The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

The Signamax 065-1050 series media converters are 10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE) devices that serve as Power Sourcing Equipment (PSE), which allows the converter to provide power to IEEE 802.3af PoE standard-compliant Powered Devices (PDs) using the twisted pair connection. This AC-powered PoE media converter combines data received over a fiber optic link with –48 Volt DC power, which the PD can use in lieu of a separate power connector. The 065-1050 series converters are also equipped with PD signature-sensing, power monitoring, over-current protection, under-current detection, and input fault protection features. The 065-1050 series’ Link Fault Signaling (LFS) capability allows the media converter to monitor both the fiber and copper RX ports for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Far End Fault (FEF) capability enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered; the link partner will then synchronously stop sending data, thereby preventing the loss of data that would occur when trying to transmit over a failed link.

The Signamax 065-1052 series media converters are PoE 10/100BaseT/TX to 100BaseFX Powered Devices supporting two types of media, 10/100BaseT/TX and 100BaseFX, for network connection. They are also equipped with Link Fault Signaling (LFS), to maintain link integrity and enable automatic failover when used with Spanning Tree-equipped switches.

  KEY FEATURES
- PoE, to Save Power Infrastructure Costs
- Link Fault Signaling (LFS) with Far End Fault
- DIP Switches for Setting PoE Configuration
- IEEE 802.3af PoE PSE (Power Source Equipment) Compatible (065-1050 series)
- Internal AC Power Supply (065-1050 series)
- Over-Current Protection & Under-Current Detection (065-1050 series)
- Minimum Load Sensing (065-1050 series)
- Fault Protection Input (065-1050 series)
- IEEE 802.3af PoE PD (Powered Device) compatible (065-1052 series)

Leviton’s eXtreme 10G Connectors exceed all channel performance requirements in TIA-568-B.2-10 from 1 MHz to 500MHz to support the IEEE 802.an standard for 10 Gigabit Ethernet over UTP Cable. Each 10G connector is designed to be used with all Leviton QuickPort® compatible products and features Leviton’s patented, injection molded Cone of Silence™ to provide a simple and effective method of eliminating alien crosstalk (AXT). Every 10G connector includes Leviton’s patented Retention Force Technology® (RFT) to promote consistent performance over the life of the system. Unique Pair Separation Towers facilitate quick, easy terminations. The connector is configured in a 180° configuration such that the punch down field is in the back, allowing for rear termination.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.

-	Exceed requirements of ANSI/TIA-568-C.2 Category 6, IEEE 802.3an-2006, and ISO 11801 Class E channel standards
-	Exceed requirements of ANSI/TIA-568-C.2 Category 6 and IEC 61156-5 Category 6 component standards
-	Meet requirements of IEEE 802.af and IEEE 802.3at for PoE applications
-	Each jack is 100% tested to ensure NEXT and RL performance and is individually serialized for traceability
-	Utilize patent-pending enhanced Giga-TX™Technology for jack terminations which optimizes performance by maintaining cable pair geometry and eliminating conductor untwist
-	Contacts plated with 50 microinches of gold for superior performance
-	No punchdown tool required; termination tool (EGJT) ensures conductors are fully terminated by utilizing a smooth forward motion without impact on critical internal components for maximum reliability
-	Optional termination tool (TGJT) reduces termination time by 25%, ideal for high volume installations
-	Can be re-terminated a minimum of twenty times
-	Off white termination cap designates Category 6 PLUS performance and provides positive strain relief; helps control cable bend radius and securely retains wires
-	Terminate 4-pair, 22 – 26 AWG, 100 ohm, solid or stranded twisted pair cable
-	Universal termination cap is color-coded for T568A and T568B wiring schemes
-	Accept 6 and 8-position modular plugs without damage
-	Can be clearly identified with optional labels and icons
-	Compatible with Mini-Com® Modular Patch Panels, Faceplates, and Surface Mount Boxes
-	Optional RJ45 Blockout device blocks out unauthorized access to jack modules and potentially harmful foreign objects, saving time and money associated with data security breaches, network downtime, repair and hardware replacement
-	Optional Dust cap keeps out dust and debris while not in use
*	To ensure optimal performance, Panduit recommends use with other Panduit® Category 6 PLUS components.