PrevSet Prev 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Next NextSet
| |
|
- |
InGaAs photo detector with 2.5mm universal
adapter port (for ST, SC, FC, and others) and 1.25mm universal
adapter port (for LC, MU, and other SFF) |
|
- |
Multimode and singlemode ready |
|
- |
Backlit graphic LCD display |
|
- |
Long battery life - over 100 hrs on one 9v
battery |
|
- |
Data storage for 1000 points including run
labels, fiber type, and site information including site name, date,
reference power values, fiber length, and number of splices and
interconnects |
|
- |
Auto-wavelength switching when used with OWL
WaveSource light sources |
|
- |
Built-in loss wizard for calculation of
maximum allowable loss values |
|
- |
USB interface for continuous data logging,
report printing, or data downloading |
|
- |
OWL Reporter software for printing formatted
fiber certification reports |
|
- |
Absolute or relative mode for giving you
instant pass/fail results |
|
- |
Selectively view, delete or resample data
points |
|
- |
Includes Visual Fault Locator (VFL) port for
near-end fault location and visual fiber identification |
| - |
Measurement range: +5 to -70dBm |
|
- |
Absolute accuracy1: +/- 0.15dB |
|
- |
Calibrated wavelengths: 850, 980, 1300, 1310,
1490, 1550, 1625 |
|
- |
Resolution: 0.01dB |
|
- |
Precision1: +/- 0.05dB |
|
- |
Dimensions: 4.94 x 2.75 x 1.28 in |
| |
Visual Fault Locator |
|
- |
Visual Range up to 5 km (3.1 mi.) |
|
- |
Optical Output ≥ 1mW |
|
- |
Output Modes CW / pulsed |
|
- |
Dimensions 4.94 x 2.75 x 1.28 in. |
|
- |
Weight 6 oz. |
|
|
| |
|
- |
1mm photo detector with 2.5mm universal adapter
(ST, SC, and FC) |
|
- |
Multimode and singlemode ready |
|
- |
Backlit graphic LCD display with intuitive user
interface |
|
- |
Simple 4-key operation |
|
- |
Power measurements shown in dBm, dB, or microwatts |
|
- |
Stores optical references for each wavelength to be
used for optical loss testing |
|
- |
Long battery life - over 250 hrs on one 9v battery |
|
- |
Data storage for 200 points |
|
- |
USB interface for continuous data logging, report
printing, or data downloading |
|
- |
OWL Reporter software for downloading data and
printing formatted fiber certification reports |
|
- |
Optional integrated visual fault locator (VFL) |
| - |
Measurement range +5 to -60dBm |
|
- |
Absolute accuracy1 +/- 0.15dB |
|
- |
NIST traceable calibrated wavelengths 850, 1300, 1310, 1550 nm |
|
- |
Additional calibrated wavelengths 1490 nm |
|
- |
Resolution 0.01dB |
|
- |
Precision1 +/- 0.05dB |
| - |
Dimensions 4.94 x 2.75 x 1.28 in |
|
|
| |
|
- |
1mm photo detector with 2.5mm universal
adapter port (for ST, SC, FC, and others) and 1.25mm universal
adapter port (for LC, MU, and other SFF connectors) |
|
- |
Multimode and singlemode ready |
|
- |
Backlit graphic LCD display with intuitive
user interface |
|
- |
Simple 4-key operation |
|
- |
Power measurements shown in dBm, dB, or
microwatts |
|
- |
Stores optical references for each wavelength
to be used for optical loss testing |
|
- |
Long battery life - over 250 hrs on one 9v
battery |
|
- |
Data storage for 200 points |
|
- |
USB interface for continuous data logging,
report printing, or data downloading |
|
- |
OWL Reporter software for downloading data
and printing formatted fiber certification reports |
|
- |
Integrated visual fault locator (VFL) |
|
- |
Measurement range +5 to -60dBm |
|
- |
Absolute accuracy1 +/- 0.15dB |
|
- |
NIST Calibrated Wavelengths 850,1300,
1310, 1490, 1550nm |
|
- |
Resolution 0.01dB |
|
- |
Precision1 +/- 0.05dB |
|
- |
Dimensions 4.94 x 2.75 x 1.28 in |
