110 Punchdown Blocks

Hubbell’s 110 Cross Connect system is a flexible, reliable and economical, high-density system that exceeds the ANSI/TIA/EIA-568-B.2 Category 5e component performance specifications. 110 systems are used to cross connect and manage communications equipment wiring in the telecommunications closet and main distribution frames or as a consolidation point. Specifically, 110 systems are for voice and data applications where limited space prevents the use of a relay rack, or when a permanent cost-effective solution is desired versus the modularity of a patch panel.

  Features:
- Cable access openings allow cables to be routed through wiring blocks directly to point of termination.
- Wiring blocks available with or without detachable legs which can be removed during or after termination.
- Field terminated patch plugs allow custom length patch cords to be assembled in the field.
- High definition color coding and tip and ring designation make conductor placement and termination simple.
- Complete Hubbell Labeling Solution includes software, laser-printable sheets, and clear covers (order separately).
- Provides a reliable, cost-effective, front terminated solution.
- Total interoperability with existing 110 systems.
- Flexible solution consisting of 50-, 100-, and 300-pair wiring blocks, 4- and 5-pair connecting blocks, and a complete line of accessories.

Hubbell’s 110 Cross Connect system is a flexible, reliable and economical, high-density system that exceeds the ANSI/TIA/EIA-568-B.2 Category 5e component performance specifications. 110 systems are used to cross connect and manage communications equipment wiring in the telecommunications closet and main distribution frames or as a consolidation point. Specifically, 110 systems are for voice and data applications where limited space prevents the use of a relay rack, or when a permanent cost-effective solution is desired versus the modularity of a patch panel.

  Features:
- Cable access openings allow cables to be routed through wiring blocks directly to point of termination.
- Wiring blocks available with or without detachable legs which can be removed during or after termination.
- Field terminated patch plugs allow custom length patch cords to be assembled in the field.
- High definition color coding and tip and ring designation make conductor placement and termination simple.
- Complete Hubbell Labeling Solution includes software, laser-printable sheets, and clear covers (order separately).
- Provides a reliable, cost-effective, front terminated solution.
- Total interoperability with existing 110 systems.
- Flexible solution consisting of 50-, 100-, and 300-pair wiring blocks, 4- and 5-pair connecting blocks, and a complete line of accessories.

Hubbell’s 110 Cross Connect system is a flexible, reliable and economical, high-density system that exceeds the ANSI/TIA/EIA-568-B.2 Category 5e component performance specifications. 110 systems are used to cross connect and manage communications equipment wiring in the telecommunications closet and main distribution frames or as a consolidation point. Specifically, 110 systems are for voice and data applications where limited space prevents the use of a relay rack, or when a permanent cost-effective solution is desired versus the modularity of a patch panel.

  Features:
- Cable access openings allow cables to be routed through wiring blocks directly to point of termination.
- Wiring blocks available with or without detachable legs which can be removed during or after termination.
- Field terminated patch plugs allow custom length patch cords to be assembled in the field.
- High definition color coding and tip and ring designation make conductor placement and termination simple.
- Complete Hubbell Labeling Solution includes software, laser-printable sheets, and clear covers (order separately).
- Provides a reliable, cost-effective, front terminated solution.
- Total interoperability with existing 110 systems.
- Flexible solution consisting of 50-, 100-, and 300-pair wiring blocks, 4- and 5-pair connecting blocks, and a complete line of accessories.

Hubbell’s 110 Cross Connect system is a flexible, reliable and economical, high-density system that exceeds the ANSI/TIA/EIA-568-B.2 Category 5e component performance specifications. 110 systems are used to cross connect and manage communications equipment wiring in the telecommunications closet and main distribution frames or as a consolidation point. Specifically, 110 systems are for voice and data applications where limited space prevents the use of a relay rack, or when a permanent cost-effective solution is desired versus the modularity of a patch panel.

  Features:
- Cable access openings allow cables to be routed through wiring blocks directly to point of termination.
- Wiring blocks available with or without detachable legs which can be removed during or after termination.
- Field terminated patch plugs allow custom length patch cords to be assembled in the field.
- High definition color coding and tip and ring designation make conductor placement and termination simple.
- Complete Hubbell Labeling Solution includes software, laser-printable sheets, and clear covers (order separately).
- Provides a reliable, cost-effective, front terminated solution.
- Total interoperability with existing 110 systems. - Flexible solution consisting of 50-, 100-, and 300-pair wiring blocks, 4- and 5-pair connecting blocks, and a complete line of accessories.

Leviton’s 110-Style Wiring Products are perfect for quick and easy cross connects in a minimum of space. Achieve top performance and network integrity at consolidation points, even at Category 6 levels. Building a cross-connect system for voice and data is effortless. eXtreme 6+ 110-Style Wiring Blocks are available in 96- and 288-Pair units, with or without legs for wall mount applications.

A full selection of patch cords is available for easy connection to network equipment. All units meet or exceed Category 6 transmission requirements.

All kits include C-4 clips.

Leviton’s 110-Style Wiring Products are perfect for quick and easy cross connects in a minimum of space. Achieve top performance and network integrity at consolidation points, even at Category 6 levels. Building a cross-connect system for voice and data is effortless. eXtreme 6+ 110-Style Wiring Blocks are available in 96- and 288-Pair units, with or without legs for wall mount applications.

A full selection of patch cords is available for easy connection to network equipment. All units meet or exceed Category 6 transmission requirements.

All kits include C-4 clips.

Used in building entrance facilities, telecommunications closets and equipment rooms to provide fixed cross-connections for voice, security and data applications—including high megabit applications when used with Category 5e rated cabling. Wall version mounts to walls or backboards in 50, 100 or 300 pair densities. Rack version mounts on 19" distribution frames or hinged wall-mount brackets

Used in building entrance facilities, telecommunications closets and equipment rooms to provide fixed cross-connections for voice, security and data applications—including high megabit applications when used with Category 5e rated cabling. Wall version mounts to walls or backboards in 50, 100 or 300 pair densities. Rack version mounts on 19" distribution frames or hinged wall-mount brackets

Used in building entrance facilities, telecommunications closets and equipment rooms to provide fixed cross-connections for voice, security and data applications—including high megabit applications when used with Category 5e rated cabling. Wall version mounts to walls or backboards in 50, 100 or 300 pair densities. Rack version mounts on 19" distribution frames or hinged wall-mount brackets

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.

Simplified ordering of a complete Category 6 or 5e, EIA 19” rack mount 110 cross connect field is facilitated by the use of Hubbell’s rack mount 110 Field Termination Kits.

6-110 and 110 Rack Mount Kits provide a reliable, cost-effective, front terminated solution to manage communications equipment wiring in the telecommunications room when front termination is desired over the modularity of a patch panel. Rear cable access holes and increased channel width on wiring blocks allows jacketed cable to be routed from behind the wiring block close to termination helping to maintain proper pair twist.

6-110 components exceed TIA/EIA-568-B.2-1 Category 6 component specifications to accommodate today’s high-performance cabling needs. 110 field termination kits are tested and verified to meet and exceed Category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

	Features:
-	Unique third hand locating pins hold panel in place on rack while installing screws.
-	Optional rear cable organizer (HC36WF) clips to the rear of the panel.
-	Rolled edge construction provides superior strength during termination.
-	Increased Pair Isolation on 6-110 wiring and connecting blocks provides for superior NEXT performance.
-	Compatible with Hubbell Labeling Software and laser-printable 110 paper label sheets.