PrevSet Prev 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Next NextSet
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell’s new PROclick™ pre-polished SC and LC fiber connectors are a reliable, low cost field termination solution, eliminating adhesives and polishing. Hubbell’s PROclick™ pre-polished SC and LC connectors provide a quick, simple termination method, featuring a pre-installed cleaved fiber with an index-matching splice mechanism, and a precision factory pre-polished zirconia ceramic ferrule. Smooth fiber feed, and a micron-precision fiber alignment mechanism ensures a low loss, high yield termination.
Utilizing a proven fiber clamping method, PROclick™ SC and LC connectors perform under extreme
temperatures specified in Telcordia GR-326 standards. Termination can be completed in less than 1
minute. Simply insert the cleaved fiber into the connector, hold in place, and remove the wedge clip to close the fiber clamp. VFL confirmation after termination may be performed to assure optimum fiber
mating inside the splice element.
| |
Precision Low Loss, High Yield Pre-Polished Connector |
| |
Terminate in Less than 60 Seconds |
| |
CSI Specifications, Drawings and Advanced
Termination Tips Available |
| |
RoHS Compliant and Bulk Packed in Recyclable Cartons
|
| |
Specifications |
| - |
Insertion loss: 0.5dB (0.35dB typical), 0.75dB max |
| - |
Singlemode return loss: 55dB Typ, 40dB minimum |
| - |
Multimode return loss: 35dB Typ, 22dB minimum |
| - |
Operating temperature range: 0 ºC to +70 ºC |
| - |
Mating durability: 500 cycles <0.1dB change |
| - |
Ferrule: zirconia ceramic, UPC polish |
|
|
| |
Hubbell OFPM813 Power meter dual wavelength
|
|
| |
Hubbell OFSTRIP2 Universal Fiber Strip Tool
|
|
| |
Hubbell provides tools and testers to simplify 2CLICK® fiber installations. The OFTP05 tool pouch contains fiber preparation tools for 2CLICK®
non-adhesive terminations only.
| - |
Cleave tool allows for variable cleave lengths from 5 to 20mm. |
| - |
Cleave tool blade can execute thousands of cleaves before blade
replacement is necessary |
|
|
| |
Hubbell provides tools and testers to simplify 2CLICK® fiber installations. The OFTP05 tool pouch contains fiber preparation tools for 2CLICK®
non-adhesive terminations only.
| - |
Cleave tool allows for variable cleave lengths from 5 to 20mm. |
| - |
Cleave tool blade can execute thousands of cleaves before blade
replacement is necessary |
|
|
| |
Decorator frames provide a stylized look for that finishing touch. This allows all devices to match. Multimedia jacks insert into frame for custom configuration.
- Elongated strap for better wall box mounting
- High impact-resistant thermoplastic frame
- UL Listed 1863 - Communication Circuit Accessory and CSA Certified
|
|
| |
Hubbell IDF32 RE-BOX® – Commercial Equipment Cabinet, 32”H x 24.2”W x 10”D, Light Gray
|
|
PrevSet Prev 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Next NextSet
|
