PrevSet Prev 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Next NextSet 

CLC 767 Plier Holder

CLC 767 Plier Holder

 
SKU: 767
Your Price: $510.90
 
 
  • Details
  • Reviews

- Top Grain Leather
- Fits narrow-type hand tools up to 10" long
- Molded leather retains shape
- Fits belts up to 2 1/4" wide
   
  Tools not included


Reviews

Write a review | No reviews for this product.
CLC 417 Plier/Tool Holder

CLC 417 Plier/Tool Holder

 
SKU: 417
Your Price: $96.30
 
 
  • Details
  • Reviews

- Top Grain Leather
- Molded, open-bottom design holds variety of tools
- Fits belts up to 2 3/4" wide
   
  Tools not included


Reviews

Write a review | No reviews for this product.
CLC 328 Economy Plier/Tool Holder

CLC 328 Economy Plier/Tool Holder

 
SKU: 328
Your Price: $5.60
 
 
  • Details
  • Reviews

- Top Grain Leather
- Fits narrow-type hand tools up to 10" long
- Fits belts up to 2 3/4" wide
   
  Tools not included


Reviews

Write a review | No reviews for this product.
CLC 449 Tool/Utility Knife Sheath

CLC 449 Tool/Utility Knife Sheath

 
SKU: 449
Your Price: $6.50
 
 
  • Details
  • Reviews

- Top Grain Leather
- Holds knives and narrow tools
- Fits belts up to 2" wide
   
  Tools not included


Reviews

Write a review | No reviews for this product.
CLC 439 Steel Loop Hammer Holder

CLC 439 Steel Loop Hammer Holder

 
SKU: 439
Your Price: $5.00
 
 
  • Details
  • Reviews

- Top Grain Leather
- Cradle design eliminates hammer pivoting
- Fits belts up to 2 3/4" wide
   
  Tools not included


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

- Top Grain Leather
- Molded leather retains shape
- Fits belts up to 2 3/4" wide
- Safety snap included.
   
  Tools not included


Reviews

Write a review | No reviews for this product.
Greenlee 200B-G Tone Probe

Tempo 200B-G Tone Probe

 
SKU: 200B-G
Your Price: $45.60
 
 
  • Details
  • Reviews

  Probe Specifications:
- Gain (nominal): 30 db
- Input Impedance (nominal) 100m§Ů
- Metal Tip Resistance: NA
- Plastic Tip Resistance 300§Ů
- Headset NA
- Battery 9VDC (NEDA 1604, JIS 006P, or IEC 6LR61
- Battery Life (nominal) >50 hours
- Length 231mm (9.0")
- Width 55mm (2.2")
- Depth 28mm (1.1")
- Weight 145g (5.2 oz)
- Operating/Storage Temperature 0°C to 50°C (32° F to 122°F)
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Reviews

Write a review | No reviews for this product.
PrevSet Prev 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Next NextSet