PrevSet Prev 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Next NextSet
| |
Vertical wire retainer, 8" channel
|
|
| |
Vertical slack loop organizer, 8" channel
|
|
| |
Vertical 80 L, 5W x 4D Channel w/standard snap-on black cover, front only
|
|
| |
Vertical 80 L, 5W x 4D Channel w/standard snap-on black cover, front & back
|
|
| |
Vertical 40 L, 5W x 4D Channel w/standard snap-on black cover, front only
|
|
| |
Vertical 40 L, 5W x 4D Channel w/standard snap-on black cover, front & back
|
|
| |
The NOYES OFL280 FlexTester family offers an unmatched
combination of fiber optic test functions, ease-of-use,
portability, and value. All OFL280 FlexTester models
include an integrated single-mode 1310/1550 nm OTDR with
PON-optimized and standard test modes, optical power
meter, 1310/1550 nm laser
source, and visual fault locator.
For many users the two-wavelength OFL280-100 will
provide the best balance of functionality and value.
Testing at 1310 and 1550 nm is normally sufficient to
certify point-to-point or FTTx PON fibers and allows the
detection of macro bends. The three wavelength
OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm
respectively. Testing at 1625 nm allows testing of the L
band. Testing at 1490 nm is required by some network
operators to certify FTTx PONs. The filtered,
three-wavelength OFL280-103 can certify dark fibers at
1310/1550 nm, faultlocate live FTTx PON fibers at 1625
nm, and measure FTTx power levels at 1490 and 1550 nm,
all from a single test port.
The OFL280 FlexTester user interface provides operating
modes suitable for a wide range of users and features a
top-down menu structure that is both easy to learn and a
pleasure to use. OTDR test results may be saved as
industry standard SOR files, which can be transferred to
a PC for viewing, printing, and analysis using supplied
Windowsฎ compatible software.
| |
Applications |
|
- |
PON OTDR - FTTx PON
construction certification |
|
- |
Live Fiber OTDR - FTTx service
turn-up and troubleshooting |
|
- |
Full Auto OTDR - Normal (point-to
point) fiber cable construction testing and fault
location |
|
- |
Expert OTDR - Full function OTDR
for experienced users |
|
- |
Real-Time OTDR - Fault location,
splice verification, first connector checker |
|
- |
End Locator - Quickly locate
breaks or measure fiber length |
|
- |
Optical Power Meter - Measure
optical power or fiber loss |
|
- |
Laser Source - Measure end-to-end
loss or trace fibers using the tone feature and a
NOYES OFI |
|
- |
Visual Fault Locator -
Visible red laser for fiber bend/break location and
tracing |
| |
Features |
|
-
|
Rugged, hand-held and light weight (0.8 kg / 1.8 lb) |
|
-
|
Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON
meter all from the same test port |
|
-
|
0.8 m event dead zone, 3.5 m attenuation dead zone |
|
-
|
34 dB dynamic range |
|
-
|
Fast Real Time OTDR mode |
|
-
|
Internal storage (>1000 OTDR traces in .SOR format) |
|
-
|
High-contrast display is clear and bright in any
lighting condition, including direct sunlight |
|
-
|
Transfer test results to a PC via USB |
|
-
|
10-hour operation, fast charge, Li-Ion battery |
|
-
|
Short power-on time (<5 sec) |
|
-
|
Easy to learn and use |
| |
|
|
OFL280 Models |
| |
Features |
|
-100 |
-101 |
-102 |
-103 |
| |
Compatible with all NOYES optical
power meters and laser sources (OPM/OLS), including
tone and Wave ID features |
|
|
|
|
|
| |
Compatible with NOYES optical
fiber identifiers (OFI) |
|
|
|
|
|
| |
Integrated hi-power optical power
meter |
|
|
|
|
|
| |
Integrated visual fault locator
(red laser) |
|
|
|
|
|
| |
1310 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1550 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1490 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1625 nm OTDR, PON OTDR |
|
|
|
|
|
| |
1625 nm FTTx live fiber OTDR
with filtered detector for in-service PON testing |
|
|
|
|
|
| |
1490/1550 nm FTTx PON Meter
(Detects and measures downstream PON power levels) |
|
|
|
|
|
|
|
| |
The NOYES OFL280 FlexTester family offers an unmatched
combination of fiber optic test functions, ease-of-use,
portability, and value. All OFL280 FlexTester models
include an integrated single-mode 1310/1550 nm OTDR with
PON-optimized and standard test modes, optical power
meter, 1310/1550 nm laser
source, and visual fault locator.