| |
Visual Fault Locator |
| - |
Visual Range up to 5 kilometers |
|
- |
Optical Output >= 1 mW red laser |
| - |
Optical Transmission Continuous Wave / Modulated |
|
|
| |
|
- |
Silicon photo detector with 2.5mm universal
adapter port (ST, SC, FC, and other 2.5mm connectors) |
|
- |
Multimode ready |
|
- |
Graphical LCD display with intuitive user
interface |
|
- |
Simple 2-key operation |
|
- |
Power measurements shown in dBm, dB, or
microwatts |
|
- |
Display resolution of 0.01 dB |
|
- |
Stores optical references for each wavelength
to be used for optical loss testing |
|
- |
Long battery life - up to 250 hrs on one 9v
battery |
|
- |
Charger port allows for wall power operation
or for charging 9-volt re-chargeable batteries |
|
- |
Upgradeable to fiber link certification and
reporting |
| |
Power Meter |
| - |
Measurement range +5 to -60dBm |
|
- |
Absolute accuracy1 +/- 0.25dB |
|
- |
NIST-Traceable Wavelengths 850nm |
|
- |
Additional Factory Calibrated Wavelengths
650nm, 980nm |
|
- |
Resolution 0.01dB |
|
- |
Linearity1 +/- 0.20dB |
| - |
Dimensions 4.94 x 2.75 x 1.28 in |
NOTE: applications such as Telco and CATV only require the use of an
optical power meter to measure optical power of their transmitters.
However, a majority of applications, such as optical loss measurements,
will require the user to have a stabilized light source.
OWL has several test kit options using the Silicon ZOOM 2 for multimode
testing.
|
|
| |
|
- |
Silicon photo detector with 2.5mm universal
adapter port (for ST, SC, FC, and others) |
|
- |
Multimode ready |
|
- |
Graphic LCD display with intuitive user
interface |
|
- |
Simple 2-key operation |
|
- |
Power measurements shown in dBm, dB, or
microwatts |
|
- |
Stores optical references for each wavelength
to be used for optical loss testing |
|
- |
Long battery life - over 250 hrs on one 9v
battery |
|
- |
Integrated visual fault locator (VFL) for
fiber identification and near-end fault detection |
| |
Power Meter |
|
- |
Measurement range +5 to -60dBm |
|
- |
Absolute accuracy1 +/- 0.25dB |
|
- |
NIST-Traceable Wavelengths 850nm |
|
- |
Additional Factory Calibrated Wavelengths 650nm, 980nm |
|
- |
Resolution 0.01dB |
|
- |
Linearity1 +/- 0.20dB |
|
- |
Dimensions 4.94 x 2.75 x 1.28 in |
| |
Visual Fault Locator |
| - |
Visual Range up to 5 kilometers |
|
- |
Optical Output >= 1 mW red laser |
| - |
Optical Transmission Continuous Wave /
Modulated |
|
|
| |
|
- |
InGaAs photo detector with 2.5mm universal
adapter (ST, SC, FC, and other 2.5mm connectors) |
|
- |
Multimode and singlemode ready |
|
- |
Graphical LCD display with intuitive user
interface |
|
- |
Simple 2-key operation |
|
- |
Power measurements shown in dBm, dB, or
microwatts |
|
- |
Display resolution of 0.01 dB |
|
- |
Stores optical references for each wavelength
to be used for optical loss testing |
|
- |
Long battery life - up to 250 hrs on one 9v
battery |
|
- |
Charger port allows for wall power operation
or for charging 9-volt re-chargeable batteries |
|
- |
Upgradeable to fiber link certification and
reporting |
| - |
Measurement range +5 to -60 dBm |
|
- |
Absolute accuracy1 +/- 0.15 dB |
|
- |
Calibrated wavelengths 850, 1300, 1310, 1490, 1550 nm |
|
- |
Resolution 0.01 dB |
|
- |
Linearity1 +/- 0.20 dB |
|
- |
Dimensions 4.94 x 2.75 x 1.28 in |
NOTE: applications such as Telco and CATV only require the use of an
optical power meter to measure optical power of their transmitters.
However, a majority of applications, such as optical loss measurements,
will require the user to have a stabilized light source.
