Jonard force gauges are all ergonomically designed and have become the industry standard for measuring force. Our 3 different lines of force gauges are used by a multitude of industries and these gauges are being used in over 1000 different applications for measuring, calibrating, standardizing, testing and evaluating.

Measurement is extremely simple. Just place point of gauge arm perpendicular to the force to measured. Reading can be taken in both directions - clockwise and counter-clockwise. Gauges offer extreme precision and durability. The measuring springs are made of hard tempered annealed beryllium copper. All gauged equipped with maximum reading pointer. Tolerance ± .01 (Reading + maximum scale Reading)

Part # GD-100,
Range in Grams 100-1000,
Graduation in Grams 50.00

Jonard force gauges are all ergonomically designed and have become the industry standard for measuring force. Our 3 different lines of force gauges are used by a multitude of industries and these gauges are being used in over 1000 different applications for measuring, calibrating, standardizing, testing and evaluating.

Measurement is extremely simple. Just place point of gauge arm perpendicular to the force to measured. Reading can be taken in both directions - clockwise and counter-clockwise. Gauges offer extreme precision and durability. The measuring springs are made of hard tempered annealed beryllium copper. All gauged equipped with maximum reading pointer. Tolerance ± .01 (Reading + maximum scale Reading)

Part # GD-200,
Range in Grams 200-2000,
Graduation in Grams 50.00

Jonard force gauges are all ergonomically designed and have become the industry standard for measuring force. Our 3 different lines of force gauges are used by a multitude of industries and these gauges are being used in over 1000 different applications for measuring, calibrating, standardizing, testing and evaluating.

Measurement is extremely simple. Just place point of gauge arm perpendicular to the force to measured. Reading can be taken in both directions - clockwise and counter-clockwise. Gauges offer extreme precision and durability. The measuring springs are made of hard tempered annealed beryllium copper. All gauged equipped with maximum reading pointer. Tolerance ± .01 (Reading + maximum scale Reading)

Part # GD-400,
Range in Grams 400-4000,
Graduation in Grams 100.0

These high polystyrene cased instruments accurately measure push pull forces. Gauges is graduated in two scales: grams and ounces. Precision springs. Full scale accuracy is held to ± 1 graduation. Size: 1 1/2" wide x 1" deep x 14" long

Part # GPP-8,
Avoirdupois Capacity 8 oz. x 0.25 oz.,
Metric Capacity 220g x 5g

These high polystyrene cased instruments accurately measure push pull forces. Gauges is graduated in two scales: grams and ounces. Precision springs. Full scale accuracy is held to ± 1 graduation. Size: 1 1/2" wide x 1" deep x 14" long

Part # GPP-36,
Avoirdupois Capacity 36 oz. x 0.5 oz.,
Metric Capacity 1020g x 20g

These high polystyrene cased instruments accurately measure push pull forces. Gauges is graduated in two scales: grams and ounces. Precision springs. Full scale accuracy is held to ± 1 graduation. Size: 1 1/2" wide x 1" deep x 14" long

Part # GPP-72,
Avoirdupois Capacity 72 oz. x 1 oz.,
Metric Capacity 2025g x 25g

These high polystyrene cased instruments accurately measure push pull forces. Gauges is graduated in two scales: grams and ounces. Precision springs. Full scale accuracy is held to ± 1 graduation. Size: 1 1/2" wide x 1" deep x 14" long

Part # GPP-15,
Avoirdupois Capacity 15 lbs. x 4 oz.,
Metric Capacity 6804g x 100g

Precision, compact tubular-type mechanical force gauge slender shape permits its use in confined areas. Gauges is graduated in two scales: grams and ounces. Precision springs individually are calibrated,. Full scale accuracy and permanent calibration is held to ± 1 graduation. Construction is brass with satin chrome finish. Size: 1/2" diameter x 15" long.

Part # GPP-5,
Avoirdupois Capacity 1 lbs. x 1 oz.,
Metric Capacity 500g x 50g

Quickly threads wire and cable through cavity walls and void spaces. Threads at an angle and safely through other wire and cable obstacles. Saves time, saves money, and sharply reduces the risk of accidents.

