PrevSet Prev 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 Next NextSet
|
1 YR GOLD for MFTK1200, MFTK1400
|
|
|
These universal adapter caps fit all current models of OWL optical power
meters. The U2.5-4 connects to 2.5mm connectors such
as ST, SC, and FC, and the U1.25-4 connects to LC, MU, and other 1.25mm
SFF connectors.
- |
OWL optical power meters take advantage of a flexible universal
connector port system which allows multiple fiber optic connector styles to connect to the same port. Fiber optic connector ferrules
come in two common sizes: 2.5mm (for ST, SC, FC, etc.) or
1.25mm (LC, MU, and other SFF connectors). A universal adapter cap is
available for each ferrule size. |
- |
What gives our universal port its flexibility is that only the
ferrule is inserted into the port. Since there is no latching
mechanism to
speak of, most connectors can connect to this port as long as the
ferrule size matches the adapter cap. |
- |
Each cap is designed so that once the ferrule is completely
inserted, the cone of light from a fiber connector falls completely
onto
the photo detector, regardless of how the connector may turn, twist, or
wiggle in the port. Because of this, you can be assured that
the optical power reading will always be accurate. |
-
|
By allowing connection to multiple connector types, OWL’s universal
port method minimizes costs and maintenance requirements. |
|
|
|
These universal adapter caps fit all current models of OWL optical power
meters. The U2.5-4 connects to 2.5mm connectors such
as ST, SC, and FC, and the U1.25-4 connects to LC, MU, and other 1.25mm
SFF connectors.
- |
OWL optical power meters take advantage of a flexible universal
connector port system which allows multiple fiber optic connector styles to connect to the same port. Fiber optic connector ferrules
come in two common sizes: 2.5mm (for ST, SC, FC, etc.) or
1.25mm (LC, MU, and other SFF connectors). A universal adapter cap is
available for each ferrule size. |
- |
What gives our universal port its flexibility is that only the
ferrule is inserted into the port. Since there is no latching
mechanism to
speak of, most connectors can connect to this port as long as the
ferrule size matches the adapter cap. |
- |
Each cap is designed so that once the ferrule is completely
inserted, the cone of light from a fiber connector falls completely
onto
the photo detector, regardless of how the connector may turn, twist, or
wiggle in the port. Because of this, you can be assured that
the optical power reading will always be accurate. |
-
|
By allowing connection to multiple connector types, OWL’s universal
port method minimizes costs and maintenance requirements. |
|
|
|
- |
Base unit with Cab Filters |
- |
Upgradable to 2001, 2002 or 2003 |
- |
Auto Polarity in DC functions |
- |
Selectable DC Amps Polarity |
- |
Direct measurement of Code Parameters |
- |
Relay Contact On Time (dry contact) requires no adjustment |
- |
Ohmmeter Voltage Mode detects either polarity voltage including AC |
- |
Field replaceable protective window |
|
|
|
|
Features |
|
|
- |
37 measurement ranges |
- |
3 3/4 digit resolution |
- |
4000 count display |
- |
Auto power off |
- |
Low battery indicator |
- |
Auto polarity |
- |
Capacitance range |
- |
Resistance range |
- |
Frequency range |
- |
AC/DC current range |
- |
Shock absorbing case |
- |
Overload protection |
- |
Built-in stand |
- |