For many users the two-wavelength OFL280-100 will
provide the best balance of functionality and value.
Testing at 1310 and 1550 nm is normally sufficient to
certify point-to-point or FTTx PON fibers and allows the
detection of macro bends. The three wavelength
OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm
respectively. Testing at 1625 nm allows testing of the L
band. Testing at 1490 nm is required by some network
operators to certify FTTx PONs. The filtered,
three-wavelength OFL280-103 can certify dark fibers at
1310/1550 nm, faultlocate live FTTx PON fibers at 1625
nm, and measure FTTx power levels at 1490 and 1550 nm,
all from a single test port.
The OFL280 FlexTester user interface provides operating
modes suitable for a wide range of users and features a
top-down menu structure that is both easy to learn and a
pleasure to use. OTDR test results may be saved as
industry standard SOR files, which can be transferred to
a PC for viewing, printing, and analysis using supplied
Windowsฎ compatible software.
| |
Applications |
|
- |
PON OTDR - FTTx PON
construction certification |
|
- |
Live Fiber OTDR - FTTx service
turn-up and troubleshooting |
|
- |
Full Auto OTDR - Normal (point-to
point) fiber cable construction testing and fault
location |
|
- |
Expert OTDR - Full function OTDR
for experienced users |
|
- |
Real-Time OTDR - Fault location,
splice verification, first connector checker |
|
- |
End Locator - Quickly locate
breaks or measure fiber length |
|
- |
Optical Power Meter - Measure
optical power or fiber loss |
|
- |
Laser Source - Measure end-to-end
loss or trace fibers using the tone feature and a
NOYES OFI |
|
- |
Visual Fault Locator -
Visible red laser for fiber bend/break location and
tracing |
| |
Features |
|
-
|
Rugged, hand-held and light weight (0.8 kg / 1.8 lb) |
|
-
|
Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON
meter all from the same test port |
|
-
|
0.8 m event dead zone, 3.5 m attenuation dead zone |
|
-
|
34 dB dynamic range |
|
-
|
Fast Real Time OTDR mode |
|
-
|
Internal storage (>1000 OTDR traces in .SOR format) |
|
-
|
High-contrast display is clear and bright in any
lighting condition, including direct sunlight |
|
-
|
Transfer test results to a PC via USB |
|
-
|
10-hour operation, fast charge, Li-Ion battery |
|
-
|
Short power-on time (<5 sec) |
|
-
|
Easy to learn and use |
| |
|
|
OFL280 Models |
| |
Features |
|
-100 |
-101 |
-102 |
-103 |
| |
Compatible with all NOYES optical
power meters and laser sources (OPM/OLS), including
tone and Wave ID features |
|
|
|
|
|
| |
Compatible with NOYES optical
fiber identifiers (OFI) |
|
|
|
|
|
| |
Integrated hi-power optical power
meter |
|
|
|
|
|
| |
Integrated visual fault locator
(red laser) |
|
|
|
|
|
| |
1310 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1550 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1490 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1625 nm OTDR, PON OTDR |
|
|
|
|
|
| |
1625 nm FTTx live fiber OTDR
with filtered detector for in-service PON testing |
|
|
|
|
|
| |
1490/1550 nm FTTx PON Meter
(Detects and measures downstream PON power levels) |
|
|
|
|
|
|
|
| |
The NOYES OFL280 FlexTester family offers an unmatched
combination of fiber optic test functions, ease-of-use,
portability, and value. All OFL280 FlexTester models
include an integrated single-mode 1310/1550 nm OTDR with
PON-optimized and standard test modes, optical power
meter, 1310/1550 nm laser
source, and visual fault locator.
For many users the two-wavelength OFL280-100 will
provide the best balance of functionality and value.
