Specifications
-	14 gauge cold rolled steel
-	Hinged or lift-off cover
-	Black powder coated
	Installation
-	Two-piece vertical construction (VS7xx)
-	Best fit with HSx3C

 

- Comprehensive assortment of grounding options.
- Easy to use.
- Pre-configured kits.
- Pre terminated leads.

  Delivery:
- Ground bar with 1/4" - 20 male studs
- (2) 1/4" - 20 carriage bolts and isolating hardware
- (2) ground straps

- Comprehensive assortment of grounding options.
- Easy to use.
- Pre-configured kits.
- Pre terminated leads.

  Delivery:
- 1 Ground strap with connectors attached

Use to field install a screw terminal/connection point in braided strap, service wire, or cable shield.

- Comprehensive assortment of grounding options.
- Easy to use.
- Pre-configured kits.
- Pre terminated leads.

  Delivery:
- 100 SHIELDBOND connectors
- 1 Field installation tool kit

-	Top Grain Leather
-	Fits most 1/4" - 3/8" drills
-	Center-balanced design counters battery weight
-	2 Front Pockets hold drill bits, pencils, etc.
-	Hook & loop safety strap
-	Fits belts up to 2 1/2" wide.
	Tools not included

-	Top Grain Leather
-	Fits narrow-type hand tools up to 10" long
-	Molded leather retains shape
-	Fits belts up to 2 1/4" wide
	Tools not included

-	Top Grain Leather
-	Molded, open-bottom design holds variety of tools
-	Fits belts up to 2 3/4" wide
	Tools not included

-	Top Grain Leather
-	Fits narrow-type hand tools up to 10" long
-	Fits belts up to 2 3/4" wide
	Tools not included

-	Top Grain Leather
-	Holds knives and narrow tools
-	Fits belts up to 2" wide
	Tools not included

-	Top Grain Leather
-	Cradle design eliminates hammer pivoting
-	Fits belts up to 2 3/4" wide
	Tools not included

-	Top Grain Leather
-	Molded leather retains shape
-	Fits belts up to 2 3/4" wide
-	Safety snap included.
	Tools not included

A complete data cable installation kit providing everything to support the installer using commonly-available connectors, and punchdown termination blocks. All tools contained in a professional-quality, soft-sided zipper case with heavy-duty wrist strap.

  Kit Contains:
- 1116 Data SureStrip™ Cat5e, Cat6, Phone Cutter/Stripper
- 1923 Untwist Tool
- 8000 Ergonomic CrimpALL/8000 Crimper Frame Only
- 2061 RJ45 WE/SS Die (8P8C)
- 2062 RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C)
- 2063 RJ22 Handset WE/SS Die (4P4C)
- 2064 RJ45 AMP Die (8P8C)
- 2067 RJ11 AMP DEC-MMJ Offset Die (6P6C)
- 3590 SurePunch® Pro PDT Handle & Light
- 4571 110/66 Blade - SurePunch® & SurePunch® Pro PDTs
- 4575 Krone LSA Blade for SurePunch® & SurePunch® PDTs
- 1543 LAN ProNavigator™ Tester

One-year warranty on kits; individual warranties apply to each tool

	Probe Specifications:
-	Gain (nominal): 30 db
-	Input Impedance (nominal) 100m§Ů
-	Metal Tip Resistance: NA
-	Plastic Tip Resistance 300§Ů
-	Headset NA
-	Battery 9VDC (NEDA 1604, JIS 006P, or IEC 6LR61
-	Battery Life (nominal) >50 hours
-	Length 231mm (9.0")
-	Width 55mm (2.2")
-	Depth 28mm (1.1")
-	Weight 145g (5.2 oz)
-	Operating/Storage Temperature 0°C to 50°C (32° F to 122°F)

  

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)