To use the MM-800 follow these four simple steps:

1. Drill a hole and remove the dust and debris.
2. Next simply place the MM-800 specially designed magnetic rod through the hole you wish to snake the wire.
3. Screw on the appropriate magnetic cap to the cable or wire end and align the magnets.
4. Push the cable into the hole and through the other side of the wall. That's it!
* 44% TIME SAVINGS Six Sigma certified
* Dramatically reduces shock risk
* Easy to use - No experience required
* Diamond Award Winning Design

Each MM-800 Kit Contains: 1 magnetic rod, 2 magnetic extensions and 5 magnetic caps.

.169" to .205" (Red)
.236" to .259" (Green)
.145" to .169" (White)
.173" to .201" (Gray)
.205" to .232" (Black)

Quickly threads wire and cable through cavity walls and void spaces. Threads at an angle and safely through other wire and cable obstacles. Saves time, saves money, and sharply reduces the risk of accidents.

To use the MM-800 follow these four simple steps:

1. Drill a hole and remove the dust and debris.
2. Next simply place the MM-800 specially designed magnetic rod through the hole you wish to snake the wire.
3. Screw on the appropriate magnetic cap to the cable or wire end and align the magnets.
4. Push the cable into the hole and through the other side of the wall. That's it!

* 44% TIME SAVINGS Six Sigma certified
* Dramatically reduces shock risk
* Easy to use - No experience required
* Diamond Award Winning Design

Each MM-800 Kit Contains: 1 magnetic rod, 2 magnetic extensions and 5 magnetic caps.

.169" to .205" (Red)
.236" to .259" (Green)
.145" to .169" (White)
.173" to .201" (Gray)
.205" to .232" (Black)

Quickly threads wire and cable through cavity walls and void spaces. Threads at an angle and safely through other wire and cable obstacles. Saves time, saves money, and sharply reduces the risk of accidents.

To use the MM-800 follow these four simple steps:

1. Drill a hole and remove the dust and debris.
2. Next simply place the MM-800 specially designed magnetic rod through the hole you wish to snake the wire.
3. Screw on the appropriate magnetic cap to the cable or wire end and align the magnets.
4. Push the cable into the hole and through the other side of the wall. That's it!

* 44% TIME SAVINGS Six Sigma certified
* Dramatically reduces shock risk
* Easy to use - No experience required
* Diamond Award Winning Design

Each MM-800 Kit Contains: 1 magnetic rod, 2 magnetic extensions and 5 magnetic caps.

.169" to .205" (Red)
.236" to .259" (Green)
.145" to .169" (White)
.173" to .201" (Gray)
.205" to .232" (Black)

  Features:
- Hand-held analog VOM.
- Designed with the telco service person in mind.
- 16 ranges and functions.
- Polarity reversing switch.
- 3 year warranty.

The model 2001 includes all of the features of the Model 1000 with the addition of Cab Filters. The Model 2001 was designed for passenger railroads using 100Hz and 250Hz coding systems.

  Features:
- 100Hz and 250Hz Cab Filters.
- All Pass position - bypasses cab filters.
- Auto polarity in DC functions.
- Selectable EC Amps polarity.
- Direct measurement of code parameters.
- Relay contact on time (Dry Contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.

The model 2002 also includes all of the features of the Model 2000 with the addition of cab filters. The model 2002 was designed for rapid transit / commuter type railroads using 100Hz and 200Hz coding systems.

  Features:
- 100Hz and 200Hz cable filters.
- All Pass position - bypasses cab filters.
- Auto polarity in DC functions..
- Selectable DC amps functions.
- Selectable DC amps polarity.
- Direct measurement of code parameters.
- Relay contact on time (Dry Contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.

The Model 2003 also includes all of the features of the Model 2000 with the addition of cab filters. The model 2003 was designed for railroads using 60Hz and 100Hz coding systems.

  Features:
- 60Hz and 100Hz cab filters.
- All pass position - bypasses cable filters.
- Auto polarity in DC functions.
- Selectable DC Amps Polarity.
- Direct measurement of code parameters.
- Relay contact on time (dry contact) requires no adjustment.
- Ohmmeter voltage mode detects either polarity voltage including AC.
- Field replaceable protective window.