datacomtools.com

The NOYES OFL280 FlexTester family offers an unmatched combination of fiber optic test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

For many users the two-wavelength OFL280-100 will provide the best balance of functionality and value. Testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx PON fibers and allows the detection of macro bends. The three wavelength OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm respectively. Testing at 1625 nm allows testing of the L band. Testing at 1490 nm is required by some network operators to certify FTTx PONs. The filtered, three-wavelength OFL280-103 can certify dark fibers at 1310/1550 nm, faultlocate live FTTx PON fibers at 1625 nm, and measure FTTx power levels at 1490 and 1550 nm, all from a single test port.

The OFL280 FlexTester user interface provides operating modes suitable for a wide range of users and features a top-down menu structure that is both easy to learn and a pleasure to use. OTDR test results may be saved as industry standard SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible software.

	Applications
-	PON OTDR - FTTx PON construction certification
-	Live Fiber OTDR - FTTx service turn-up and troubleshooting
-	Full Auto OTDR - Normal (point-to point) fiber cable construction testing and fault location
-	Expert OTDR - Full function OTDR for experienced users
-	Real-Time OTDR - Fault location, splice verification, first connector checker
-	End Locator - Quickly locate breaks or measure fiber length
-	Optical Power Meter - Measure optical power or fiber loss
-	Laser Source - Measure end-to-end loss or trace fibers using the tone feature and a NOYES OFI
-	Visual Fault Locator - Visible red laser for fiber bend/break location and tracing

	Features
-	Rugged, hand-held and light weight (0.8 kg / 1.8 lb)
-	Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON meter all from the same test port
-	0.8 m event dead zone, 3.5 m attenuation dead zone
-	34 dB dynamic range
-	Fast Real Time OTDR mode
-	Internal storage (>1000 OTDR traces in .SOR format)
-	High-contrast display is clear and bright in any lighting condition, including direct sunlight
-	Transfer test results to a PC via USB
-	10-hour operation, fast charge, Li-Ion battery
-	Short power-on time (<5 sec)
-	Easy to learn and use

	OFL280 Models
Features	-100	-101	-102	-103
Compatible with all NOYES optical power meters and laser sources (OPM/OLS), including tone and Wave ID features	•	•	•	•
Compatible with NOYES optical fiber identifiers (OFI)	•	•	•	•
Integrated hi-power optical power meter	•	•	•	•
Integrated visual fault locator (red laser)	•	•	•	•
1310 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1550 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1490 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)			•
1625 nm – OTDR, PON OTDR		•		•
1625 nm – FTTx live fiber OTDR with filtered detector for in-service PON testing				•
1490/1550 nm – FTTx PON Meter (Detects and measures downstream PON power levels)				•

Reviews

Write a review | No reviews for this product.

AFL OFL280-101 1310, 1550, 1625 nm Dual-wavelength OTDR/Loss test set

SKU: OFL280-101

Your Price: $5,805.00

More info Add to Cart

Details
Reviews

The NOYES OFL280 FlexTester family offers an unmatched combination of fiber optic test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

For many users the two-wavelength OFL280-100 will provide the best balance of functionality and value. Testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx PON fibers and allows the detection of macro bends. The three wavelength OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm respectively. Testing at 1625 nm allows testing of the L band. Testing at 1490 nm is required by some network operators to certify FTTx PONs. The filtered, three-wavelength OFL280-103 can certify dark fibers at 1310/1550 nm, faultlocate live FTTx PON fibers at 1625 nm, and measure FTTx power levels at 1490 and 1550 nm, all from a single test port.

The OFL280 FlexTester user interface provides operating modes suitable for a wide range of users and features a top-down menu structure that is both easy to learn and a pleasure to use. OTDR test results may be saved as industry standard SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible software.

	Applications
-	PON OTDR - FTTx PON construction certification
-	Live Fiber OTDR - FTTx service turn-up and troubleshooting
-	Full Auto OTDR - Normal (point-to point) fiber cable construction testing and fault location
-	Expert OTDR - Full function OTDR for experienced users
-	Real-Time OTDR - Fault location, splice verification, first connector checker
-	End Locator - Quickly locate breaks or measure fiber length
-	Optical Power Meter - Measure optical power or fiber loss
-	Laser Source - Measure end-to-end loss or trace fibers using the tone feature and a NOYES OFI
-	Visual Fault Locator - Visible red laser for fiber bend/break location and tracing

	Features
-	Rugged, hand-held and light weight (0.8 kg / 1.8 lb)
-	Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON meter all from the same test port
-	0.8 m event dead zone, 3.5 m attenuation dead zone
-	34 dB dynamic range
-	Fast Real Time OTDR mode
-	Internal storage (>1000 OTDR traces in .SOR format)
-	High-contrast display is clear and bright in any lighting condition, including direct sunlight
-	Transfer test results to a PC via USB
-	10-hour operation, fast charge, Li-Ion battery
-	Short power-on time (<5 sec)
-	Easy to learn and use

