(1) Cable Egress Fire Stop Kit (½” trade size conduit connector, and fire block foam insert) |
| - |
(4) Access Point Mounting Screw |
| - |
(1) Access Point Mounting Plate |
| - |
(4) 1/2" Standoff |
| - |
(4) Hanger Wire |
| - |
(2) Key For Lock |
| - |
Installation Instructions |
| - |
Shipping weight: 13 lbs. |
Other items you may be interested in:
SKU: 1051-00
Our Price: $200.00
In stock products ship same day
|
SKU: 1076-CP
Our Price: $285.00
In stock products ship same day
|
SKU: 1076-WA
Our Price: $255.00
In stock products ship same day
|
|
|
| |
| |
|
| |
1042 Series: Recessed Ceiling WAP Install Kit - Old construction |
| |
Model 1042 provides the simplest way to recess WAPs into the ceiling for an aesthetic, professional installation. A cutout is made in the ceiling and the backbox is fastened to the ceiling (remodel). The WAP fastens to the WAP-specific trim, and the trim to the back-box. The WAP is recessed into the ceiling much like a recessed light fixture. Access point trim can be easily swapped for new trim if the WAP brand or model changes in the future. See specs for AP-specific model names. |
|
|
| |
| |
|
| |
1042 Series: Recessed Ceiling WAP Install Kit - Old construction |
| |
Model 1042 provides the simplest way to recess WAPs into the ceiling for an aesthetic, professional installation. A cutout is made in the ceiling and the backbox is fastened to the ceiling (remodel). The WAP fastens to the WAP-specific trim, and the trim to the back-box. The WAP is recessed into the ceiling much like a recessed light fixture. Access point trim can be easily swapped for new trim if the WAP brand or model changes in the future. See specs for AP-specific model names. |
|
|
| |
| |
|
| |
1042 Series: Recessed Ceiling WAP Install Kit - Old construction |
| |
Model 1042 provides the simplest way to recess WAPs into the ceiling for an aesthetic, professional installation. A cutout is made in the ceiling and the backbox is fastened to the ceiling (remodel). The WAP fastens to the WAP-specific trim, and the trim to the back-box. The WAP is recessed into the ceiling much like a recessed light fixture. Access point trim can be easily swapped for new trim if the WAP brand or model changes in the future. See specs for AP-specific model names. |
|
|
| |
| |
|
| |
1042 Series: Recessed Ceiling WAP Install Kit - Old construction |
| |
Model 1042 provides the simplest way to recess WAPs into the ceiling for an aesthetic, professional installation. A cutout is made in the ceiling and the backbox is fastened to the ceiling (remodel). The WAP fastens to the WAP-specific trim, and the trim to the back-box. The WAP is recessed into the ceiling much like a recessed light fixture. Access point trim can be easily swapped for new trim if the WAP brand or model changes in the future. See specs for AP-specific model names. |
|
|
| |
| |
|
| |
1042 Series: Recessed Ceiling WAP Install Kit - Old construction |
| |
Model 1042 provides the simplest way to recess WAPs into the ceiling for an aesthetic, professional installation. A cutout is made in the ceiling and the backbox is fastened to the ceiling (remodel). The WAP fastens to the WAP-specific trim, and the trim to the back-box. The WAP is recessed into the ceiling much like a recessed light fixture. Access point trim can be easily swapped for new trim if the WAP brand or model changes in the future. See specs for AP-specific model names. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
| |
| |
|
| |
1044 Series: WAP Mount Tile Bridge w/Back-Box |
| |
Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for wireless access points from most vendors. The WAP recesses into the ceiling tile and the trim creates a professional finished appearance. The WAP is recessed in the preferred ceiling orientation much like a recessed light fixture, providing ideal, unobstructed wireless coverage. Access point trim can be easily swapped out for new trim if the WAP brand or model is changed in the future. |
|
|
1 2
|
