PrevSet Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 Next NextSet 

AFL 1420-35-0009PR CF slot cover

AFL 1420-35-0009PR CF slot cover

 
SKU: 1420-35-0009PR
Your Price: $20.00
 
 
  • Details
  • Reviews

AFL 1420-35-0009PR CF slot cover

Reviews

Write a review | No reviews for this product.
AFL 1400-01-0090PZ M700/C850 hard case

AFL 1400-01-0090PZ M700/C850 hard case

 
SKU: 1400-01-0090PZ
Your Price: $610.00
 
 
  • Details
  • Reviews

AFL 1400-01-0090PZ M700/C850 hard case

Reviews

Write a review | No reviews for this product.
AFL 3900-05-0004ME Li-ion battery

AFL 3900-05-0004ME Li-ion battery

 
SKU: 3900-05-0004ME
Your Price: $254.00
 
 
  • Details
  • Reviews

AFL 3900-05-0004ME Li-ion battery

Reviews

Write a review | No reviews for this product.
AFL 4050-30-0005MR Li-ion battery charger 90-260 VAC

AFL 4050-30-0005MR Li-ion battery charger 90-260 VAC

 
SKU: 4050-30-0005MR
Your Price: $312.00
 
 
  • Details
  • Reviews

AFL 4050-30-0005MR Li-ion battery charger 90-260 VAC

Reviews

Write a review | No reviews for this product.
"AFL 6000-00-0027MR Cable, USB-MINI B (connect to pc)"

AFL 6000-00-0027MR Cable, USB-MINI B (connect to pc)

 
SKU: 6000-00-0027MR
Your Price: $25.00
 
 
  • Details
  • Reviews

AFL 6000-00-0027MR Cable, USB-MINI B (connect to pc)

Reviews

Write a review | No reviews for this product.
AFL FTK1-01-0900PR FTK Pro Installer Kit

AFL FTK1-01-0900PR FTK Pro Installer Kit

 
SKU: FTK1-01-0900PR
Your Price: $13,715.00
 
 
  • Details
  • Reviews

The NOYES FTK Pro Installer Kit from AFL provides a wide selection of fiber optic testing, cleaning, and inspection equipment to enable technicians to install and maintain fiber optic networks. Available with multimode and single-mode test equipment, the kit also includes a broad array of cleaning and inspection equipment in a convenient tough injection-molded ABS carrying case. The Pro Installer Kit is ideal for TIA Tier 1 and Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTx PON networks.

  Features
- Clean, inspect, and test fiber optic networks
- Multimode and single-mode fiber ready
- Verify integrity of installed fiber networks
- Software to present network owners with written proof of a quality installation
- Convenient rugged hard carry case
   
  Applications
- Tier 1 and Tier 2 testing of premise networks
- FTTx PON certification and troubleshooting
- Fast fault location
- Splice verification
- Network documentation


  Kit Includes
- M200 (FTK1-01-0900PR only)  
- Quad OTDR, 850/1300 nm MM, 1310/1550 nm SM
- OPM5-2D  
- Optical Power Meter (Wave ID, Set Reference, Data Storage)
- OLS4  
- Optical Light Source (LED and Laser)
- OFS300-200  
- Optical Fiber Scope (200x)
- Fiber Rings  
- FR1-L5-150-SC-ST (50/125 Laser Optimized)
- FR1-L5-150-SC-LC (50/125 Laser Optimized)
- FR1-L5-150-ST-LC (50/125 Laser Optimized)
- FR1-M6-150-SC-ST (62.5/125)
- FR1-M6-150-SC-LC (62.5/125)
- FR1-M6-150-ST-LC (62.5/125)
- FR1-SM-150-SC-ST (SM)
- FR1-SM-150-SC-LC (SM)
- FR1-SM-150-ST-LC (SM)
- Adapters    
- SC, ST, LC for the OTDR/OLS ports (2 each)
- SC, ST, LC for the OPM Unit
- 2.5mm & 1.25mm Universal for OFS & for VFL on OTDR
- Jumpers, 2 meters in length (2 each)
 
- SC-ST (50/125 Laser Optimized)
- SC-LC (50/125 Laser Optimized)
- SC-ST (62.5/125)
- SC-LC (62.5/125)
- SC-ST (SM)
- SC-LC (SM)
- Bulkheads (mating adapters)
 
- SC/SC, ST/ST, LC/LC
- Cleaning Supplies

 
- FiberWipes™ Mini-tub
- Cletop -SB with white tape
- Cletop replacement tape (white)
- FCC2 Fiber Connector Cleaner
- Connector Cleaning Tips (for cleaning in sockets):
- 2.5 mm and 1.25 mm
- One-Click Cleaner SC/ST/FC
- One-Click Cleaner LC/MU
- Miscellaneous Accessories
 