	OFL280 Models
Features	-100	-101	-102	-103
Compatible with all NOYES optical power meters and laser sources (OPM/OLS), including tone and Wave ID features	•	•	•	•
Compatible with NOYES optical fiber identifiers (OFI)	•	•	•	•
Integrated hi-power optical power meter	•	•	•	•
Integrated visual fault locator (red laser)	•	•	•	•
1310 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1550 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1490 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)			•
1625 nm – OTDR, PON OTDR		•		•
1625 nm – FTTx live fiber OTDR with filtered detector for in-service PON testing				•
1490/1550 nm – FTTx PON Meter (Detects and measures downstream PON power levels)				•

Reviews

Write a review | No reviews for this product.

AFL OFL280-102 1310, 1490, 1550 nm Dual-wavelength OTDR/Loss test set

SKU: OFL280-102

Your Price: $5,805.00

More info Add to Cart

Details
Reviews

The NOYES OFL280 FlexTester family offers an unmatched combination of fiber optic test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

For many users the two-wavelength OFL280-100 will provide the best balance of functionality and value. Testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx PON fibers and allows the detection of macro bends. The three wavelength OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm respectively. Testing at 1625 nm allows testing of the L band. Testing at 1490 nm is required by some network operators to certify FTTx PONs. The filtered, three-wavelength OFL280-103 can certify dark fibers at 1310/1550 nm, faultlocate live FTTx PON fibers at 1625 nm, and measure FTTx power levels at 1490 and 1550 nm, all from a single test port.

The OFL280 FlexTester user interface provides operating modes suitable for a wide range of users and features a top-down menu structure that is both easy to learn and a pleasure to use. OTDR test results may be saved as industry standard SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible software.

	Applications
-	PON OTDR - FTTx PON construction certification
-	Live Fiber OTDR - FTTx service turn-up and troubleshooting
-	Full Auto OTDR - Normal (point-to point) fiber cable construction testing and fault location
-	Expert OTDR - Full function OTDR for experienced users
-	Real-Time OTDR - Fault location, splice verification, first connector checker
-	End Locator - Quickly locate breaks or measure fiber length
-	Optical Power Meter - Measure optical power or fiber loss
-	Laser Source - Measure end-to-end loss or trace fibers using the tone feature and a NOYES OFI
-	Visual Fault Locator - Visible red laser for fiber bend/break location and tracing

	Features
-	Rugged, hand-held and light weight (0.8 kg / 1.8 lb)
-	Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON meter all from the same test port
-	0.8 m event dead zone, 3.5 m attenuation dead zone
-	34 dB dynamic range
-	Fast Real Time OTDR mode
-	Internal storage (>1000 OTDR traces in .SOR format)
-	High-contrast display is clear and bright in any lighting condition, including direct sunlight
-	Transfer test results to a PC via USB
-	10-hour operation, fast charge, Li-Ion battery
-	Short power-on time (<5 sec)
-	Easy to learn and use

	OFL280 Models
Features	-100	-101	-102	-103
Compatible with all NOYES optical power meters and laser sources (OPM/OLS), including tone and Wave ID features	•	•	•	•
Compatible with NOYES optical fiber identifiers (OFI)	•	•	•	•
Integrated hi-power optical power meter	•	•	•	•
Integrated visual fault locator (red laser)	•	•	•	•
1310 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1550 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1490 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)			•
1625 nm – OTDR, PON OTDR		•		•
1625 nm – FTTx live fiber OTDR with filtered detector for in-service PON testing				•
1490/1550 nm – FTTx PON Meter (Detects and measures downstream PON power levels)				•

Reviews

Write a review | No reviews for this product.

AFL OFL280-103 1310, 1550, 1625 nm, Live Fiber filter, PON meter, Dual-wavelength OTDR/Loss test set

SKU: OFL280-103

Your Price: $6,320.00

More info Add to Cart

Details
Reviews

The NOYES OFL280 FlexTester family offers an unmatched combination of fiber optic test functions, ease-of-use, portability, and value. All OFL280 FlexTester models include an integrated single-mode 1310/1550 nm OTDR with PON-optimized and standard test modes, optical power meter, 1310/1550 nm laser source, and visual fault locator.

For many users the two-wavelength OFL280-100 will provide the best balance of functionality and value. Testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx PON fibers and allows the detection of macro bends. The three wavelength OFL280-101 and OFL280-102 models add 1625 nm or 1490 nm respectively. Testing at 1625 nm allows testing of the L band. Testing at 1490 nm is required by some network operators to certify FTTx PONs. The filtered, three-wavelength OFL280-103 can certify dark fibers at 1310/1550 nm, faultlocate live FTTx PON fibers at 1625 nm, and measure FTTx power levels at 1490 and 1550 nm, all from a single test port.

