- Manufactured to comply with FCC 68 guidelines; 50 microns of gold on the contacts
- Supports latest EIA/TIA cable system performance categories UL Listed

Steel Tape 50ft. x 1/8" x .060"

Steel Tape 100ft. x 1/8" x .060"

Steel Tape 200ft. x 1/8" x .060"

- Crimps on new eyelet or leader in minutes
- Includes Crimpmaster™ Crimp Tool and special die set
- Connection guaranteed to withstand 500 pounds
- Kit includes: Crimpmaster™ Crimp Tool frame, die set, two eyelets, two leaders and instant adhesive
- Additional eyelets, leaders and adhesive available

  Product Features:
- Polymer-based formula provides maximum tension reduction in high-stress electrical and cable-pulling operations
- Compatible with all cable types
- Cleans up easily with soap and water
- Remains stable over wide temperature range -- usable from 28°F to 180°F (-2°C to 82°C)
- Dries to a semi-fluid film that won't clog conduit
- Easy to apply by hand, brush, or pump
- Non-toxic, non-flammable, and non-corrosive

  Product Features:
- Polymer-based formula provides maximum tension reduction in high-stress electrical and cable-pulling operations
- Compatible with all cable types
- Cleans up easily with soap and water
- Remains stable over wide temperature range -- usable from 28°F to 180°F (-2°C to 82°C)
- Dries to a semi-fluid film that won't clog conduit
- Easy to apply by hand, brush, or pump
- Non-toxic, non-flammable, and non-corrosive

CrimpALL® crimp tool and five coax die sets in a rugged nylon pack with outer holster and strap for belt or wrist.

  Kit Contains:
- 8000 - CrimpALL / 8000 Crimper Frame Only
- 2045 - RG6, RG6 Quad Die, CrimpALL / 8000 & 1300 Series Crimper
- 2648 - HDTV Die - CrimpALL® / 8000 & 1300 Series
- 2649 - HDTV Die for CrimpALL® / 8000 & 1300 Series Crimpers
- 2653 - SMA, SMB BNC/TNC Die for CrimpALL® / 8000 & 1300 Series
- 2656 - RG8/11/213-CrimpALL® / 8000 & 1300 Series Crimper

Professional-quality crimping tool for insulated and non-insulated wire ferrules with a range of 20-10 AWG (0.5-6.0 mm²).

  Features:
- Ferrules' crimp conforms to DIN 46228 Pt. 1 and 4
- Ferrule insertion from the side of the tool
- Single tool for entire wire range (no additional dies are required)
- Durable steel construction for long life
- Ergonomic handles for low-effort operation

  Type:
- 20-10 AWG (.5-6 mm²) stranded wire

  Crimp Size:
- 20-10 Trapezoid

  Connector Style:
- DIN or US type wire ferrules

  Connector Type:
- Insulated & non-insulated wire ferrules

Professional-quality rotary crimping tool for insulated and non-insulated wire ferrules with a wire range of 24-10 AWG (0.25-6.0 mm²).

  Features:
- Rotating die for front or side ferrule insertion
- Crimps conform to EN 60947-1 & DIN 46228 Pt. 1 and 4
- Hardened steel die system for long life
- Single tool for entire wire range (no additional dies are required)
- Durable steel construction for long life
- Ergonomic handles for low-effort operation

Our newest wire strippers combine ergonomics and versatility! Strip 22-10 AWG wire and cable for the most common types: electrical wire, hook-up wire & multi-conductor cable. Also cuts flat cables.

  Features:
- Head/handles designed at optimum 22o angle to prevent awkward wrist bends
- Spring-loaded closure
- Contoured wire stripping areas precision ground for accuracy
- Non-scoring strip and smooth wire cutting
- Features screw cutter and wire loops embedded in frames
- Gripping jaws on front of tool
- Works on electrical wire household cable
- Not for use on steel or armored wire and cable

Our newest wire strippers combine ergonomics and versatility! Strip 22-10 AWG wire and cable for the most common types: electrical wire, hook-up wire & multi-conductor cable. Also cuts flat cables.

  Features:
- Head/handles designed at optimum 22o angle to prevent awkward wrist bends
- Spring-loaded closure
- Contoured wire stripping areas precision ground for accuracy
- Non-scoring strip and smooth wire cutting
- Features screw cutter and wire loops embedded in frames
- Gripping jaws on front of tool
- Works on electrical wire household cable
- Not for use on steel or armored wire and cable

Slit & strip round cables with .18" - 1.4" (4.5-35 mm) diameter.

  Features:
- Adjustable cutting depth
- Laser-trimmed, stainless steel blades

  Advantages:
- Eliminates need for 2 tools - works with .18" - 1.4" (4.5 - 35 mm) including 500-1200 MCM power cables
- Cable supported during use
- Cable support arm can be used to pry off thick insulation
- Spare blade included
- Great tool for mid-point taps

Our best all-in-one tool! Ultra-professional all-in-one crimping tools for Western Electric (WE)/ Stewart Stamping (SS)-type, 4-, 6- and 8-position modular plugs.
  Advantages:
- 4 crimp functions with a single tool without changing dies!
- Embedded cable cutter and stripper
- Advanced ratchet system
- Precision die-cast aluminum head
- Soft, rubber-embedded handles of more comfort

  Type:
- 26-24 AWG (.08 - .20 mm²) telephone and data cables

Connector Type:
RJ45 8-pin, RJ11 & RJ12 4- & 6-pin, RJ11-DEC 6-pin offset, RJ22 handset 4-pin

All-in-one crimping tool for Western Electric (WE)/Stewart Stamping (SS)-type, 4-, 6- and 8-position modular telephone plugs. Does everything from CAT-3 to CAT-6!

  Features:
- Crimps 4-position RJ22 handset connectors
- Crimps 4- and 6-position RJ11/RJ12 connectors
- Crimps 8-position RJ45 (non-keyed)
- Smooth, ratcheted design
- Built-in safety ratchet release
- Soft, rubber-embedded handles of more comfort

  Advantages:
- Crimp RJ11/12 phone, RJ45 data and RJ22 handset plugs with a single tool!
- Comfortable rubber-embedded handles with hand stops
- Embedded cable cutter and stripper for both round data and flat satin phone cables
- Crimps 28-22 AWG (.08 - .34 mm²) telephone and data cables