- (2) Mandrels: 62.5mm, 3mm jacket & 50mm, 3mm jacket
- Stylus pen for the M200 touch screen
- USB thumb drive, 1G
- Plastic parts boxes to hold adapters (Qty 3)
- Case to hold up to 12 jumpers (2 – 5 meters in length)
- Report Software  
- Windows® compatible software and user guide


Reviews

Write a review | No reviews for this product.
AFL FTK1-01-0902PR FTK Pro Installer Kit (without M200)

AFL FTK1-01-0902PR FTK Pro Installer Kit (without M200)

 
SKU: FTK1-01-0902PR
Your Price: $6,905.00
 
 
  • Details
  • Reviews

The NOYES FTK Pro Installer Kit from AFL provides a wide selection of fiber optic testing, cleaning, and inspection equipment to enable technicians to install and maintain fiber optic networks. Available with multimode and single-mode test equipment, the kit also includes a broad array of cleaning and inspection equipment in a convenient tough injection-molded ABS carrying case. The Pro Installer Kit is ideal for TIA Tier 1 and Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTx PON networks.

  Features
- Clean, inspect, and test fiber optic networks
- Multimode and single-mode fiber ready
- Verify integrity of installed fiber networks
- Software to present network owners with written proof of a quality installation
- Convenient rugged hard carry case
   
  Applications
- Tier 1 and Tier 2 testing of premise networks
- FTTx PON certification and troubleshooting
- Fast fault location
- Splice verification
- Network documentation


  Kit Includes
- M200 (FTK1-01-0900PR only)  
- Quad OTDR, 850/1300 nm MM, 1310/1550 nm SM
- OPM5-2D  
- Optical Power Meter (Wave ID, Set Reference, Data Storage)
- OLS4  
- Optical Light Source (LED and Laser)
- OFS300-200  
- Optical Fiber Scope (200x)
- Fiber Rings  
- FR1-L5-150-SC-ST (50/125 Laser Optimized)
- FR1-L5-150-SC-LC (50/125 Laser Optimized)
- FR1-L5-150-ST-LC (50/125 Laser Optimized)
- FR1-M6-150-SC-ST (62.5/125)
- FR1-M6-150-SC-LC (62.5/125)
- FR1-M6-150-ST-LC (62.5/125)
- FR1-SM-150-SC-ST (SM)
- FR1-SM-150-SC-LC (SM)
- FR1-SM-150-ST-LC (SM)
- Adapters
 
- SC, ST, LC for the OTDR/OLS ports (2 each)
- SC, ST, LC for the OPM Unit
- 2.5mm & 1.25mm Universal for OFS & for VFL on OTDR
- Jumpers, 2 meters in length (2 each)
 
- SC-ST (50/125 Laser Optimized)
- SC-LC (50/125 Laser Optimized)
- SC-ST (62.5/125)
- SC-LC (62.5/125)
- SC-ST (SM)
- SC-LC (SM)
- Bulkheads (mating adapters)
 
- SC/SC, ST/ST, LC/LC
- Cleaning Supplies

 
- FiberWipes™ Mini-tub
- Cletop -SB with white tape
- Cletop replacement tape (white)
- FCC2 Fiber Connector Cleaner
- Connector Cleaning Tips (for cleaning in sockets):
- 2.5 mm and 1.25 mm
- One-Click Cleaner SC/ST/FC
- One-Click Cleaner LC/MU
- Miscellaneous Accessories
 
- (2) Mandrels: 62.5mm, 3mm jacket & 50mm, 3mm jacket
- Stylus pen for the M200 touch screen
- USB thumb drive, 1G
- Plastic parts boxes to hold adapters (Qty 3)
- Case to hold up to 12 jumpers (2 – 5 meters in length)
- Report Software  
- Windows® compatible software and user guide


Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.

Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband, long-haul fiber network test applications.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.

Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband, long-haul fiber network test applications.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.

Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband, long-haul fiber network test applications.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.

Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband, long-haul fiber network test applications.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multimode, 62.5 mm multimode, or single-mode fiber packaged in compact rings.

Fiber Rings of 150 m of fiber are ideal for premises fiber network test applications. Fiber Rings of 500 m and 1 km of single-mode fiber are designed for broadband, long-haul fiber network test applications.