OWL has several test kit options using the ZOOM 2, for multimode,
singlemode, or both.
|
|
| |
|
- |
InGaAs photo detector with 2.5mm universal
adapter port (for ST, SC, FC, and others) |
|
- |
Multimode and singlemode ready |
|
- |
Graphic LCD display with intuitive user
interface |
|
- |
Simple 2-key operation |
|
- |
Power measurements shown in dBm, dB, or
microwatts |
|
- |
Stores optical references for each wavelength
to be used for optical loss testing |
|
- |
Long battery life - over 250 hrs on one 9v
battery |
|
- |
Integrated visual fault locator (VFL) for
fiber identification and near-end fault detection |
| |
Power Meter |
|
- |
Measurement range +5 to -60dBm |
|
- |
Absolute accuracy1 +/- 0.15dB |
|
- |
Calibrated wavelengths 850, 1300, 1310,
1490, 1550nm |
|
- |
Resolution 0.01dB |
|
- |
Linearity1 +/- 0.20dB |
|
- |
Dimensions 4.94 x 2.75 x 1.28 in |
| |
Visual Fault Locator |
|
- |
Visual Range up to 5 kilometers |
|
- |
Optical Output >= 1 mW red laser |
| - |
Optical Transmission Continuous Wave /
Modulated |
|
|
| |
|
- |
Temperature-stabilized sources |
|
- |
Multimode and/or single-mode versions available |
|
- |
Optional integrated Visual Fault Locator (VFL) for multimode
only or single-mode only versions |
|
- |
SC or ST fiber connectors |
|
- |
Extended battery life - up to 30 hrs on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Intuitive 4-button interface |
|
- |
Continuous Wave (CW) or modulated mode |
|
- |
NIST traceable |
|
- |
Hand-held |
|
- |
Very economically priced |
|
- |
Output Power -20 dBm (multimode), -10 dBm (singlemode) |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm (multimode),
1310nm, 1550nm (singlemode) |
|
- |
Center Wavelength 850nm +30 / -10 nm (LED), 1300nm +/- 50nm
(LED), 1310nm +/- 20nm (Laser), 1550nm +/- 30nm (Laser) |
|
- |
Spectral Width 50nm @ 850nm (LED), 180nm @ 1300nm (LED), 2nm @
1310nm (Laser), 2nm @ 1550nm (Laser) |
|
- |
Operating Temperature -20 to +70 C |
|
- |
Storage Temperature -40 to +85 C |
| |
|
Multimode (Port A) |
Singlemode (Port B) |
| |
Part# |
Wavelengths |
Connectors |
Wavelengths |
Connectors |
| |
WS-MDSD |
850, 1300 |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MD |
850, 1300 |
ST, SC |
N/A |
N/A |
| |
WS-SD |
N/A |
N/A |
1310, 1550 |
ST, SC |
| |
WS-VSD |
650nm VFL |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MDV |
850, 1300 |
ST, SC |
650nm VFL |
ST, SC |
|
|
| |
|
- |
Temperature-stabilized sources |
|
- |
Multimode and/or single-mode versions available |
|
- |
Optional integrated Visual Fault Locator (VFL) for multimode
only or single-mode only versions |
|
- |
SC or ST fiber connectors |
|
- |
Extended battery life - up to 30 hrs on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Intuitive 4-button interface |
|
- |
Continuous Wave (CW) or modulated mode |
|
- |
NIST traceable |
|
- |
Hand-held |
|
- |
Very economically priced |
|
- |
Output Power -20 dBm (multimode), -10 dBm (singlemode) |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm (multimode),
1310nm, 1550nm (singlemode) |
|
- |
Center Wavelength 850nm +30 / -10 nm (LED), 1300nm +/- 50nm
(LED), 1310nm +/- 20nm (Laser), 1550nm +/- 30nm (Laser) |
|
- |
Spectral Width 50nm @ 850nm (LED), 180nm @ 1300nm (LED), 2nm @
1310nm (Laser), 2nm @ 1550nm (Laser) |
|
- |
Operating Temperature -20 to +70 C |
|
- |
Storage Temperature -40 to +85 C |
| |
|
Multimode (Port A) |
Singlemode (Port B) |
| |
Part# |