Test leads attached to unit |
- |
Voltage range up to 600V |
- |
3 year limited warranty |
|
|
|
|
|
Specifications
|
|
|
- |
DC Voltage up to 600V |
- |
AC Voltage up to 600V |
- |
DC Current up to 400mA |
- |
AC Current up to 400mA |
- |
Resistance (Ohms) 400 to 4M |
- |
Diode Test |
- |
Capacitance 40nF to 100uF |
- |
Continuity Test |
- |
Frequency Range 10Hz to 10KHz |
- |
Dimensions: 3 x 5 x 1 in |
- |
Overload protection |
|
- CAT I & II 600V AC/DC |
|
- Ohms ranges: N/A |
|
- Diode Test: N/A |
|
- Continuity: N/A |
|
- Fuses: uA, Ma N/Ae |
|
- Agency Approval CE |
|
- |
Weight: 0.25 lbs. |
- |
Battery life: 150 hours (2-LR-44) |
|
|
|
|
Product Features: |
- |
Fiber Optic Power Meter & Light Source - four wavelength power meter for multimode and single mode testing, and
850nm multimode LED light source. |
- |
Calibration Function - stores reference power level for quick dB loss measurements
eliminating the need to manually calculate loss. |
- |
Save
Time and Money - power meter features 2.5mm universal and FC
adapters, light source includes ST, SC and FC adapters to test the
most common interfaces. |
- |
Ready for
FTTx - 1490nm measurement wavelength for use with nearly all single
mode Fiber To The Home applications. |
- |
Designed for the Field - Unique "docking" light source and easy three button
operation make this the perfect fiber tester for use in the field. |
|
Includes: |
- |
Power meter, 4 wavelength with universal 2.5mm
and fixed FC adapter |
- |
Light source, 850, 1300, 1310, 1550nm |
- |
2x FC-SC 62.5µm multimode cables |
- |
1 SC calibration coupler |
- |
Carrying case |
- |
English, Spanish, German, French, Portuguese,
Italian and Chinese user's manual |
|
Power Meter
Specifications: |
|
|
Wavelength |
|
850, 1300/1310, 1490, 1550nm |
|
Detector |
|
InGaAs |
|
Measurement Range |
|
-60 to +3dBm |
|
Accuracy |
|
±5% |
|
Display resolution |
|
0.01 |
|
Connector |
|
Universal 2.5mm w/FC adapter |
|
Power Supply |
|
AAA alkaline battery x 3 |
|
Operating Time |
|
360 hours |
|
Operating Temp |
|
-10 to +60°C |
|
Storage Temp
|
|
-25 to +70°C
|
|
Light Source
Specifications: |
|
|
|
Wavelength |
|
850nm LED |
|
Output Power |
|
-6 to -7 dBm typical |
|
Stability |
|
0.05dB after 15min, 0.1dB over 8 hrs |
|
Connector |
|
2.5mm w/ ST, SC, FC adapters |
|
Power Supply |
|
AAA alkaline battery x 3 |
|
Operating Time |
|
40 hours |
|
Operating Temp |
|
-10
to +60°C |
|
Storage Temp |
|
-25 to +70°C |
|
|
|
|
|
AFL FH-60-250 Fiber holders (250mm single fiber)
|
|
|
AFL FH-60-DC250 Fiber holders (250mm drop cable)
|
|
|
The FuseConnect Installation Kit is uniquely designed to extend the capability of fiber holder based fusion splicers beyond standard fiber splicing to field terminated connector splicing. The kit provides all items necessary to configure a splicer for field splicing of AFL FuseConnect field terminated connectors. The installation kits come equipped with all components necessary to handle 900 μm, 2 mm, and 3 mm cable. FuseConnect is compatible not only with Fujikura’s fusion splicers, but also with most other industryavailable, fiber holder-based fusion splicing platforms.— FUSE-ST-9U-MM62-6 FUSE-ST-9U-MM50-6 FUSE-ST-9U-MM50L-6
|
Applications |
- |
RF-overlay fttp network connectorization |
- |
Cable TV backbone network connectorization |
- |
Outside plant connectorization |
- |
Central office connector replacement |
- |
Data center installation |