Testing at 1310 and 1550 nm is normally sufficient to
certify point-to-point or FTTx PON fibers and allows the
detection of macro bends. The three wavelength
OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm
respectively. Testing at 1625 nm allows testing of the L
band. Testing at 1490 nm is required by some network
operators to certify FTTx PONs. The filtered,
three-wavelength OFL280-103 can certify dark fibers at
1310/1550 nm, faultlocate live FTTx PON fibers at 1625
nm, and measure FTTx power levels at 1490 and 1550 nm,
all from a single test port.
The OFL280 FlexTester user interface provides operating
modes suitable for a wide range of users and features a
top-down menu structure that is both easy to learn and a
pleasure to use. OTDR test results may be saved as
industry standard SOR files, which can be transferred to
a PC for viewing, printing, and analysis using supplied
Windowsฎ compatible software.
| |
Applications |
|
- |
PON OTDR - FTTx PON
construction certification |
|
- |
Live Fiber OTDR - FTTx service
turn-up and troubleshooting |
|
- |
Full Auto OTDR - Normal (point-to
point) fiber cable construction testing and fault
location |
|
- |
Expert OTDR - Full function OTDR
for experienced users |
|
- |
Real-Time OTDR - Fault location,
splice verification, first connector checker |
|
- |
End Locator - Quickly locate
breaks or measure fiber length |
|
- |
Optical Power Meter - Measure
optical power or fiber loss |
|
- |
Laser Source - Measure end-to-end
loss or trace fibers using the tone feature and a
NOYES OFI |
|
- |
Visual Fault Locator -
Visible red laser for fiber bend/break location and
tracing |
| |
Features |
|
-
|
Rugged, hand-held and light weight (0.8 kg / 1.8 lb) |
|
-
|
Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON
meter all from the same test port |
|
-
|
0.8 m event dead zone, 3.5 m attenuation dead zone |
|
-
|
34 dB dynamic range |
|
-
|
Fast Real Time OTDR mode |
|
-
|
Internal storage (>1000 OTDR traces in .SOR format) |
|
-
|
High-contrast display is clear and bright in any
lighting condition, including direct sunlight |
|
-
|
Transfer test results to a PC via USB |
|
-
|
10-hour operation, fast charge, Li-Ion battery |
|
-
|
Short power-on time (<5 sec) |
|
-
|
Easy to learn and use |
| |
|
|
OFL280 Models |
| |
Features |
|
-100 |
-101 |
-102 |
-103 |
| |
Compatible with all NOYES optical
power meters and laser sources (OPM/OLS), including
tone and Wave ID features |
|
|
|
|
|
| |
Compatible with NOYES optical
fiber identifiers (OFI) |
|
|
|
|
|
| |
Integrated hi-power optical power
meter |
|
|
|
|
|
| |
Integrated visual fault locator
(red laser) |
|
|
|
|
|
| |
1310 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1550 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1490 nm OTDR, PON OTDR, laser
source (CW, wave ID, tone) |
|
|
|
|
|
| |
1625 nm OTDR, PON OTDR |
|
|
|
|
|
| |
1625 nm FTTx live fiber OTDR
with filtered detector for in-service PON testing |
|
|
|
|
|
| |
1490/1550 nm FTTx PON Meter
(Detects and measures downstream PON power levels) |
|
|
|
|
|
|
|
| |
AFL 2900-50-0002MR FC adapter, OTDR/OLS port
Reviews
AFL 2900-50-0002MR FC adapter, OTDR/OLS port1 1 reviews
Write a review | Read all reviewsFeatured positive reviews:
AFL 2900-50-0002MR FC adapter, OTDR/OLS port
2900-50-0002MR adapter
03/01/2016
By shahriar mokhtarzad
It was received on time, quality is very good at a good price.
|
|
| |
AFL 2900-50-0003MR SC adapter, OTDR/OLS port
|
|
| |
AFL 2900-50-0004MR ST adapter, OTDR/OLS port
|
|
| |
AFL 2900-50-0006MR LC adapter, OTDR/OLS port
|
|
| |
AFL 2900-52-0001MR FC adapter, OPM port
|
|
| |
AFL 2900-52-0002MR SC adapter, OPM port
|
|
PrevSet Prev 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Next NextSet
|