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OLTS 5 Optical Loss Test Set series offers end-to-end single-mode testing at either 1310/1550 nm or 1550/1625 nm. The OLTS 5 may be operated in automatic or manual test modes. In its “two-unit” automatic test mode, a pair of OLTS 5 test sets may be used to measure the end-to-end, bi-directional insertion loss of a pair of single-mode fibers at 1310/1550 nm or 1550/1625 nm. Tests are started and controlled by the user from the OLTS 5 configured as the Main unit. Test progress messages and results are displayed on the Remote unit. Full test results can be reviewed and saved in the Main unit. Thresholds may be set to provide Pass/Fail results. In its “single-unit” automatic test mode the OLTS 5 can measure bi-directional, dual-wavelength insertion loss of patch cords, or fiber optic cables while they are still on the reel. In the manual operating mode individual OLTS 5 test sets can operate either as an optical power meter (OPM) or dual-wavelength laser source.

The OLTS 5 can store dual-wavelength, bi-directional insertion loss results for up to 1,000 fibers. Test results can be organized in up to 20 user-named files. Windows® compatible software is provided to view, edit, and print test results. OLTS 5 units are sold individually but normally used in pairs.

  Features
- Tier 1 certification to industry standards
- ISO/TIA/EN/User setable Pass/Fail thresholds
- Touch and Test™ user interface
- TRM™ reporting software
- Inspection capable

  Applications
- Certification of multimode and single-mode fiber networks
- Testing and Troubleshooting
- Document Tier 1 results in a professional report

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OLTS 5 Optical Loss Test Set series offers end-to-end single-mode testing at either 1310/1550 nm or 1550/1625 nm. The OLTS 5 may be operated in automatic or manual test modes. In its “two-unit” automatic test mode, a pair of OLTS 5 test sets may be used to measure the end-to-end, bi-directional insertion loss of a pair of single-mode fibers at 1310/1550 nm or 1550/1625 nm. Tests are started and controlled by the user from the OLTS 5 configured as the Main unit. Test progress messages and results are displayed on the Remote unit. Full test results can be reviewed and saved in the Main unit. Thresholds may be set to provide Pass/Fail results. In its “single-unit” automatic test mode the OLTS 5 can measure bi-directional, dual-wavelength insertion loss of patch cords, or fiber optic cables while they are still on the reel. In the manual operating mode individual OLTS 5 test sets can operate either as an optical power meter (OPM) or dual-wavelength laser source.

The OLTS 5 can store dual-wavelength, bi-directional insertion loss results for up to 1,000 fibers. Test results can be organized in up to 20 user-named files. Windows® compatible software is provided to view, edit, and print test results. OLTS 5 units are sold individually but normally used in pairs.

  Features
- Tier 1 certification to industry standards
- ISO/TIA/EN/User setable Pass/Fail thresholds
- Touch and Test™ user interface
- TRM™ reporting software
- Inspection capable

  Applications
- Certification of multimode and single-mode fiber networks
- Testing and Troubleshooting
- Document Tier 1 results in a professional report

Reviews

Write a review | No reviews for this product.
 
  • Details
  • Reviews

The OLTS 5 Optical Loss Test Set series offers end-to-end single-mode testing at either 1310/1550 nm or 1550/1625 nm. The OLTS 5 may be operated in automatic or manual test modes. In its “two-unit” automatic test mode, a pair of OLTS 5 test sets may be used to measure the end-to-end, bi-directional insertion loss of a pair of single-mode fibers at 1310/1550 nm or 1550/1625 nm. Tests are started and controlled by the user from the OLTS 5 configured as the Main unit. Test progress messages and results are displayed on the Remote unit. Full test results can be reviewed and saved in the Main unit. Thresholds may be set to provide Pass/Fail results. In its “single-unit” automatic test mode the OLTS 5 can measure bi-directional, dual-wavelength insertion loss of patch cords, or fiber optic cables while they are still on the reel. In the manual operating mode individual OLTS 5 test sets can operate either as an optical power meter (OPM) or dual-wavelength laser source.

The OLTS 5 can store dual-wavelength, bi-directional insertion loss results for up to 1,000 fibers. Test results can be organized in up to 20 user-named files. Windows® compatible software is provided to view, edit, and print test results. OLTS 5 units are sold individually but normally used in pairs.

  Features
- Tier 1 certification to industry standards
- ISO/TIA/EN/User setable Pass/Fail thresholds
- Touch and Test™ user interface
- TRM™ reporting software
- Inspection capable

  Applications
- Certification of multimode and single-mode fiber networks
- Testing and Troubleshooting
- Document Tier 1 results in a professional report

Reviews

Write a review | No reviews for this product.
PrevSet Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 Next NextSet