Field-Terminated M Series S66 Blocks are available in multiple configurations.

Center-to-center vertical spacing between rows of clips is 6.4mm (0.25 in.).

*All connecting blocks that use the 279MS quick clip have a tail pin that protrudes 3.3mm (0.13 in.) below the retainer base.

Siemon’s cable management rack system (RS) combines a 2.1m (7 ft.) x 19 inch black aluminum or steel rack with cable management accessories to provide a complete management solution. Ideal for all size installations, the rack features fully usable 45 RMS capacity. An optional 1.2m (4 ft.) power strip is available and mounts directly to rear of rack to provide power to active electronics.

- Header bars incorporate unique slotted holes for securing cable trays routed perpendicular to or parallel with RS racks
- High capacity twist-lock cable managers lock into place quickly without use of screws or mounting tools and can be easily located in many positions on the front, side, back, and within channel to provide customized cable management
- RS-07 shown with two VPC-6 Vertical Patching Channels (sold separately)
- Vertical Patching Channels are available in standard 152mm (6 in.) version or new high capacity 304mm (12 in.) version
- Mounting holes provided for anchoring rack to floor

*Not eligible for free shipping

Siemon has developed a rack for managing extra large volumes of horizontal cables. The new extended depth rack features vertical channels which are 0.37m (14.5 in.) deep. These channels include multiple mounting holes allowing the user to configure Siemon’s twist-lock hook and loop cable managers for properly managing large individual bundles of cables. The footers have also been designed to retain the 0.61m (24 in.) footprint.

*Not eligible for free shipping

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Siemon hinged stand-off brackets can be mounted to a wall with the hinge on either side for convenient access to the back of the panel. The sides of the brackets will accept our S144 or S145 cable hangers (see next page) for external cable management. The brackets accept any combination of Siemon patch panels and rack-mount cable management. Mounting hardware included.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Siemon’s RS series cable managers are designed for use with Siemon’s new vertical patching channel. The hinged cover extends across the vertical channels to fully conceal patch cords into the VPC.

Designed to mount directly to overhead ladder rack or cable tray, Siemon’s Cable Tray Rack delivers 4U of easily installed and accessible 19” rack mount space above cabinets and racks without consuming additional floor space, making it ideal for use as a Zone Distribution Area (ZDA) or Equipment Distribution Area (EDA) in data centers. Used with copper patch panels or fiber enclosures, the cable tray rack can increase cabling density, improve cable routing, simplify moves, adds and changes and provide pre-cabled connectivity for rapid deployment of new cabinets, racks and equipment.

- Improved Thermal Efficiency ­- Helps improve airflow by managing patching fields and cabling above cabinets and racks, minimizing obstruction of equipment cooling features.
- Rapid Data Center Deployment -­ Can be used in conjunction with Siemon’s
pre-terminated copper and fiber solutions to reduce installation time
- Open Compatibility -­ Rack mount solution attaches to all common overhead cable tray and ladder rack systems, including Siemon’s RouteIT system.

The multi-access horizontal cable manager design provides cable management for both the front and rear of the rack, is compact in size (1 RMS). The managers feature high capacity slots for entering and exiting cables with a single piece removable cover

The multi-access horizontal cable manager design provides cable management for both the front and rear of the rack, is compact in size (1 RMS). The managers feature high capacity slots for entering and exiting cables with a single piece removable cover