Wavelengths |
Connectors |
Wavelengths |
Connectors |
| |
WS-MDSD |
850, 1300 |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MD |
850, 1300 |
ST, SC |
N/A |
N/A |
| |
WS-SD |
N/A |
N/A |
1310, 1550 |
ST, SC |
| |
WS-VSD |
650nm VFL |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MDV |
850, 1300 |
ST, SC |
650nm VFL |
ST, SC |
|
|
| |
|
- |
Temperature-stabilized sources |
|
- |
Multimode and/or single-mode versions available |
|
- |
Optional integrated Visual Fault Locator (VFL) for multimode
only or single-mode only versions |
|
- |
SC or ST fiber connectors |
|
- |
Extended battery life - up to 30 hrs on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Intuitive 4-button interface |
|
- |
Continuous Wave (CW) or modulated mode |
|
- |
NIST traceable |
|
- |
Hand-held |
|
- |
Very economically priced |
|
- |
Output Power -20 dBm (multimode), -10 dBm (singlemode) |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm (multimode),
1310nm, 1550nm (singlemode) |
|
- |
Center Wavelength 850nm +30 / -10 nm (LED), 1300nm +/- 50nm
(LED), 1310nm +/- 20nm (Laser), 1550nm +/- 30nm (Laser) |
|
- |
Spectral Width 50nm @ 850nm (LED), 180nm @ 1300nm (LED), 2nm @
1310nm (Laser), 2nm @ 1550nm (Laser) |
|
- |
Operating Temperature -20 to +70 C |
|
- |
Storage Temperature -40 to +85 C |
| |
|
Multimode (Port A) |
Singlemode (Port B) |
| |
Part# |
Wavelengths |
Connectors |
Wavelengths |
Connectors |
| |
WS-MDSD |
850, 1300 |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MD |
850, 1300 |
ST, SC |
N/A |
N/A |
| |
WS-SD |
N/A |
N/A |
1310, 1550 |
ST, SC |
| |
WS-VSD |
650nm VFL |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MDV |
850, 1300 |
ST, SC |
650nm VFL |
ST, SC |
|
|
| |
|
- |
Temperature-stabilized sources |
|
- |
Multimode and/or single-mode versions available |
|
- |
Optional integrated Visual Fault Locator (VFL) for multimode
only or single-mode only versions |
|
- |
SC or ST fiber connectors |
|
- |
Extended battery life - up to 30 hrs on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Intuitive 4-button interface |
|
- |
Continuous Wave (CW) or modulated mode |
|
- |
NIST traceable |
|
- |
Hand-held |
|
- |
Very economically priced |
|
- |
Output Power -20 dBm (multimode), -10 dBm (singlemode) |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm (multimode),
1310nm, 1550nm (singlemode) |
|
- |
Center Wavelength 850nm +30 / -10 nm (LED), 1300nm +/- 50nm
(LED), 1310nm +/- 20nm (Laser), 1550nm +/- 30nm (Laser) |
|
- |
Spectral Width 50nm @ 850nm (LED), 180nm @ 1300nm (LED), 2nm @
1310nm (Laser), 2nm @ 1550nm (Laser) |
|
- |
Operating Temperature -20 to +70 C |
|
- |
Storage Temperature -40 to +85 C |
| |
|
Multimode (Port A) |
Singlemode (Port B) |
| |
Part# |
Wavelengths |
Connectors |
Wavelengths |
Connectors |
| |
WS-MDSD |
850, 1300 |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MD |
850, 1300 |
ST, SC |
N/A |
N/A |
| |
WS-SD |
N/A |
N/A |
1310, 1550 |
ST, SC |
| |
WS-VSD |
650nm VFL |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MDV |
850, 1300 |
ST, SC |
650nm VFL |
ST, SC |
|
|
| |
|
- |
Temperature-stabilized sources |
|
- |
Multimode and/or single-mode versions available |
|
- |
Optional integrated Visual Fault Locator (VFL) for multimode
only or single-mode only versions |
|
- |
SC or ST fiber connectors |
|
- |
Extended battery life - up to 30 hrs on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Intuitive 4-button interface |
