Triplett Products

The Triplett SatAlign is a quick and economical way for the do-it-yourselfer to install or realign a DBS satellite dish. No need to pay for expensive service calls! Just connect the SatAlign between the LNB and any DBS Satellite Receiver and you can precisely align your dish in seconds. The SatAlign, with its built-in signal strength meter, is extremely sensitive with a quick response time making satellite alignment a breeze. The SatAlign works with all brands of Dish Antennas and Satellite Receivers. It will save you hours of installation time and guarantees exact alignment for the best picture quality and maximum rainfade reserve.

  Features:
- Hand-held analog VOM.
- Designed with the telco service person in mind.
- 16 ranges and functions.
- Polarity reversing switch.
- 3 year warranty.

The model 2001 includes all of the features of the Model 1000 with the addition of Cab Filters. The Model 2001 was designed for passenger railroads using 100Hz and 250Hz coding systems.

  Features:
- 100Hz and 250Hz Cab Filters.
- All Pass position - bypasses cab filters.
- Auto polarity in DC functions.
- Selectable EC Amps polarity.
- Direct measurement of code parameters.
- Relay contact on time (Dry Contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.

The model 2002 also includes all of the features of the Model 2000 with the addition of cab filters. The model 2002 was designed for rapid transit / commuter type railroads using 100Hz and 200Hz coding systems.

  Features:
- 100Hz and 200Hz cable filters.
- All Pass position - bypasses cab filters.
- Auto polarity in DC functions..
- Selectable DC amps functions.
- Selectable DC amps polarity.
- Direct measurement of code parameters.
- Relay contact on time (Dry Contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.

The Model 2003 also includes all of the features of the Model 2000 with the addition of cab filters. The model 2003 was designed for railroads using 60Hz and 100Hz coding systems.

  Features:
- 60Hz and 100Hz cab filters.
- All pass position - bypasses cable filters.
- Auto polarity in DC functions.
- Selectable DC Amps Polarity.
- Direct measurement of code parameters.
- Relay contact on time (dry contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.

-	Base unit with Cab Filters
-	Upgradable to 2001, 2002 or 2003
-	Auto Polarity in DC functions
-	Selectable DC Amps Polarity
-	Direct measurement of Code Parameters
-	Relay Contact On Time (dry contact) requires no adjustment
-	Ohmmeter Voltage Mode detects either polarity voltage including AC
-	Field replaceable protective window

	Features
-	37 measurement ranges	-	3 3/4 digit resolution
-	4000 count display	-	Auto power off
-	Low battery indicator	-	Auto polarity
-	Capacitance range	-	Resistance range
-	Frequency range	-	AC/DC current range
-	Shock absorbing case	-	Overload protection
-	Built-in stand	-	Test leads attached to unit
-	Voltage range up to 600V	-	3 year limited warranty
	Specifications
-	DC Voltage up to 600V	-	AC Voltage up to 600V
-	DC Current up to 400mA	-	AC Current up to 400mA
-	Resistance (Ohms) 400 to 4M	-	Diode Test
-	Capacitance 40nF to 100uF	-	Continuity Test
-	Frequency Range 10Hz to 10KHz	-	Dimensions: 3 x 5 x 1 in
-	Overload protection   - CAT I & II 600V AC/DC   - Ohms ranges: N/A   - Diode Test: N/A   - Continuity: N/A   - Fuses: uA, Ma N/Ae   - Agency Approval CE
-	Weight: 0.25 lbs.	-	Battery life: 150 hours (2-LR-44)