PrevSet Prev 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Next NextSet 

 
  • Details
  • Reviews

  Product Features:
- Three crimping head choices: EK1230L for industry “U” type dies with 1.20' (30 mm) opening, EK1240L for industry “U” type dies with 1.65' (42 mm) opening, and EK1240KL for Kearney PH2 type dies.
- Head designs result in lower weight and improved durability - tested to 50,000 crimp cycles.
- Two-speed pump to reduce cycle time.
- State of the art 18V lithium ion battery power reduces cycle time and provides 70% more cycles per charge. The pistol grip style tools utilize a 3.0 amp hour battery.
- Exclusive to Greenlee! The E12CCXL tools have a repeating retraction stop (RSR). On the first crimp, the operator can stop the retraction at any point, and then on subsequent crimp cycles the ram retracts automatically to the same position.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Lightweight, forward angled pistol handle provides much improved tool balance with a 360° rotating head.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Covered head models have two layers of PVC that total approximately 3/16' (4.8 mm) thick. The outer layer is black and the inner layer is red.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- CRIMPING DIE STYLE: U Style 12-Ton
- Crimping Force: 24,000 lbs. (106 kN)
- Length: 16-1/2” (419 mm)
- Width: 2-7/8 (73 mm)
- Depth: 14-1/2” (368 mm)
- Weight: 15 lbs. (6.8 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 90
 
 

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Three crimping head choices: EK1230L for industry “U” type dies with 1.20' (30 mm) opening, EK1240L for industry “U” type dies with 1.65' (42 mm) opening, and EK1240KL for Kearney PH2 type dies.
- Head designs result in lower weight and improved durability - tested to 50,000 crimp cycles.
- Two-speed pump to reduce cycle time.
- State of the art 18V lithium ion battery power reduces cycle time and provides 70% more cycles per charge. The pistol grip style tools utilize a 3.0 amp hour battery.
- Exclusive to Greenlee! The E12CCXL tools have a repeating retraction stop (RSR). On the first crimp, the operator can stop the retraction at any point, and then on subsequent crimp cycles the ram retracts automatically to the same position.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Lightweight, forward angled pistol handle provides much improved tool balance with a 360° rotating head.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Covered head models have two layers of PVC that total approximately 3/16' (4.8 mm) thick. The outer layer is black and the inner layer is red.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- CRIMPING DIE STYLE: U Style 12-Ton
- Crimping Force: 24,000 lbs. (106 kN)
- Length: 16-1/2” (419 mm)
- Width: 2-7/8 (73 mm)
- Depth: 14-1/2” (368 mm)
- Weight: 15 lbs. (6.8 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 90
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Three crimping head choices: EK1230L for industry “U” type dies with 1.20' (30 mm) opening, EK1240L for industry “U” type dies with 1.65' (42 mm) opening, and EK1240KL for Kearney PH2 type dies.
- Head designs result in lower weight and improved durability - tested to 50,000 crimp cycles.
- Two-speed pump to reduce cycle time.
- State of the art 18V lithium ion battery power reduces cycle time and provides 70% more cycles per charge. The pistol grip style tools utilize a 3.0 amp hour battery.
- Exclusive to Greenlee! The E12CCXL tools have a repeating retraction stop (RSR). On the first crimp, the operator can stop the retraction at any point, and then on subsequent crimp cycles the ram retracts automatically to the same position.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold. Lightweight, forward angled pistol handle provides much improved tool balance with a 360° rotating head.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Covered head models have two layers of PVC that total approximately 3/16' (4.8 mm) thick. The outer layer is black and the inner layer is red.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- CRIMPING DIE STYLE: U Style 12-Ton
- Crimping Force: 24,000 lbs. (106 kN)
- Length: 16-1/2” (419 mm)
- Width: 2-7/8 (73 mm)
- Depth: 14-1/2” (368 mm)
- Weight: 15 lbs. (6.8 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 90
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Slim profile and light weight permit one hand operation.
- Ram automatically retracts to signal that crimp is complete.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Crimping head rotates 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- Can be used with all industry “W” style crimping dies using the included 04292 die adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 15-3/4” (438 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6-1/2 lbs. (3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 100
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Slim profile and light weight permit one hand operation.
- Ram automatically retracts to signal that crimp is complete.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Crimping head rotates 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- Can be used with all industry “W” style crimping dies using the included 04292 die adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 15-3/4” (438 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6-1/2 lbs. (3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 100
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Slim profile and light weight permit one hand operation.
- Ram automatically retracts to signal that crimp is complete.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Crimping head rotates 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- Can be used with all industry “W” style crimping dies using the included 04292 die adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 15-3/4” (438 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6-1/2 lbs. (3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 100
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Slim profile and light weight permit one hand operation.
- Ram automatically retracts to signal that crimp is complete.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Crimping head rotates 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- Can be used with all industry “W” style crimping dies using the included 04292 die adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 15-3/4” (438 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6-1/2 lbs. (3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 100
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Slim profile and light weight permit one hand operation.
- Ram automatically retracts to signal that crimp is complete.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Crimping head rotates 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- Can be used with all industry “W” style crimping dies using the included 04292 die adapters.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 15-3/4” (438 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6-1/2 lbs. (3 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 100
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CRIMPING DIE STYLE: 22 SERIES 6-TON
(Not for use with Burndy 400, 500 and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all other sizes of Burndy and Penn-Union Lugs from 8AWG to 600)

