Middle Atlantic Wall Mount Cabinets

Prev 1 2 3 4 5 Next 

 
  • Details
  • Reviews

Featuring an innovative, low-profile parallel-to-the-wall design. The Horizontal Distribution Cabinet is ideal for mounting patch panels with switches, hubs, routers and other equipment. Protruding only 7 1/2" from the wall, the HDR provides 4 total rackspaces for equipment mounting in two sections

  Structural Features:
- Beveled front door with flanges on all sides provides greater security for equipment
- 150 lbs weight capacity
- Reversible hinged door with lock and padlockable latch allows opening from either side and provides additional security in open area installations
- Integral electrical box simplifies power distribution
- Constructed of 16-guage steel, the HDR measures 24" wide by 36" high x 7 1/2" deep
- Finished in a durable putty powder coat
- Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting
- Pivoting rackrail speeds installation and servicing

  Thermal Management
- Ventilation slots on front cover address thermal management needs
- 4 1/2" fan kit available, mounts externally to maximize equipment mounting and cable management space

  Cable Management
- Upper set of 2 space rackrail pivots 90° with a positive stop to simplify patch panel wire terminations
- Lower set of 2 space rackrail pivots for easy access to rear switch, hub, and router connection points
- Cable management features include a 7" x 4" cable pass-through on backpan, abundant cable tie point and integral lacing bar on top set of rackrail
- 24" length of hook and loop fasteners included to facilitate cable management
- Laser knockouts on the top, bottom, and sides for cable entry

  Code Compliancy
- Grounding/bonding stud in base of cabinet facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
- UL Listed in the US and Canada

* Not eligible for Free Shipping

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Featuring an innovative, low-profile parallel-to-the-wall design. The Horizontal Distribution Cabinet is ideal for mounting patch panels with switches, hubs, routers and other equipment. Protruding only 7 1/2" from the wall, the HDR provides 4 total rackspaces for equipment mounting in two sections

  Structural Features:
- Beveled front door with flanges on all sides provides greater security for equipment
- 150 lbs weight capacity
- Reversible hinged door with lock and padlockable latch allows opening from either side and provides additional security in open area installations
- Integral electrical box simplifies power distribution
- Constructed of 16-guage steel, the HDR measures 24" wide by 36" high x 7 1/2" deep
- Finished in a durable putty powder coat
- Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting
- Pivoting rackrail speeds installation and servicing

  Thermal Management
- Ventilation slots on front cover address thermal management needs
- 4 1/2" fan kit available, mounts externally to maximize equipment mounting and cable management space

  Cable Management
- Upper set of 2 space rackrail pivots 90° with a positive stop to simplify patch panel wire terminations
- Lower set of 2 space rackrail pivots for easy access to rear switch, hub, and router connection points
- Cable management features include a 7" x 4" cable pass-through on backpan, abundant cable tie point and integral lacing bar on top set of rackrail
- 24" length of hook and loop fasteners included to facilitate cable management
- Laser knockouts on the top, bottom, and sides for cable entry

  Code Compliancy
- Grounding/bonding stud in base of cabinet facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
- UL Listed in the US and Canada

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Structural Features
- 26” width cabinet to allow for much needed space for patching.
- Locking swing open center section allows for easy front and rear access to equipment and cabling
- Includes an easily reversible left or right hand swing locking/latching front door for added security
- Bag of 50 mounting screws included
   
  Thermal Management
- Engineered to facilitate passive thermal management
- Ships with front rackrail at 4” setback position to accommodate cable managers
- Large opening in backpan for mounting over pull boxes, electrical outlets, etc. knockouts for conduit & cable entry.
   
  Regulatory / Certifications
- Welded construction provides a 200 lb. weight capacity
- UL Listed in the US and Canada
- GREENGUARD Indoor Air Quality Certified for-  Children and Schools (the most strict level)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Consider an EWR wall cabinet when installing smaller systems and an economical solution is required. This pivoting, sectional wall cabinet provides unparalleled quality at an aggressive price and is ideal for use in both secured and non-secured areas

  Structural Features:
- Tool-Free Quick-Mount™ system for easy one-person mounting of the center section to the backpan on the jobsite
- Welded construction provides a 150lb weight capacity
- Models available with solid locking front door
- Finished in a durable black textured powder coat
- Standard 3 position front 1/8", 5/8", and 1 1/8" adjustable 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting
- Reversible padlockable center section keyed separately from optional front door

  Thermal Management
- Vented to facilitate optimum Passive thermal management

  Cable Management
- 1/2", 3/4", 1" and 1 1/2" electrical knockouts and UHF/VHF antenna knockouts on top and bottom of backpan
- Abundant lacing points throughout the interior facilitate cable management
- Large opening in backpan provides a 10 1/2" x 10 1/2" pull-box sized opening for convenient cable passage

  Code Compliancy
- UL Listed in the US and Canada

17" Deep(15" Useable)
Racking Height: 17 1/2" (10 space)
Weight Capacity: 150
Overall Height: 24 1/2"

* Not eligible for Free Shipping

Reviews

Write a review | No reviews for this product.
Prev 1 2 3 4 5 Next