|
- |
Continuous Wave (CW) or modulated mode |
|
- |
NIST traceable |
|
- |
Hand-held |
|
- |
Very economically priced |
|
- |
Output Power -20 dBm (multimode), -10 dBm (singlemode) |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm (multimode),
1310nm, 1550nm (singlemode) |
|
- |
Center Wavelength 850nm +30 / -10 nm (LED), 1300nm +/- 50nm
(LED), 1310nm +/- 20nm (Laser), 1550nm +/- 30nm (Laser) |
|
- |
Spectral Width 50nm @ 850nm (LED), 180nm @ 1300nm (LED), 2nm @
1310nm (Laser), 2nm @ 1550nm (Laser) |
|
- |
Operating Temperature -20 to +70 C |
|
- |
Storage Temperature -40 to +85 C |
| |
|
Multimode (Port A) |
Singlemode (Port B) |
| |
Part# |
Wavelengths |
Connectors |
Wavelengths |
Connectors |
| |
WS-MDSD |
850, 1300 |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MD |
850, 1300 |
ST, SC |
N/A |
N/A |
| |
WS-SD |
N/A |
N/A |
1310, 1550 |
ST, SC |
| |
WS-VSD |
650nm VFL |
ST, SC |
1310, 1550 |
ST, SC |
| |
WS-MDV |
850, 1300 |
ST, SC |
650nm VFL |
ST, SC |
|
|
| |
|
- |
Stable temperature compensated LED sources |
|
- |
Contains both commonly used multimode
wavelengths: 850 and 1300nm |
|
- |
Available with either ST or SC fiber
connectors (replace ‘xx’ at end of part number with ST or SC to
specify connector type) |
|
- |
Extended battery life - up to 30 hours on one
9v battery |
|
- |
Combination selected source / Low battery
indicator LEDs |
|
- |
Simple two-button operation |
|
- |
NIST traceable |
|
- |
Very economically priced |
| - |
Output Power -20 dBm into multimode |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm |
|
- |
Center Wavelength 850nm +30 /-10 nm, 1300nm +/- 50nm |
|
- |
Spectral Width 60nm @ 850nm, 180nm @ 1300nm |
|
- |
Typical 1 hour drift (dB) .05@850nm .05@1300nm |
| - |
Dimensions 4.94 x 2.75 x 1.28 in |
|
|
| |
|
- |
Stable temperature compensated LED sources |
|
- |
Contains both commonly used multimode
wavelengths: 850 and 1300nm |
|
- |
Available with either ST or SC fiber
connectors (replace ‘xx’ at end of part number with ST or SC to
specify connector type) |
|
- |
Extended battery life - up to 30 hours on one
9v battery |
|
- |
Combination selected source / Low battery
indicator LEDs |
|
- |
Simple two-button operation |
|
- |
NIST traceable |
|
- |
Very economically priced |
| - |
Output Power -20 dBm into multimode |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelengths 850nm, 1300nm |
|
- |
Center Wavelength 850nm +30 /-10 nm, 1300nm +/- 50nm |
|
- |
Spectral Width 60nm @ 850nm, 180nm @ 1300nm |
|
- |
Typical 1 hour drift (dB) .05@850nm .05@1300nm |
| - |
Dimensions 4.94 x 2.75 x 1.28 in |
|
|
| |
|
- |
Stable temperature compensated LED sources |
|
- |
Output wavelength: 850nm |
|
- |
Available with either ST or SC fiber connectors (replace ‘xx’ at
end of part number with ST or SC to specify connector type) |
|
- |
Extended battery life - up to 30 hours on one 9v battery |
|
- |
Combination selected source / Low battery indicator LEDs |
|
- |
Simple two-button operation |
|
- |
NIST traceable |
|
- |
Very economically priced |
| - |
Output Power -20 dBm into multimode |
|
- |
Initial Accuracy +/- .10dB @ 25 C |
|
- |
NIST traceable calibrated wavelength 850nm |
|
- |
Center Wavelength 850nm +30 /-10 nm |
|
- |
Spectral Width 60nm @ 850nm |
|
- |
Typical 1 hour drift (dB) .05@850nm |
| - |
Dimensions 4.94 x 2.75 x 1.28 in |
|
|
PrevSet Prev 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Next NextSet
|