  Product Features:
- Slim profile and light weight permit one hand operation.
- Crimping jaws automatically open to signal that crimp is complete.
- Crimping jaws can be opened in mid-cycle to adjust connector.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Interchangeable crimping jaws rotate 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- When equipped with CJD3 crimping jaws, can be used with all industry “W” style crimping dies.
- When equipped with CJK crimping jaws, can be used with Thomas & Betts “6Ton” crimping dies.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 18-1/2” (394 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6 lbs. (2.7 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 150
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CRIMPING DIE STYLE: 22 SERIES 6-TON
(Not for use with Burndy 400, 500 and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all other sizes of Burndy and Penn-Union Lugs from 8AWG to 600)

  Product Features:
- Slim profile and light weight permit one hand operation.
- Crimping jaws automatically open to signal that crimp is complete.
- Crimping jaws can be opened in mid-cycle to adjust connector.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Interchangeable crimping jaws rotate 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- When equipped with CJD3 crimping jaws, can be used with all industry “W” style crimping dies.
- When equipped with CJK crimping jaws, can be used with Thomas & Betts “6Ton” crimping dies.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 18-1/2” (394 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6 lbs. (2.7 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 150
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CRIMPING DIE STYLE: 22 SERIES 6-TON
(Not for use with Burndy 400, 500 and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all other sizes of Burndy and Penn-Union Lugs from 8AWG to 600)

  Product Features:
- Slim profile and light weight permit one hand operation.
- Crimping jaws automatically open to signal that crimp is complete.
- Crimping jaws can be opened in mid-cycle to adjust connector.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Interchangeable crimping jaws rotate 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- When equipped with CJD3 crimping jaws, can be used with all industry “W” style crimping dies.
- When equipped with CJK crimping jaws, can be used with Thomas & Betts “6Ton” crimping dies.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 18-1/2” (394 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6 lbs. (2.7 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 150
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CRIMPING DIE STYLE: 22 SERIES 6-TON
(Not for use with Burndy 400, 500 and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all other sizes of Burndy and Penn-Union Lugs from 8AWG to 600)

  Product Features:
- Slim profile and light weight permit one hand operation.
- Crimping jaws automatically open to signal that crimp is complete.
- Crimping jaws can be opened in mid-cycle to adjust connector.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Interchangeable crimping jaws rotate 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- When equipped with CJD3 crimping jaws, can be used with all industry “W” style crimping dies.
- When equipped with CJK crimping jaws, can be used with Thomas & Betts “6Ton” crimping dies.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 18-1/2” (394 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6 lbs. (2.7 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 150
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CRIMPING DIE STYLE: 22 SERIES 6-TON
(Not for use with Burndy 400, 500 and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all other sizes of Burndy and Penn-Union Lugs from 8AWG to 600)

  Product Features:
- Slim profile and light weight permit one hand operation.
- Crimping jaws automatically open to signal that crimp is complete.
- Crimping jaws can be opened in mid-cycle to adjust connector.
- Exclusive to Greenlee! Pressure monitoring that alerts the operator if the crimping force of the tool does not meet specifications. Now, contractors and utilities don’t need to worry if there tools are providing the proper crimp force.
- Exclusive to Greenlee! An integral LED light to illuminate the work area on all tools.
- Exclusive to Greenlee! Over molded tacky grip areas to make the tool easier and more comfortable to hold.
- Exclusive to Greenlee! Bio-degradable hydraulic oil
- Interchangeable crimping jaws rotate 350 degrees.
- UL and cUL classified from 8 AWG to 600 kcmil with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union copper code color-coded connectors when used with Greenlee KC22 crimping dies.
- UL & cUL classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code color-coded connectors when used with Greenlee KA22 crimping dies.
- When equipped with CJD3 crimping jaws, can be used with all industry “W” style crimping dies.
- When equipped with CJK crimping jaws, can be used with Thomas & Betts “6Ton” crimping dies.
- Tools include two batteries, molded carrying case, and choice of 120V, 12V, or 230V battery charger.
   
  Specifications:
- Crimping Force: 12,000 lbs. (53 kN)
- Length: 18-1/2” (394 mm)
- Width: 2-7/8 (73 mm)
- Depth: 4-1/2” (114 mm)
- Weight: 6 lbs. (2.7 kg)
- Battery: 18V 3.0 Ah Li-ion
- Est. Cycles per Charge: 150
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

  Product Features:
- Dieless indent style crimping head does not require interchangeable crimping dies.
- Crimping head rotates 350 degrees to get into tight locations
- Two-speed pump provides rapid crimping cycle time.
- Lightweight and strong fiberglass handles.
- Comes with a molded carrying case.
   
  Specifications:
- Overall Length: 26" (657mm)
- Crimping Head Width: 4-3/8" (111 mm)
- Weight: 15 lb. (7kg)
- Crimping Range: Copper Color Coded Lugs and Splices 4 AWG to 1000 kcmil*
- Aluminum Color Coded Lugs and Splices 6 AWG to 1000 kcmil*
- UL an cUL classified with Anderson, Burndy, Blackburn, Ilsco, Panduit, Penn-Union, Thomas & Betts, and Tyco customers.
  

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

CableIQ Main Wiremap Adapter (replacement part for lost or damaged unit)

Reviews

Write a review | No reviews for this product.
PrevSet Prev 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Next NextSet