- |
Mdu optical fiber termination |
|
KIT AFL # |
S014492 |
S014516 |
Splicer Compatibility |
18SR/60SR/ 50R/ 17R/ 17S-FH |
11S/11R |
Item |
Description |
Application |
SH-8C-23 |
SH-8C-43 |
Part # |
External Tube Heater |
SH-8C |
For FuseConnecto tube heating |
Included |
Included |
S014694 |
Fiber Holder |
FH-FC-3000 |
3mm cord clamp |
Included |
Included |
S014695 |
|
FH-FC-2000 |
2mm cord clamp |
Included |
Included |
S014696 |
|
FH-FC-900 |
0.9mm cord clamp |
Included |
Included |
S014697 |
DC Power Cord |
DCC-15 |
Connects SH-8C to BTA |
Included |
- |
S014698 |
|
DCC-17 |
Connects SH-8 to BTA-03 or DCA-02 |
- |
Included |
S014699 |
Hanger Plate |
HP-08 |
Attaches SH-8C to 50R/17S-FH/17R |
Included |
- |
S014700 |
|
HP-10 |
Attaches SH-8C to 18SR/60SR |
Included |
- |
S014701 |
Battery Adapter |
BTA-03 |
Attaches SH-8C to 11S/11R |
- |
Included |
S014702 |
Fiber Transfer Device |
FTD-01 |
To transfer from splice point to tube head device |
Included |
Included |
S014703 |
Cable Clamp |
CLAMP-FC-3000 |
For holding single 3mm cord (qty 2) |
Included |
Included |
S014704 |
|
CLAMP-FC-2000 |
For holding single 2mm cord (qty 2) |
Included |
Included |
S014705 |
|
|
|
|
The FuseConnect Installation Kit is uniquely designed to extend the capability of fiber holder based fusion splicers beyond standard fiber splicing to field terminated connector splicing. The kit provides all items necessary to configure a splicer for field splicing of AFL FuseConnect field terminated connectors. The installation kits come equipped with all components necessary to handle 900 μm, 2 mm, and 3 mm cable. FuseConnect is compatible not only with Fujikura’s fusion splicers, but also with most other industryavailable, fiber holder-based fusion splicing platforms.— FUSE-ST-9U-MM62-6 FUSE-ST-9U-MM50-6 FUSE-ST-9U-MM50L-6
|
Applications |
- |
RF-overlay fttp network connectorization |
- |
Cable TV backbone network connectorization |
- |
Outside plant connectorization |
- |
Central office connector replacement |
- |
Data center installation |
- |
Mdu optical fiber termination |
|
KIT AFL # |
S014492 |
S014516 |
Splicer Compatibility |
18SR/60SR/ 50R/ 17R/ 17S-FH |
11S/11R |
Item |
Description |
Application |
SH-8C-23 |
SH-8C-43 |
Part # |
External Tube Heater |
SH-8C |
For FuseConnecto tube heating |
Included |
Included |
S014694 |
Fiber Holder |
FH-FC-3000 |
3mm cord clamp |
Included |
Included |
S014695 |
|
FH-FC-2000 |
2mm cord clamp |
Included |
Included |
S014696 |
|
FH-FC-900 |
0.9mm cord clamp |
Included |
Included |
S014697 |
DC Power Cord |
DCC-15 |
Connects SH-8C to BTA |
Included |
- |
S014698 |
|
DCC-17 |
Connects SH-8 to BTA-03 or DCA-02 |
- |
Included |
S014699 |
Hanger Plate |
HP-08 |
Attaches SH-8C to 50R/17S-FH/17R |
Included |
- |
S014700 |
|
HP-10 |
Attaches SH-8C to 18SR/60SR |
Included |
- |
S014701 |
Battery Adapter |
BTA-03 |
Attaches SH-8C to 11S/11R |
- |
Included |
S014702 |
Fiber Transfer Device |
FTD-01 |
To transfer from splice point to tube head device |
Included |
Included |
S014703 |
Cable Clamp |
CLAMP-FC-3000 |
For holding single 3mm cord (qty 2) |
Included |
Included |
S014704 |
|
CLAMP-FC-2000 |
For holding single 2mm cord (qty 2) |
Included |
Included |
S014705 |
|
|
|
|
DSX CAT 6A/CLASS EA PLA Set
|
|
|
DSX TERA CAT 7A/CLASS FA PLA Set
|
|
|
DSX CAT 6A/CLASS EA CHA Set
|
|
PrevSet Prev 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 Next NextSet
|