The OFL280 FlexTester user interface provides operating modes suitable for a wide range of users and features a top-down menu structure that is both easy to learn and a pleasure to use. OTDR test results may be saved as industry standard SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible software.

	Applications
-	PON OTDR - FTTx PON construction certification
-	Live Fiber OTDR - FTTx service turn-up and troubleshooting
-	Full Auto OTDR - Normal (point-to point) fiber cable construction testing and fault location
-	Expert OTDR - Full function OTDR for experienced users
-	Real-Time OTDR - Fault location, splice verification, first connector checker
-	End Locator - Quickly locate breaks or measure fiber length
-	Optical Power Meter - Measure optical power or fiber loss
-	Laser Source - Measure end-to-end loss or trace fibers using the tone feature and a NOYES OFI
-	Visual Fault Locator - Visible red laser for fiber bend/break location and tracing

	Features
-	Rugged, hand-held and light weight (0.8 kg / 1.8 lb)
-	Standard OTDR, PON OTDR, live fiber OTDR, and FTTx PON meter all from the same test port
-	0.8 m event dead zone, 3.5 m attenuation dead zone
-	34 dB dynamic range
-	Fast Real Time OTDR mode
-	Internal storage (>1000 OTDR traces in .SOR format)
-	High-contrast display is clear and bright in any lighting condition, including direct sunlight
-	Transfer test results to a PC via USB
-	10-hour operation, fast charge, Li-Ion battery
-	Short power-on time (<5 sec)
-	Easy to learn and use

	OFL280 Models
Features	-100	-101	-102	-103
Compatible with all NOYES optical power meters and laser sources (OPM/OLS), including tone and Wave ID features	•	•	•	•
Compatible with NOYES optical fiber identifiers (OFI)	•	•	•	•
Integrated hi-power optical power meter	•	•	•	•
Integrated visual fault locator (red laser)	•	•	•	•
1310 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1550 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)	•	•	•	•
1490 nm – OTDR, PON OTDR, laser source (CW, wave ID, tone)			•
1625 nm – OTDR, PON OTDR		•		•
1625 nm – FTTx live fiber OTDR with filtered detector for in-service PON testing				•
1490/1550 nm – FTTx PON Meter (Detects and measures downstream PON power levels)				•

Reviews

Write a review | No reviews for this product.

AFL OFL250-50U-ENG 1550 nm, single-mode OTDR

SKU: OFL250-50U-ENG

Your Price: $3,085.00

More info Add to Cart

Details
Reviews

The NOYES OFL250-50 is a 1550 nm single-mode OTDR with an integrated optical power meter (OPM), 1550 nm laser source (OLS), and visual fault locator (VFL) in a hand-held package weighing only 0.8 kg (1.8 lb). With short dead zone and midrange dynamic range performance, the OFL250-50 is ideal for troubleshooting dark single-mode fibers in local access, metro area, and FTTx networks.

The OFL250-50 provides automatic and manual setup, precision event analysis, 12-hour battery life, internal data storage, and USB connectivity. OTDR and OPM test ports are equipped with tool-free adapters, which can be changed in seconds.

OTDR test results are saved as industry standard .SOR files, which can be transferred to a PC for viewing, printing, and analyzing with the supplied Windows® compatible software.

	Features
-	Rugged, hand-held and light weight
-	1.5 m event dead zone
-	26 dB dynamic range
-	Integrated OPM, OLS, VFL
-	Tool-free, interchangeable adapters for OTDR and OPM ports
-	Internal storage (>1000 OTDR traces in standard .SOR format)
-	High-contrast display is clear and bright in any lighting condition, including direct sunlight
-	Transfer test results to a PC via USB
-	Rechargeable 12-hour Li-Ion battery or AC power
-	Windows® compatible software to view, print, and archive test records

	Applications
-	Locate cable cuts, open or high-loss splices, fiber bends, and high-loss/high-reflectance connections
-	Measure optical power and loss (OPM port)
-	Short-range fault-location (VFL port)
-	Trace fibers and measure end-to-end loss at 1550 nm (working with a NOYES optical power meter or light source)
-	Identify fibers (working with a NOYES optical fiber identifier)

	OFL250-50 OTDR
-	Carry case
-	(1) SC and (1) FC adapter for the OTDR/OLS port
-	2.5 mm adapter for the OPM and VFL ports
-	One-Click Cleaner SC/FC/ST (2.5mm)
-	USB cable (connects with Type A USB port on your PC)
-	AC power adapter